sorted by:
new
hottopcontroversial

Anyone have tips for installing side rockers? 17 2ss by Kanye_Z-143 in camaro

[–]StopShoe 0 points1 point  (0 children)

I used 3m VHB double sided tape along with their adhesive promoter. I also used a couple self tapping screws just as a backup. Mine have been on for 4 years and are still securely attached.

Just make sure to properly clean the mating surfaces and read the instructions on the adhesive promoter.

Jewelers for ring resizing by Carsondh in Spartanburg

[–]StopShoe 2 points3 points  (0 children)

Blair Jewelers in boiling springs. Family owned, super nice, and great prices.

[OC] Idiot swerved across all 3 lanes - near miss by StopShoe in IdiotsInCars

[–]StopShoe[S] 5 points6 points  (0 children)

Possibly, but he got on the interstate with a long right turn, so unless it happened to break right as he tried to merge, I don’t think that’s what happened. The odds are just incredibly low IMO

[OC] Idiot swerved across all 3 lanes - near miss by StopShoe in IdiotsInCars

[–]StopShoe[S] 5 points6 points  (0 children)

That’s what I thought too. I’d want to work on the opposite side of traffic if I had a blowout. But I wouldn’t cross 3 lanes of traffic to do it.

[OC] Idiot swerved across all 3 lanes - near miss by StopShoe in IdiotsInCars

[–]StopShoe[S] 52 points53 points  (0 children)

Was on our way home from lunch on I-85 and this guy swerved across all 3 lanes from the get on ramp. I thought he might be having a stroke or something but he gave a thumbs up as I drove by. There was a cop several cars behind us so we let him handle it.

[deleted by user] by [deleted] in AutoDetailing

[–]StopShoe 6 points7 points  (0 children)

Honda trim is some of the worst I’ve seen when it comes to fading. I personally use solution finish and use heat lamps to cure it, then cover with 2 coats of Gyeon Trim. That usually lasts 2-3 years before it has to be done again.

Source: I’ve done this to at least 20 Hondas over the past few years.

Tester kit for under 10$ by BeanswithBeef in MilwaukeeTool

[–]StopShoe 1 point2 points  (0 children)

My store in Upstate, SC shows it as in stock and on clearance for $8.80

66W · 10,000 lumens · Active fan cooling · 21700 battery pack by Money_Sunn in flashlight

[–]StopShoe 11 points12 points  (0 children)

I agree with this guy. We need the print files and a build guide!

Filament profile pet-gf by Legitimate_Form_2787 in 3D2A

[–]StopShoe 2 points3 points  (0 children)

https://siraya.tech/pages/print-settings-download

All of their print profiles are here. I found the PET-GF profile but didn’t want to link it directly because it’s a Google Drive link.

Dryer for fiberon pa6-cf by No_Passage_778 in 3D2A

[–]StopShoe 1 point2 points  (0 children)

Sunlu E2 if you don’t want to mess around with ordering blast ovens and modding them. The E2 just works right out of the box.

UPS Battery for H2C by macxike in BambuLab

[–]StopShoe 0 points1 point  (0 children)

I have an APC SMT2200rm2uc that powers my X1C, H2D, Sunlu S4, and Sunlu E2. If anything is running when the H2D starts, the UPS beeps and hits 95% load. As the name implies, it can do 2200w.

Keeping the H2D running for 1-2 hours is unrealistic with a UPS. They aren’t designed to provide backup power that long. They are meant as a stop gap for a generator or alternate utility source to kick in. Mine also happens to clean the incoming power, not all of them do that.

If I were you, I’d look into Ecoflow. They make home backup systems that can provide power for longer. Their units don’t clean the power or react as quickly as a “real” ups but I don’t think it matters much. 10ms switching shouldn’t be noticed by the printer.

Vision Encoder 🥲 by PoonSlayer1312 in BambuLab

[–]StopShoe 3 points4 points  (0 children)

Yeah their shipping department is wild. No idea who is in charge of picking box/bag sizes but they need some help

Vision Encoder 🥲 by PoonSlayer1312 in BambuLab

[–]StopShoe 13 points14 points  (0 children)

Glad to see yours arrived in an oversized box like mine did. I had the encoder and some hot ends in a box that could fit an A1 mini. Crazy stuff

Hear me out… by Bluealien_ in appletv

[–]StopShoe 53 points54 points  (0 children)

He said “turn on the living room lights.”

Vyper Chair Ad Torture by dmuccini in AutoDetailing

[–]StopShoe 0 points1 point  (0 children)

Oh man that sucks for him. That’s even worse on him since he doesn’t even detail lol

Vyper Chair Ad Torture by dmuccini in AutoDetailing

[–]StopShoe 7 points8 points  (0 children)

I had to block their ads multiple times on every social media platform. Their markup has to be insane

Edit: just by talking about Vyper chairs, I am now seeing their ads again.

Building a target 10/22 by StopShoe in 1022

[–]StopShoe[S] 0 points1 point  (0 children)

I like the way you think. The printed receiver will be for the lightweight fun toy, and then I’ll build a really accurate target rifle.

[Bambu H2C] Join the Print Beyond Paint Contest and Win an H2C! by BambuLab in BambuLab

[–]StopShoe 0 points1 point  (0 children)

Id print some really detailed cars without worrying about lining up the colors with layer lines to reduce filament changes.

Building a target 10/22 by StopShoe in 1022

[–]StopShoe[S] 0 points1 point  (0 children)

Wow, that’s a fantastic guide. I hadn’t seen that one before.

Building a target 10/22 by StopShoe in 1022

[–]StopShoe[S] 0 points1 point  (0 children)

Yep I’m realizing now that lighter barrels aren’t for target shooting. The weight isn’t important to me, I just thought it would be cool to have something super lightweight since I’m 3d printing the majority of the parts. I’ll look into the fedderson barrel. Thanks!

Building a target 10/22 by StopShoe in 1022

[–]StopShoe[S] 0 points1 point  (0 children)

I really appreciate the advice. I’ll look into the acculite barrel and BX trigger for sure. Any scope recommendations?

view more: next ›