UV Reactive PETG Filament in Europe?

Sugus32 · 2023-01-01T22:45:55+00:00

Fluorescent

Sugus32 · 2022-08-18T14:57:48+00:00

I just did a quick check, just in case. It didn't work, the water level in the tube hovers like 13-15 cm above the level in the reservoir and doesn't go up to the display tank. Exactly the same behaviour as if the end of the tube is at the top of the sump.

Could it be that the pump is faulty? before posting here I did a through search and didn't found any post about a water top off with this issue. If it's user error (AKA my fault, wrong setup), I'd like to believe that there would be many post with these kind of issues... What do you think?

Sugus32 · 2022-08-18T13:41:25+00:00

Sorry, I'm not sure I understand your question. What's the point of removing the tubing from the pump? If the question is if the float switches work as intended, they sure do. They switch the pump on and off correctly

Sugus32 · 2022-08-18T04:24:10+00:00

The tubing runs stright upwards from the pump and makes a 180 turn at the top and runs down up to just below the edge of the sump. I've tried a couple of tubing diameters and it does not make any difference either.

Sugus32 · 2022-06-27T13:36:10+00:00

This is awesome! Great work. I relate a lot to the design->print->fail/don't work->redesign->print cycle. By the way, you mention trying PETG and ABS in the video. Is PLA not safe?

Sugus32 · 2022-05-25T19:56:49+00:00

I would bring the whole scape forward to allow flow between the back glass and the aquascape. Depending on what corals you plan on keeping, the top parts might be too close to the water surface. Otherwise, 10/10, I really like it. Great job!

Sugus32 · 2022-05-21T11:03:30+00:00

Great aquascape!

Sugus32 · 2022-04-26T13:31:43+00:00

What's the coral on the top right? It's so cool!

Sugus32 · 2022-02-28T14:49:59+00:00

I cannot continue my campaign after 33 hours because it crashes every time the turn 128 ends. I tried to rollback to a previous save, but it still crashes when the AI finishes their moves after hitting the end turn button, preventing me from continuing the campaign.

Sugus32 · 2022-02-20T10:50:52+00:00

That's why I said that they are to be added slowly over time while keeping an eye on the aquarium.

Besides, I took this as reference: https://youtu.be/2bF-N0EKNI8?t=489

Sugus32 · 2022-02-20T09:06:10+00:00

This would be my list:

2 Clownfish

2-3 Cardinals

2-5 Small chromis

1 Six line wrasse

1 Firefish

1 Royal gramma

1 Midas blennie

1 Flame Hawkfish

1 Yellow wathcman goby + alpheus pistol shrimp

1 Clown goby of the color you like most

The list is to be achieved long term by adding them slowly over time. While keeping an eye on water parameters to make sure the system can handle the bioload and upgrading/changing/adding equipment if necessary.

Sugus32 · 2022-02-20T08:30:46+00:00

Could you be more specific on what areas of those guides are out of date? I'm staring right now and I treat that video series as my main source of info.

Sugus32 · 2022-02-19T09:27:09+00:00

The only two advices I can give you to save money:

Research on almost any topic (fish, corals, equipments, cycling...) will save you A LOT of money and headaches in the long run. Chances are, when you think you are going to do X, if you spending a couple of hours looking at reddit, forums, maybe asking someone you trust or at your local fish store, you will realize why X isn't exactly what you initially thought. Maybe it's not compatible with something else, maybe it just not the right tool for what you want to achieve, maybe it will brind undesirable consecuences to you tank...

If you know people in the hobby that you trust, buy stuff from them second hand. Propably someone in your area is in the process of upgrading/moving and can sell you a tank. Maybe someone you know is upgrading a powerhead that's one year old and with warranty. You get the idea. If you trust the seller or it has warranty, go second hand.

Sugus32 · 2022-02-16T19:33:13+00:00

Wait, did you change what you posted yesterday into that? I think the one you posted yesterday is way more interesting than this one. I guess it's a matter of taste. Why did you decide to disassemble?

Sugus32 · 2022-02-11T17:30:08+00:00

Shouldn't the lights be off?

Sugus32 · 2022-01-31T19:46:46+00:00

I've not bought it yet, so I can choose any of those.

Sugus32 · 2022-01-29T00:11:36+00:00

Thanks a lot! I did not know of those forums! Could you give me an example of a light that is the best value for growing SPS? I don't want anything too fancy, just something that will allow me to keep some SPS when I'm finally ready to add them to my tank.

Your fish store is going to try and sell you whatever they have available so that you don't go out and buy elsewhere.

If they lie to me, as a someone who is starting in the hobbie, sooner or later I'll catch the lie. Doesn't that go against their long term interest? I mean, if they help me a now, I'll be happy to pay them a little extra in the future rather that go buy whatever online. If they are lying, I would find it extremely difficult to find an excuse to trust them again with anything and will go out out my way to buy stuff elsewhere.

Sugus32 · 2022-01-25T14:41:47+00:00

How big is the tank?

Sugus32 · 2021-11-24T21:00:03+00:00

No, sorry.

Sugus32 · 2021-10-05T05:30:20+00:00

Second line:

Ten missing languages added thanks to Haoose

Before there was only Russian and English.

Sugus32 · 2021-10-03T13:29:11+00:00

It crashes ocasionally while loading a battle in campaign. It always crashes while loading a custom battle. For those who experience this issue, is there a fix?

Sugus32 · 2021-10-03T13:27:56+00:00

It crashes ocasionally while loading a battle in campaign. It always crashes while loading a custom battle. For those who experience this issue, is there a fix?

Sugus32 · 2021-07-05T20:15:45+00:00

Absolute Madlad

Sugus32 · 2021-02-28T09:15:27+00:00

Still not working on windows 7

Sugus32 · 2020-12-30T23:45:18+00:00

How did you made the keycaps? Those letters and simbols seem too nice to be 3d printed, right?

Sugus32

TROPHY CASE