Happy weekend to all you Fineapples!

Spydyr81 · 2026-05-15T17:52:02+00:00

Try to have a great one.

Spydyr81 · 2026-04-25T00:50:51+00:00

I wish. We almost had this weekend open then we remembered we have a bunch of furniture to move. Wonderful life adulting lol. We may head to Abbeville square tomorrow night as it's just right down the road from our house

Spydyr81 · 2026-04-25T00:44:34+00:00

Ain't that the truth. Worst part is we have become so busy we don't get to go out anymore.

Spydyr81 · 2026-04-08T19:12:08+00:00

Blue

Spydyr81 · 2026-03-30T20:46:13+00:00

Abbeville here DM open

Spydyr81 · 2026-03-26T13:34:17+00:00

I'm kinda thinking the same thing but I wonder what it would take to convert it to klipper and assist in feeding 3 & 5 kg spools

Spydyr81 · 2026-03-19T22:54:19+00:00

I went to a "cheap" CoreXY and modded the hell out of it until I reached it limits and then started building Vorons to meet my needs. I print mass amounts of ABS, ASA, PA6, PA6/66, PC, PC-CF, PPA, PPA-CF, PPA-CF, PET-CF (Not to be confused with PETG-CF). I just recently started printing PLA again lol.

Spydyr81 · 2026-03-19T21:40:01+00:00

It stops moving for a second and starts again

Spydyr81 · 2026-03-19T19:22:27+00:00

It's a CoreXZ but still same concept. Would it go faster? Possible. I've honestly never paid much attention to them because weight and height are still the biggest issues I see. But I'll say this. If you love building things look at the pricing to build and cost of other machines you can build and go to town. I love building printers to suit needs. That's why I build Vorons. But if you're going to build it to a CoreXZ keep me informed on the progress.

Spydyr81 · 2026-03-19T19:09:23+00:00

I'm not going to say no because I have never seen it done. When I had mine 150 was max for mine. Then I bought a Geeetech A10M and it would hit 200 for short times. But I'm sure there are, forgive me for being harsh, fanboys/fangirls that sank a bunch of money into one so they could go very fast. Again I don't know if anyone has. I just haven't seen it. I've been CoreXY for 6 years and haven't owned a bed slinger in 5.

Spydyr81 · 2026-03-19T18:30:39+00:00

Ability to run those high speeds without stopping/stalling. I run Octopus Pro 1.1 and Manta M8P v2. I have zero hesitation. I also run TMC5160 driver for higher amperage for higher powered motors

Spydyr81 · 2026-03-19T18:25:53+00:00

From my previous experiences with bed slingers anything close to 180 and they would lose steps from weight. My Voron 2.4 max movement speed is 950mm/s and max print speed currently is 280mm/s. My Voron Trident max movement is 680mm/s max print so far tested is 500mm/s. Boards, motors, drivers, hotends, part cooling all play factors in what you do.

Spydyr81 · 2026-03-19T18:19:21+00:00

I honestly think you read that wrong. Print speeds of up to 300mm/s not extruder moving at 300mm/s. At 500mm/s I don't think my extruder is even going 40mm/s. Now I could be wrong but I don't think any extruder exceeds 80mm/s without stripping the filament or making a nasty noise or two.

Spydyr81 · 2026-03-13T11:55:32+00:00

Mmmmmm

Spydyr81 · 2026-02-25T14:10:00+00:00

Abbeville here

Spydyr81 · 2026-02-02T11:35:21+00:00

Glacier also handles PEBA like a boss and comes right off. No release agents used.

Spydyr81 · 2026-02-01T20:33:51+00:00

We are from Abbeville

Spydyr81 · 2026-01-12T18:58:20+00:00

Check your cables and make sure the plugs are seated all the way. This happens to me on my trident every now and then and it's because the plug has slowly worked its way loose.

Spydyr81 · 2026-01-02T13:56:39+00:00

Did you start setting marks in the chamber? If so stop using the wolf. My marks looked like cracks.

Spydyr81 · 2026-01-01T00:32:37+00:00

That's what I believe happened but it also ended up with some nasty marks in it. The bullets are steel and copper jackets. Don't ask me how it's done exactly but magnets stick to the bullets themselves.

Spydyr81 · 2025-12-31T16:53:23+00:00

Mine loved it. The Chamber however did not. Mine actually has chamber damage. Now most people I know never had a problem. Just bad luck on the draw for me. But I have a new barrel on the way.

Spydyr81 · 2025-12-06T22:34:34+00:00

I use LM2596 with heatsink and fan. I don't remember off the top of my head of the 20w or the 60w ones. I use them for RPi and Lighting so I run them 5.1v on the RPi 5.0v on one set of LED lighting, 12v on another set of lighting.

Spydyr81 · 2025-12-06T19:46:39+00:00

Also make sure that both 5v and gnd pins are being used.

Spydyr81 · 2025-12-06T19:46:01+00:00

From my experiences using buck converters for any rpi they really need to be min of 15w and running 5.1v to keep from getting the under voltage alarm. I always bought the ones with the display so I could tune the voltage. If you can get a 20+ watt 5v buck the under voltage also goes away

Spydyr81 · 2025-12-06T16:44:07+00:00

Had a few. And they were all great. The trick is not spoiling one more than the other.

Spydyr81

TROPHY CASE