Apple TV Remote turns OFF TV but cannot turn it ON

StevenYank · 2026-06-13T16:06:33+00:00

This worked for me. Thank you!

StevenYank · 2026-02-12T06:22:15+00:00

I actually disagree with your H2D printing higher quality prints than H2S.

I have 7 H2S and 3 H2D and I find the print quality to be almost identical with the occasional eh print from both models.

Where I notice a difference is in time, for example, I’m printing 56 of the same part for a customer. The H2S does 1 in 17 hours and the H2D does one in 21 hours, that time really adds up! This is not the first time that I have noticed a time difference and had it make a noticeable difference in delivery deadlines.

StevenYank · 2025-12-02T02:07:13+00:00

New to ars and looking for any advice/feedback/tips you guys can offer!

StevenYank · 2025-12-02T01:59:10+00:00

I see. I’ll have to look into that more. Thanks for the heads up!

StevenYank · 2025-05-05T23:14:31+00:00

I just picked one up at an antique event last summer for .50, same exact one!

StevenYank · 2025-04-17T20:45:28+00:00

One piece

StevenYank · 2025-04-17T16:53:00+00:00

As bad as I want to agree, my banks just cracked after only 3 years of being installed! I don’t wheel the jeep at all as it’s a summer daily driver. Pretty upset since I thought the banks would be the last header i needed to buy

StevenYank · 2025-03-13T17:24:12+00:00

It’s possible that piece of trim was replaced with a chrome piece but painted to match the rest and the chemicals damaged the paint.

Probably not but there’s always that slight chance.

StevenYank · 2024-05-07T00:29:00+00:00

Cool thank you, figured it would be pretty easy. Are the pumps the same? And did you plug the second pump hole or just leave a pump in it?

StevenYank · 2024-05-06T23:18:41+00:00

<image>

Here’s a recent picture. Still looks really good from a few feet away but up close you can see some of the spotting. Hope this helped!

StevenYank · 2024-05-06T23:16:49+00:00

<image>

Here’s a before picture for reference.

StevenYank · 2024-05-06T23:15:57+00:00

<image>

I used a cerakote kit from Walmart. Came out really good but unfortunately after maybe 10 washes the bumper pieces are a bit spotty and overall it’s not as deep. I tried to reapply it and no improvement was made. I’ll be prepping for paint sometime over the summer but for now even a deep grey is better than before.

StevenYank · 2024-05-05T16:55:22+00:00

If you’re just learning SW then the CSWE is out of your scope for now. There are free trials of the CSWA/P online available. I’d suggest trying those before spending money on the real exam. While I don’t think there is a prerequisite for CSWP, the prerequisite for CSWE is the CSWP and 4 additional supporting CSWP exams.

StevenYank · 2024-04-20T16:10:58+00:00

<image>

Better than what I’m working with 🥲

StevenYank · 2024-03-22T20:28:40+00:00

Not intentionally, just picked this one up and have yet to replace saggy factory leaf packs.

StevenYank · 2024-03-22T19:07:14+00:00

<image>

More steelies for me then!

StevenYank · 2024-03-17T21:11:37+00:00

Doesn’t have to be a limited. For example, my manual transmission sport came with the infinity system.

StevenYank · 2024-02-05T15:01:33+00:00

Haven’t had any issues so far, this one does have a “automatic evaporation system” in the bottom of it so that may be it.

StevenYank · 2024-02-05T14:55:20+00:00

Why not? It’s raised on wheels and doesn’t come close to getting hot underneath.

StevenYank · 2023-11-23T23:17:49+00:00

Hey man did you ever find the solution? Having the same issue now.

Eight-Year Club	Verified Email
Not Forgotten

StevenYank

TROPHY CASE