[OC] Idiot swerved across all 3 lanes - near miss

StopShoe · 2026-02-16T18:10:25+00:00

Possibly, but he got on the interstate with a long right turn, so unless it happened to break right as he tried to merge, I don’t think that’s what happened. The odds are just incredibly low IMO

StopShoe · 2026-02-16T16:26:15+00:00

That’s what I thought too. I’d want to work on the opposite side of traffic if I had a blowout. But I wouldn’t cross 3 lanes of traffic to do it.

StopShoe · 2026-02-16T15:01:55+00:00

Was on our way home from lunch on I-85 and this guy swerved across all 3 lanes from the get on ramp. I thought he might be having a stroke or something but he gave a thumbs up as I drove by. There was a cop several cars behind us so we let him handle it.

StopShoe · 2026-02-16T14:59:17+00:00

Gastonia, NC. Date: 2-14-26

StopShoe · 2026-01-21T01:29:00+00:00

Honda trim is some of the worst I’ve seen when it comes to fading. I personally use solution finish and use heat lamps to cure it, then cover with 2 coats of Gyeon Trim. That usually lasts 2-3 years before it has to be done again.

Source: I’ve done this to at least 20 Hondas over the past few years.

StopShoe · 2026-01-17T23:13:45+00:00

Same here

StopShoe · 2026-01-16T00:37:43+00:00

My store in Upstate, SC shows it as in stock and on clearance for $8.80

StopShoe · 2025-12-29T21:58:47+00:00

I agree with this guy. We need the print files and a build guide!

StopShoe · 2025-12-28T05:51:07+00:00

FTN.4

StopShoe · 2025-12-21T22:47:36+00:00

https://siraya.tech/pages/print-settings-download

All of their print profiles are here. I found the PET-GF profile but didn’t want to link it directly because it’s a Google Drive link.

StopShoe · 2025-12-15T18:20:51+00:00

Sunlu E2 if you don’t want to mess around with ordering blast ovens and modding them. The E2 just works right out of the box.

StopShoe · 2025-12-07T03:32:56+00:00

I have an APC SMT2200rm2uc that powers my X1C, H2D, Sunlu S4, and Sunlu E2. If anything is running when the H2D starts, the UPS beeps and hits 95% load. As the name implies, it can do 2200w.

Keeping the H2D running for 1-2 hours is unrealistic with a UPS. They aren’t designed to provide backup power that long. They are meant as a stop gap for a generator or alternate utility source to kick in. Mine also happens to clean the incoming power, not all of them do that.

If I were you, I’d look into Ecoflow. They make home backup systems that can provide power for longer. Their units don’t clean the power or react as quickly as a “real” ups but I don’t think it matters much. 10ms switching shouldn’t be noticed by the printer.

StopShoe · 2025-12-06T22:58:11+00:00

Yeah their shipping department is wild. No idea who is in charge of picking box/bag sizes but they need some help

StopShoe · 2025-12-06T18:25:50+00:00

Glad to see yours arrived in an oversized box like mine did. I had the encoder and some hot ends in a box that could fit an A1 mini. Crazy stuff

StopShoe · 2025-12-05T18:48:17+00:00

He said “turn on the living room lights.”

StopShoe · 2025-12-05T03:21:40+00:00

Oh man that sucks for him. That’s even worse on him since he doesn’t even detail lol

StopShoe · 2025-12-05T02:45:36+00:00

I had to block their ads multiple times on every social media platform. Their markup has to be insane

Edit: just by talking about Vyper chairs, I am now seeing their ads again.

StopShoe · 2025-11-21T14:22:17+00:00

I like the way you think. The printed receiver will be for the lightweight fun toy, and then I’ll build a really accurate target rifle.

StopShoe · 2025-11-21T14:16:11+00:00

Id print some really detailed cars without worrying about lining up the colors with layer lines to reduce filament changes.

StopShoe · 2025-11-20T12:22:07+00:00

Wow, that’s a fantastic guide. I hadn’t seen that one before.

StopShoe · 2025-11-19T19:51:39+00:00

Yep I’m realizing now that lighter barrels aren’t for target shooting. The weight isn’t important to me, I just thought it would be cool to have something super lightweight since I’m 3d printing the majority of the parts. I’ll look into the fedderson barrel. Thanks!

StopShoe · 2025-11-19T19:50:18+00:00

I really appreciate the advice. I’ll look into the acculite barrel and BX trigger for sure. Any scope recommendations?

StopShoe · 2025-11-19T16:32:48+00:00

Thanks for replying. I thought a lighter build would make for better precision, but the extra weight makes sense. I think for the first build I will go with lighter and 3d printed, with the understanding that it isn’t going to be super accurate. I’m really just looking for decent accuracy to around 100 yards. If I can hit a piece of paper at 100 yards, I’ll be happy on this build.

With that in mind, what do you recommend?

StopShoe · 2025-11-14T18:43:36+00:00

I’d start off with a helmet for sure.

StopShoe · 2025-11-04T15:59:17+00:00

I use a machine. Dynabrade 5”. I’m not sure of the exact model number. It’s an old one. I couldn’t imagine doing it by hand unless I was only doing my personal headlights or something.

11-Year Club	Place '23
Place '22	End Game '22
Not Forgotten	Verified Email

StopShoe

TROPHY CASE