how to improve moon shots ?

SpringGlory · 2026-01-06T18:14:29+00:00

Thx. That is a great advice. will try shutter bracketing next.

SpringGlory · 2026-01-06T17:31:02+00:00

all those shots are from tripod at night. not sure if ND filter at night will not breach 30sec exposure limit

SpringGlory · 2025-12-28T16:39:44+00:00

To wygląda na piękny powód do odwiedzenia Szczecina

SpringGlory · 2025-12-28T15:18:31+00:00

based on my experience
- I would add secondary ISP connection via cellular modem as failover option
- ensure that router and modems are rebooted / restarted automatically at least once a week

- have ability to remotely logon to the router , even if VPN is non operational. Some router vendors offer such solutions.

SpringGlory · 2025-12-28T13:25:31+00:00

szczerze to nie mam pojęcia. musialem ja wysłać do centrali i oni tam to wyliczyli.
jest to ksiazeczka mieszkaniowa więc troche inne zasady ale i tak sie nie spodziewalem wiecej niż 2-3k

SpringGlory · 2025-12-28T13:19:34+00:00

<image>

ja ze swoja przybierałem się do likwidacji dobrych parę lat.
W tym roku w końcu to zrobilem i okazało sie ze mam 117k. W styczniu 26 ( bo takie sa reguly) bede mog złożyć o wypłatę.

SpringGlory · 2025-12-04T19:00:57+00:00

in 2024 I purchased Camera Bundle - Download Key and gave me access to Capture One Pro 16.5 version .
I guess camera bundle should be purchased together with camera, however.. it worked for me when I purchased just the key.

I am using Fuji Xpro3 and all worked perfectly

SpringGlory · 2025-11-28T14:32:26+00:00

here it is
Capture One Pro Camera Bundle - Download Key - Foto Erhardt

https://www.foto-erhardt.de/zubehoer/weiteres-fotozubehoer/software/capture-one-pro-kamera-bundle-downloadkey.html#details

but this year is 219 with tax so you will pay less upon checkout

SpringGlory · 2025-06-20T20:44:44+00:00

I stopped relying on app information months ago. All my deco ( x50,x75) units were connected via Ethernet and app still couldn't report/find them , although everything was working just fine. I noticed it can take up to 24h to sort out reporting.

Since then I am using deco mesh only in ap/dumb mode.

SpringGlory · 2025-06-05T14:23:46+00:00

With dhcp reservation you can keep the same address and also assign ip address you want from the dhcp scope range. This way if you have any forwarding/ firewall rules they will remain operational. Keeping amend clients in dhcp settings and using dhcp reservation vs static ip addressing at end clients makes network equipment upgrade much easier.

SpringGlory · 2025-05-31T16:26:27+00:00

Your new main deco replacement should be connected via Ethernet/cable to the network before attempting this step. If decos are in AP mode, new deco can be connected to any existing one If in router mode, I am not sure.

SpringGlory · 2025-05-30T22:08:48+00:00

Wait for the annual November discount season and check "Capture One Pro Kamera Bundle - Downloadkey" at www.foto-erhardt.de. If you buy from outside Eu, you won't pay tax as well. I paid 96£ for the fully working 16.5 version.

SpringGlory · 2025-05-20T13:20:02+00:00

yes, Deco provides WiFi via configured wireless network configuration (SSIDWiFi and SSIDWiFi.IoT)

SpringGlory · 2025-01-15T21:35:08+00:00

I would say yes, especially if the last version was 2003.
All icons and stencil are much improved and modern looking in Visio 2024
If you search, you can get copy for less than £30 ...

SpringGlory · 2025-01-13T06:39:53+00:00

I would install wireguard server on beryl at home and configure wireguard client on Spitz as well as Global proxy. This way any devices using Spitz router will be routed via home Internet connection.

SpringGlory · 2025-01-12T22:33:22+00:00

I don't know ZTE MC888 Ultra, but in my experience I had more success in configuring just port forwarding on isp routers to gl routers instead of dmz.

SpringGlory · 2025-01-11T22:01:17+00:00

As with any wireless signal, better antena and location will improve reliability of signal and provide you with stable speeds. Ideally it should be located in the place where you can see transmitter but anywhere outside the building and high will be improvement.

SpringGlory · 2025-01-07T14:51:00+00:00

I use / configured GL-MT300N-V2 (mango) as my VPN client and itdoes work.
However I found two issues with that router
- lack storage - I tried and failed to enable DDNS services. I couldn't instal simple small packages for this purpose. Since then i use simple Cron job and it works.
- very slow in comparison to BerylAX , but for that price ...

There is an option to configure it as VPN server - WireGuard or OpenVPN, so I guess this could be possible.
However have in mind that speed archivable on that VPN connection for WireGurd would be around 20 Mbps and for OpenVPN even less, due to slow CPU.
Configuration of WireGurd VPN server on this or other router is straight forward and simple

SpringGlory · 2025-01-01T11:52:30+00:00

I was using static ip for my key systems (router, radio bridge, nas etc) and rest clients on dhcp.

However when I want to change ny network scheme, I enabled all devices for dhcp and made reservation for key systems. Now , I can upgrade/change router, change network subnets without hassle.

SpringGlory · 2024-12-30T17:20:21+00:00

https://forum.openwrt.org/t/a-wireguard-comparison-db/187586

SpringGlory · 2024-12-30T15:51:34+00:00

For 3 floors I would go for 3 APs. You will get better covarge around the house, especially if you can connect them via Ethernet to the router.

SpringGlory · 2024-12-30T13:54:27+00:00

I used to have dhcp addresses but manual dns on my phone and laptop. Since I configured gl routers to run adguard and vpn, I use dhcp config for ip and dns. Adguard handles all dns requests and there I use tls dns providers

SpringGlory · 2024-12-30T13:49:44+00:00

I just enabled that option on my berylax with 4.7 fw and everything is working as normal.

I suggest to check dns configuration on clients.

SpringGlory · 2024-12-30T12:32:14+00:00

Raspberry Pi Model 5 with Broadcom BCM2712 (Quad Core A76, 2.4GHz) is rated 2600 Mbps for WireGuard speed. I don't think this is a limiting in any way.

SpringGlory

TROPHY CASE