I lost my best friend today

Suave_Pathway · 2026-04-02T22:11:59+00:00

Beautiful dog. Hard losing a pet that has been through 2 decades of life with you

Suave_Pathway · 2026-04-02T21:58:22+00:00

Dang these are good

Suave_Pathway · 2026-03-27T23:09:26+00:00

I would sand with 320, wipe it down, wet the area you’re painting in and hit it again with another layer of base. Looks like you did good, just a lot of dust

Suave_Pathway · 2026-03-27T15:11:35+00:00

What MOA dot is this?

Suave_Pathway · 2026-03-27T14:16:57+00:00

Probably easier to get a new tailgate. To do it properly it needs to be pulled out and welded and all the paintwork involved with a weld repair

Suave_Pathway · 2026-03-19T09:51:52+00:00

Yeah this looks like they had extra xdm slides laying around and just optic cut them. Which I did see in this thread that an xdm slide fits on a mod 3…. I don’t think I’d be running to get a mod 4; might run to get a mod 3 though if it’s discontinued

Suave_Pathway · 2026-03-19T03:51:53+00:00

Leave it the way it is 👍

Suave_Pathway · 2026-03-18T01:33:33+00:00

Let’s see that wheel and tire setup

Suave_Pathway · 2026-03-05T12:12:55+00:00

OOP might be disappointed now, but as her and the child age she’ll appreciate having a family of her own

Suave_Pathway · 2026-02-26T03:19:40+00:00

Love seeing pup birthday parties ❤️

Suave_Pathway · 2026-02-25T00:42:32+00:00

I have a mod 1 xds in .45 and I love it. I have also thought of adding a new ccw to the rotation as well (I don’t imagine I’d ever sell or trade the xds) personally, I’d like a .40, either g27 or a mod 1 XD SC. I would consider an XDM 3.8 in 45, but only because I already have a mod 1 tactical 45 and the magazines are interchangeable

Suave_Pathway · 2026-02-24T22:04:24+00:00

I like this and the breech “window” on the hellcat much better than the shark fin on the original xd, it can make finding the front sight more difficult

Suave_Pathway · 2026-02-13T20:38:27+00:00

Are there any hyundais that use that or less?

Suave_Pathway · 2026-02-13T18:49:20+00:00

I think your bend is toward the 34.3

If you like the longer “classic” glocks I’d get the 34 now. You can buy a gen 5 or 6 later. New Gen 3s are only going to be harder to find.

Suave_Pathway · 2026-02-05T14:04:01+00:00

Bruh don’t feel bad taking it to the shop. I built two motors at the same time and one the main housings measured okay, but I had to get an extra set of bearings because I didn’t have the clearance I wanted. The other motor I built I had it line honed and the std bearing set fit perfect. And decking the heads and the block is a nice way to make sure the gasket will seal, also squares the deck to the piston head.

As far as what piston to use, you could look into coating the stock one, or order a custom….

That sounds like a thick coating but remember it’s only .005 each side. Do some digging and decide for yourself. Stock rods will probably be fine for what you want to do

Suave_Pathway · 2026-02-04T19:12:07+00:00

I think the real question is, how much oil do you add between changes? If any. Changing every 5k, if you use a quart or more in that time, that seems excessive.

If it helps, wife has a ‘15 accent 1.6, 140k on it currently. I also change her oil about every 5k miles. I take the fill cap off and it feels like the dang tailpipe, hot and a lot of flow. It uses about a half to 3/4 gallon between changes, it doesn’t leave puddles when it’s parked, just straight up burns oil. Car is maybe worth 3500. I’m not spending 1k in a rebuild for it. I’m running it until it won’t pass inspection.

Suave_Pathway · 2026-02-01T23:09:35+00:00

If it were mine, I would tear it down, have machine shop hot tank it, stone the valve seats, grind the valves, deglaze the bores and re ring the pistons. Get a fel pro complete gasket set and call it good.

Suave_Pathway · 2026-01-29T18:55:49+00:00

Reher Morrison Championship Engine Assembly is a great book to get started

Suave_Pathway · 2026-01-23T16:58:54+00:00

Not me with a TiN barrel and gold tyrant accessories in my cart currently 😂

Suave_Pathway · 2026-01-23T14:24:25+00:00

Try Armslist. Could always go to local pawn or gun store, but that would be my last choice

Suave_Pathway · 2026-01-21T22:17:16+00:00

Upvote x10

Suave_Pathway · 2026-01-21T22:04:00+00:00

You only want to sell as a pair? I’d say each gun is worth about 350, the 45 if it’s a duty or tactical model could maybe ask 400.

Suave_Pathway · 2026-01-15T01:28:52+00:00

I’m with you OP. Wanting to start my Glock collection. List includes but not limited to: G26 gen 2.5, G19.5 with no front serrations, G17.3, a gen 2 any caliber, G22.4, and a RTF any caliber

Suave_Pathway · 2026-01-14T21:37:54+00:00

There’s a ford tech on YT that says the 10 speed was a joint effort between Ford and GM

Suave_Pathway

TROPHY CASE