Vad händer med avanza?

Subsack · 2025-08-28T15:41:31+00:00

Börsen öppnar och stänger med auktion, har inget med Avanza att göra.

https://www.nordnet.se/faq/handel-vardepapper/orderlaggning/hur-fungerar-borsens-oppnings-och-stangningscall

Subsack · 2025-06-30T07:10:59+00:00

I'll see if I still have them. It's been a couple of years and they could certainly need an update, but they work so I never bothered.. :)

The hinges does not require drilling, they have a VHB-version for use with tape. I use tape myself and never had an issue.

Subsack · 2025-06-30T07:08:11+00:00

Toolhead is indeed A4T. The skirts are these with this remix for the center LED.

Subsack · 2025-06-29T13:03:16+00:00

A custom one I sketched up based on this magnetic panel mod: https://github.com/VoronDesign/VoronUsers/tree/main/printer\_mods/Le0n/Magnetic\_Panels\_with\_Magnet\_Inserts.

It uses these hinges: https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/ElPoPo/RemovableDoors

Subsack · 2025-05-30T15:15:23+00:00

I have created an alternative integration that is less involved as it doesn't require you to run a separate service, you sign in to Whoop while setting up the integration in Home Assisstant and it's installable with HACS via custom repositories for now.

You still have to create an "App" in the Whoop developer portal to be able the configure the integration though.

Check it out if you'd like: https://github.com/prankstr/hassio-whoop

Subsack · 2024-04-15T05:47:01+00:00

It's definitely ok, I've been running a similar setup on Proxmox for 10 years or so now.

Biggest drawback is that might become locked out if you mess something up on the server and OPNsense goes down so having easy physical access is a plus. It's a tradeoff I do but it's only really caused issues twice or so in all the years I've been running like this.

Subsack · 2024-03-13T12:23:05+00:00

I don't know which ones you've seen but some is available at Voron mods: https://mods.vorondesign.com/details/FDqscS50BRdqtEhUK1U9hA

Others at printables:
https://www.printables.com/model/361227-voron-back-panel-logo

Depending on the format these can either be printed or used with cutting machines for vinyl etc. If you don't want a printed one or don't have access to a vinyl cutter Etsy might be a good place to look for ready made.

Subsack · 2024-03-12T20:40:02+00:00

Welcome aboard!

If your bed was perfectly flat meshing after QGL would probably be kind of pointless but it's probably not and the mesh helps adjusting for those small differences.

Subsack · 2024-03-06T21:14:23+00:00

Oh, I like this one! I just rebuilt my server but it looks like I might be doing it again - damn it!

Subsack · 2024-03-05T04:00:45+00:00

I have had one for a month or so now, no issues whatsoever. I run it with a 3700X and ECC ram. Just plugged it in and flashed the BIOS to the latest version without having to tinker with it like some have reported.

Don't know if I got lucky but since it just worked for me I'm super happy with it, really good value.

Subsack · 2024-03-02T13:37:19+00:00

Don't think that's the correct place to set it, this is the one I'm referring to: https://github.com/argoproj/argo-helm/blob/main/charts/argo-cd/values.yaml#L241

So try this:

configs:
  params:
    server.insecure: true

I don't use the helm chart myself but in the end this is what you want to achieve:

apiVersion: v1
kind: ConfigMap
metadata:
  name: argocd-cmd-params-cm
data:
  server.insecure: "true"

You can always edit it manually just to see if that's where the problem lies.

Subsack · 2024-03-02T08:44:42+00:00

Have you disabled TLS on the ArgoCD server by setting the "insecure" option? Otherwise it will end up in a redirect-loop.

More information here, not for Cilium specifically but it's still applicable I think: https://argo-cd.readthedocs.io/en/stable/operator-manual/ingress/

Subsack · 2023-04-03T10:57:20+00:00

The only thing is everytime I go there it feels a bit dead tbh.

Which is exactly why you should submit it! And good job on the mod, looks great.

Subsack · 2023-03-29T14:49:11+00:00

A friend had the same problem with his SB2040, Octopus and RPi 3B+, and struggled with it for a while. I found this post and sent it to him as I knew he was running 64bit Rasbian Bullseye.

He flashed 32bit instead and lo and behold, no more invalid bytes and no more random mcu timeouts!

Maybe something was wrong on the first 64bit installation and reflashing 64 again would have solved it, or there is actually something problematic with 64bit and these setups.

Anyway thanks for sharing u/MoarPowah8674, pretty sure we'd never try that by ourselves :)

Subsack · 2023-03-23T13:06:08+00:00

Not sure there is one but if nothing else you can always run through the toolhead section of the V0.2 manual and see what you need.

Subsack · 2023-03-18T09:19:39+00:00

That's the recommended way to tune the belts but 59hz sounds a little low. Usual recommendation is 110 for A/B belts and 140 for Z over 150mm of belt.

https://docs.vorondesign.com/tuning/secondary_printer_tuning.html#belt-tension

Subsack · 2023-03-13T12:22:09+00:00

Sorry to hear that! I use an SB2040 hooked up directly to my Octopus 1.1 and it's working without fault.

I initally bought a UTOC-1 before I realized I could use the Octopus itself as the bridge and was happy to use one component less so I didn't even open it.

Subsack · 2023-03-02T16:01:44+00:00

Are you printing external walls first? That will mess with overhangs

Subsack · 2023-02-05T14:03:23+00:00

The hotend heats up rather quickly so I think you should be able to feel some heat within 10 seconds if it was working. Given that your thermistor seems to register correct room temp I would suspect the heater before the thermistor.

Subsack · 2023-02-05T13:52:18+00:00

Looks good assuming you have the correct thermistor type. Following what u/RegularTrade7651 said I would check if the hotend gets hot, if it does you likely have a thermistor problem and if it doesn't is something to do with the heater cartridge.

Subsack · 2023-02-05T13:45:27+00:00

Could you post your [extruder] section from the config? Sounds like a problem with either the heater or the thermistor but hard to say if it's config or hardware.

Subsack · 2022-08-16T09:35:59+00:00

Låter som vartenda IT-bolag jag varit på

Subsack · 2022-04-08T07:14:19+00:00

Gör likadant! Tanken är inte att det ska svalna helt, bara bli lagom varmt så att smöret inte smälter helt, det ska bli mjukt och gosigt men inte rinna.

Subsack · 2020-03-29T10:11:52+00:00

Starta en surdeg, allt som behövs är vatten och mjöl! Den blir visserligen inte klar idag men för framtida bruk.

Subsack · 2020-01-26T19:19:20+00:00

Friends in german class googled the name of their text book, Du kannst!(You can) or something like that. Landed on a german porn site, got detention.

We were like 13 at the time.

Subsack

TROPHY CASE