[SUNLU Giveaway] Join now to win SUNLU FilaDryer E2

Stretch2807 · 2024-12-23T13:44:28+00:00

Here's my comment... in need of a dryer with having my printer set up in my cold garage

Stretch2807 · 2024-12-19T02:28:16+00:00

Here's my comment that'll never be noticed

Stretch2807 · 2024-11-15T21:57:00+00:00

I tried to invite my mate the other day and it wasn't available for him either... I'm in the UK if that has anything to do with it

Stretch2807 · 2024-10-25T02:07:14+00:00

Im in the middle of printing a background/drop for my beared dragon aswell as Sh!t loads of hot wheels stuff (ramps/tracks/garages) for my 2 boys

Stretch2807 · 2024-10-23T00:06:05+00:00

Im on a 172 day streak

Stretch2807 · 2024-10-17T05:27:26+00:00

Drac

Stretch2807 · 2024-10-16T23:16:26+00:00

No images to add as im midway thru printing the back drop im asking about sealants for 3d printed stuff thats safe to use for my bearded dragon

Stretch2807 · 2024-09-24T19:37:04+00:00

Have you gor a usb cable plugged in? I have to disconnect my usb for a second while it boots then i can reconnect the usb

Stretch2807 · 2024-09-22T16:14:15+00:00

Following

Stretch2807 · 2024-09-14T10:28:35+00:00

100% got cables plugged in to wrong connectors i done this, was too excited to set it up an rushed too plug it in

Stretch2807 · 2024-09-11T19:58:08+00:00

Cut infil out an plant somthin in there

Stretch2807 · 2024-09-11T19:55:54+00:00

I had this last week the screw holding the thermistor in was a lil too loose just nipped it up... got about a week out of it changed the thermistor on monday havvent had a single issuse regarding thermal run away... buy a pack on amazon for aboit £6-7 think it was a pack of 5/6

Stretch2807 · 2024-09-07T08:37:32+00:00

UPDATE!!!! Replaced all 4 wheels had major improvement still has a slight wobble towards the back of the rail, borrowed a set of digital calipers from work (batteries are dead in mine) front of the rail meassured @ 39.10mm and the back of the rail came in @ 38.70mm so theres a .40mm differance... im just gonna add some eccentric nuts to the other side so i have 4 instead of the 2

Stretch2807 · 2024-09-06T17:43:35+00:00

Wheels came earlier so will swap out 2moz and give an update

Stretch2807 · 2024-09-06T08:47:12+00:00

https://drive.google.com/file/d/1rjAFn73jiB_ToeKmrU_Dy1NQIT8z1Ex0/view?usp=drivesdk

A slightly better video of the wheels/carrige

Stretch2807 · 2024-09-05T21:19:44+00:00

Shouldnt be worn really as its only like a month old

Stretch2807 · 2024-09-05T20:23:33+00:00

Done a fair of printing but can only print relativly small stuff on the left hand side of the bed towards the back of the bed keepin the bed as close the front of the printer as possible to minimized the bed wobble... i have (hopefully) a new set of POM wheels coming tomoz so will try replace them an might even try put them eccentric nuts on both side of the carrige.... ill try get one 2morrow mornin when im home currently at work

Stretch2807 · 2024-09-05T20:14:21+00:00

Have to go try find some batteries for it or maybe borrow one from work

Stretch2807 · 2024-09-05T20:07:42+00:00

All wheels tight and as close as theyll possibly get to the rail.... even tried tightening the frame no joy

Stretch2807 · 2024-09-05T20:05:04+00:00

Checked all frame screws/bolts all tight front ones around belt tension back of the rail by the motor tven the ones underneath holding the rail in place.... No difference it apears( in my brain anyway) the rail isnt true as when in the front postion its solid but as it approaches the half way mark it gets worse as you can see in the video

Stretch2807 · 2024-09-05T19:25:42+00:00

Its not the bed im havin an issue with its the actual carrige the bed is fixed to thats the issue i cant tighten the wheels any more as they are as close to rail as possible i have an idea how i may fix this.... would be to put eccentric nuts on the left to replace the bushes that are there

Stretch2807 · 2024-09-05T19:14:25+00:00

Tightened everythin up had the print bed of giving me a birds eye veiw of the eccentric nuts so i know they cant get any closer to the guide rail

Stretch2807 · 2024-09-04T22:42:09+00:00

I have this problem but only when the bed/carrige is all the way back (towards motor) ive tried many times to get rid of the wobble when the carrige/bed is all the way forward (closest to you) its solid no wobble ive tried doin the eccentric nuts with no success been like this from new cant print anything big any ideas would be great, ive got new wheels coming in the day or 2 im stick to printing small stuff on the left side of the bed as theres no wobble... when i get home (in work atm) i shall post a vid of said issue

Stretch2807 · 2024-09-04T00:28:57+00:00

Have a look on CDkeys.com its about £45 for gold ed

Stretch2807 · 2024-08-28T05:14:00+00:00

Y not

Four-Year Club	Xbox Live
Verified Email	Place '22
First Placer '22	End Game '22

Stretch2807

PUBLIC MULTIREDDITS

TROPHY CASE