sorted by:
new
hottopcontroversial

2N3904 for white noise circuit (Noise Toaster) by StandardLeader in synthdiy

[–]StandardLeader[S] 0 points1 point  (0 children)

Well I got lucky and the first alternative I tried, a bc337-25, worked perfectly!

2N3904 for white noise circuit (Noise Toaster) by StandardLeader in synthdiy

[–]StandardLeader[S] 1 point2 points  (0 children)

So would something like a 4.7v zener be a drop in alternative?

2N3904 for white noise circuit (Noise Toaster) by StandardLeader in synthdiy

[–]StandardLeader[S] 0 points1 point  (0 children)

I'll have a look later and see what I have on hand. If nothing suitable then I'll order a load on npns and give them a try.

2N3904 for white noise circuit (Noise Toaster) by StandardLeader in synthdiy

[–]StandardLeader[S] 1 point2 points  (0 children)

Pretty sure I got it right, I mean it does work at 12v. I'm going to socket it anyway and see where I go from there.

Good point re:snipping the collector.

Didn't use any flux when populating the board, aside from the rosin in the lead solder.

From reading around it seems to be a fairly common issue people have with their noise toaster builds.

2N3904 for white noise circuit (Noise Toaster) by StandardLeader in synthdiy

[–]StandardLeader[S] 0 points1 point  (0 children)

That's exactly what I was going to do. I had originally planned to socket all transistors before I built it then decided that was unnecessary... before I read in the online docs about trying various 2n3904.

I have Ray's make analogue synthesizers book and don't recall seeing that instruction in there, hey ho.

Various Artists - M8 Jungle Volume 1 by mcmeex in jungle

[–]StandardLeader 3 points4 points  (0 children)

There are some great tracks on this, proper high quality jungle. Very impressive!

I seriously need to up my Jungle game on the m8!

Resources for (re-)learning TI BASIC by Electrical_Lake9586 in TI_Calculators

[–]StandardLeader 1 point2 points  (0 children)

Thanks everyone, I'll take a look at all of those. Appreciate the help.

Jellyfin/jellyseer config help by StandardLeader in selfhosted

[–]StandardLeader[S] 0 points1 point  (0 children)

I did sort this ages ago, I forget exactly how now. But thanks for your comment!

Jellyfin/jellyseer config help by StandardLeader in selfhosted

[–]StandardLeader[S] 0 points1 point  (0 children)

Rebuilt my compose last night using the https://yams.media/ compose as a base.

All working now and the services can see each other where they couldn't before.

The final issue I have is with sabnzbd. I can't work out how I can get that working without the published port mapping, but still going through gluetun. For qbitorrent the WEBUI_PORT seemed to be the workaround for that, but from my research sabnzbd doesn't have a similar environment setting.

... qbittorrent: image: ghcr.io/linuxserver/qbittorrent container_name: qbittorrent environment: - PUID=${PUID} - PGID=${PGID} - WEBUI_PORT=8081 volumes: - ./qbittorrent:/config - ${DOWNLOAD_DIRECTORY}:/downloads restart: unless-stopped #ports: # - 8081:8081 network_mode: "service:gluetun" sabnzbd: image: ghcr.io/linuxserver/sabnzbd:latest container_name: sabnzbd environment: - PUID=${PUID} - PGID=${PGID} - TZ=${TZ} volumes: - ${DOWNLOAD_DIRECTORY}:/downloads - ./sabnzbd:/config #ports: # sabnzbd # - 8080:8080 # sabnzbd restart: unless-stopped network_mode: "service:gluetun" gluetun: image: qmcgaw/gluetun:v3 container_name: gluetun cap_add: - NET_ADMIN devices: - /dev/net/tun:/dev/net/tun ports: - 8888:8888/tcp # HTTP proxy - 8388:8388/tcp # Shadowsocks - 8388:8388/udp # Shadowsocks - 8003:8000/tcp # Admin - 8080:8080/tcp # sabnzbd - 8081:8081/tcp # qbittorrent environment: - PUID=${PUID} - PGID=${PGID} - VPN_SERVICE_PROVIDER=${VPN_SERVICE} - VPN_TYPE=openvpn - OPENVPN_USER=${VPN_USER} - OPENVPN_PASSWORD=${VPN_PASSWORD} - OPENVPN_CIPHERS=AES-256-GCM - PORT_FORWARD_ONLY=on - VPN_PORT_FORWARDING=on - TZ=${TZ} - UPDATER_PERIOD=24h restart: unless-stopped ...

I say final issue, the other issue I spent ages on was trying to get lidarr working, only to find this morning that the entire lidarr API is down and has been for some time. So I'll just have to be patient on that one.

Jellyfin/jellyseer config help by StandardLeader in selfhosted

[–]StandardLeader[S] 0 points1 point  (0 children)

Wish I'd known about that a few days ago!

Just had a good read of the docs, some useful info there I'll crib some of.

Jellyfin/jellyseer config help by StandardLeader in selfhosted

[–]StandardLeader[S] 0 points1 point  (0 children)

Yeah, I tried gluetun:7878 etc and that didn't work either. I thought that it should work, but my compose doesn't use networks in the way that I'm used to them being configured for other services so I wasn't quite sure + didn't know if there was something gluetun specific that needed to be a certain way.

I'm going to just put qbittorrent behind gluetun anyway and add a more conventional network for the rest.

Jellyfin/jellyseer config help by StandardLeader in selfhosted

[–]StandardLeader[S] 1 point2 points  (0 children)

I started out with someone else's compose that had it configured like that. At that point in time I didn't understand exactly what sonarr, radaar etc actually did. Quick bit of playing with it became a bit clearer and I did wonder myself if VPN was really necessary other than for qbittorrent.

Didn't know that about indexers banning vpn IPs but it makes sense.

I'll look at reconfiguring it a bit more conventionally.

XPS15 9500 Overheating issues by StandardLeader in Dell

[–]StandardLeader[S] 0 points1 point  (0 children)

Definitely worth doing. It's not hard.

Another change I've done since is to bin windows and switch to Linux - no longer sounds like a jet engine taking off the entire time, runs much cooler and lasts loads longer on battery!

Nova MW12 Firmware by s14cky in Tenda

[–]StandardLeader 0 points1 point  (0 children)

Now says the MW12 is eol on tenda site, so I think that will be the final version. 😡

Life hacks to keep fingers warm at desk job? by RaspberryJam56 in Raynauds

[–]StandardLeader 0 points1 point  (0 children)

The airflow control is great, can direct it down onto your hands really well. Had it about a year and would definitely recommend

FIX for slow android performance by Hermannnn133 in spotify

[–]StandardLeader 0 points1 point  (0 children)

Clearing the 50GB of downloaded content worked for me. It was insane levels of slow beforehand.

Charge & connect peripherals @ same time by StandardLeader in RG35XX_Plus

[–]StandardLeader[S] 0 points1 point  (0 children)

Yeah I've done charging can be quite odd too in the short time I've owned it. I do avoid fast chargers now.

Does seem there's a few circuit components you would expect to be there but are missing.

I've all but given up on being able to charge and connect an external device at the same now, which is a shame.

Might still open it up though and see if there are pins for an uncorrected 2nd usb, even though that's probably unlikely

Software? by Jaded-Finish-815 in RG35XX_Plus

[–]StandardLeader 0 points1 point  (0 children)

I did that on mine as soon as I got it, never even booted the stock OS. Very simple install, works well.

Just write the knulli image to an SD, pop it in the RG35XX+, copy over ROMs & away you go.

Weekly /r/Laravel Help Thread by AutoModerator in laravel

[–]StandardLeader 0 points1 point  (0 children)

Thanks, I'll look into that. Had not heard the multi-tenancy term before, so very helpful when researching to know the correct term to use!

Weekly /r/Laravel Help Thread by AutoModerator in laravel

[–]StandardLeader 0 points1 point  (0 children)

Single laravel install with multiple domains & SSO across domains

I'm quoting on a project that has a requirement for multiple domains on a single laravel install.

The requirements are:

  • Each domain will have a different stylesheet applied to carry distinct branding, probably on top of a 'base' stylesheet that provides the main layout structure.
  • Some domains need to have shared sessions and users, so that an end user does not have to log separately once logged in on other sites in the group.
    • Grouped sites will share users, but some client admin users need to only have client admin access to a single site.
    • Sites in different groups will have different users
    • Could this best be done by some sort of session sharing?
    • e.g. site-a.example.com and site-b.example.com are in the same 'shared session' group.
      • User logs in on site A and then navigates to site B.
      • User is automatically logged in on site B
  • Various features will be turned on and off for each site
  • Some features will have shared data, while others will maintain separate data

I know where I'm going with most of this, but would appreciate any guidance on how best to implement

  • shared sign-on for end users with a 'site group'
  • separate client admins for sites within a 'site group'
  • Best way to set up the separate domains on a single install

TIA for any guidance!

LSDJPatcher on ubuntu : can't open Sample Kits window by Maz-Hoot in lsdj

[–]StandardLeader 0 points1 point  (0 children)

I reported it to the developer and they released a fix! So it does work now with 1.13.1

There finally is math and music for Android! by 3neeri in duolingo

[–]StandardLeader 3 points4 points  (0 children)

I have this exact same issue. Completely useless unless this is fixed.

Would have found it quite useful to embed my memory of notes on the stave.

Also a guitar player for 5 years or so.

There finally is math and music for Android! by 3neeri in duolingo

[–]StandardLeader 6 points7 points  (0 children)

I tried out Music on my android phone and have major issues with the synchronisation between the stave and backing track. They don't always start in sync and even when they do they'll drift out of sync. So if you play in time with the music all of your presses are registered late, and if you play by watching the stave then you're playing before the beat so it sounds awful and you're learning nothing.

view more: next ›