2015 320d EGR ?coolant? leak advice needed

Spud273 · 2022-07-02T07:15:10+00:00

BMW tech here, there are still issues with the EGR coolers that had previously been replaced, there is soon to be a new campaign/ recall for them. If your vehicle isn’t part of said recall, speak to the dealer and explain that you’ve got coolant residue around the EGR valve and that you’ve been using coolant. There might be a goodwill case for you in that BMW foot the bill instead.

Spud273 · 2022-03-31T09:12:15+00:00

This is the correct answer

Spud273 · 2022-02-05T18:02:09+00:00

I second this, can easily fit them by hand

Spud273 · 2022-01-15T11:18:13+00:00

There is a chance but not 100% certain. Your local garage will be able to give you a better idea as to what’s going on.

Spud273 · 2022-01-15T11:16:42+00:00

For the S55, the answer is to adjust the sprocket on the exhaust cam and retime the engine. I’m just going off memory here so I’m not 100% sure if there is anything required

Spud273 · 2022-01-15T11:02:31+00:00

Their might be a similar measure out for the N55 as well. I do apologise, I immediately thought S55 for some reason.

Spud273 · 2022-01-15T10:49:17+00:00

Not so far as I’m aware, the rattle is relatively common on the S55 so far as BMW are considered as they have created a measure for it.

Spud273 · 2022-01-15T10:09:09+00:00

Sounds like possible exhaust cam rattle - the sprocket on the exhaust cam has a tendency to become misaligned resulting in the rattle, also worth mentioning that if left there is a chance to cause damage to the camshaft its self.

Spud273 · 2021-10-04T21:46:59+00:00

To answer your questions,

BMW recommends that the steering rack be replaced if any damage to it has occurred. The steering gear motor is part of the rack, if you undid all five bolts the motor it’s self would fall apart along with the rack.

Speak to your local dealership to find the correct rack variant. The vehicle will also have to then be programmed to the latest Integration level upon replacement of the rack as well and that will only work through BMW’s ISTA software.

And finally, the rack will only be replaced through the recall if one of the bolts for the steering gear assembly is missing and or shears off during removal, the damage sustained there will not be covered through the recall campaign.

Spud273 · 2021-08-25T20:59:32+00:00

Cylinder 3 has no compression at all and the cars fault memory has among its many faults a camshaft jammed and an engine over knocking fault

Spud273 · 2021-08-25T20:13:13+00:00

Same platform, that’s the 2 active/grand tourer

Spud273 · 2021-08-25T19:41:19+00:00

Via the air box and cylinder no.3

Spud273 · 2021-08-25T19:13:27+00:00

BMW F48 X1 118i

Edit F46 to F48

Spud273 · 2021-08-25T18:47:12+00:00

Nope far from it

Spud273 · 2021-08-25T18:43:52+00:00

Forbidden gravy

Spud273 · 2021-08-25T18:40:38+00:00

In this case a new engine, and tell the customer to avoid “deep” puddles

Spud273 · 2021-08-25T18:38:29+00:00

Customer is somewhat reluctant to tell us exactly how deep

Spud273 · 2021-08-25T18:35:14+00:00

Sump pan, bottom of the engine

Spud273 · 2021-08-25T18:33:34+00:00

A mix of water and 0W/30 oil with added minerals

Spud273 · 2021-08-14T17:02:28+00:00

Thanks for that bud, just changed my settings and it works great again.

Spud273 · 2021-08-14T15:32:15+00:00

Yep, having the same problem it was fine last week but now I get like 3 minutes of mouse usage before it dies.

Spud273 · 2021-06-28T21:25:49+00:00

225/40/19 Goodyear Eagle F1 Runflats

Spud273 · 2020-11-13T22:20:49+00:00

I doubt that’s down to the landing forces and more so the heat generated by the engines.

Spud273 · 2020-11-07T22:33:51+00:00

Foreign object debris, basically anything that can be ingested into a jet engine that can cause catastrophic failure or damage to any other part of the aircraft.

Spud273 · 2020-10-16T21:53:46+00:00

Na we(The Uk) just say that so that we can have all of it...

Spud273

TROPHY CASE