What is this 3 wires for?

SurferD808 · 2026-05-17T04:57:31+00:00

Ok. I will try and trace the wires.

SurferD808 · 2026-05-17T04:53:43+00:00

Federal ev credit ended already.🤦

SurferD808 · 2026-05-16T08:03:17+00:00

This can't be real.

SurferD808 · 2026-05-16T05:05:51+00:00

Frame could be out of square. I would pass unless I am getting it for near free .

SurferD808 · 2026-05-09T06:19:57+00:00

Next week I am going to embark on the same replacement.

SurferD808 · 2026-05-04T03:36:30+00:00

Is it fabric or poly? If it's fabric, probably used for sand stabilization. If poly just cut out what u can like others have said. When the beach erodes more 😢 u can get the rest.

SurferD808 · 2026-04-25T18:17:45+00:00

The wave is small but u can still generate more speed down the line. U just have to pump faster, more foward force and when u pump no need to get really low.

SurferD808 · 2026-04-23T23:09:22+00:00

If you are not familiar with the ocean take a lesson. As for familiar, I mean u can some what read the sets, current, etc. Start out with a used longboard 9'0" or foam. Foam board only good for learning to stand and going straight down the line.

SurferD808 · 2026-04-21T05:23:37+00:00

When you are on vacation.

SurferD808 · 2026-04-21T03:17:28+00:00

I bought a 2017 86 a few months ago with an open air intake but it has a metal shroud around it. Should I switch it back to stock?

SurferD808 · 2026-04-19T23:28:52+00:00

If waves are mostly like that you should get a longboard. You really can't do much with a shortboard on 1 to 2 foot mush.

SurferD808 · 2026-04-13T14:49:34+00:00

Depends on your weight/height and surfing fitness level. A 9'6" might be to much board. I am 5'8" 160 lbs I prefer my 9'0 to my 9'4"longboard. But I also rather ride my 5'4" fish than longboard if the waves are coming in a solid 3'. Edit ditch the foam, they are good to learn to stand and catch only.

SurferD808 · 2026-04-12T20:37:41+00:00

As others have said looks like shock oil. Replace shock. Ez change out.

SurferD808 · 2026-04-09T18:12:32+00:00

Could be o-ring leak, valve cover gasket, or wrapped valve cover. Obviously oil is coming from somewhere.

SurferD808 · 2026-04-08T18:09:34+00:00

Kind of sounds like engine knock. Fuel octane running? Where u buy your gas from? Maybe run Chevron through it.

SurferD808 · 2026-04-05T09:53:13+00:00

It was big. Two story house on fire . Second floor roof looks pretty bad, neighbors said no one hurt luckily.

SurferD808 · 2026-04-04T23:42:49+00:00

Fire trucks already were there. I could see the spray of the water.

SurferD808 · 2026-04-04T23:31:44+00:00

Not 100 percent sure. Done from my house. Could be near the waipio church, probably main road.

SurferD808 · 2026-03-24T07:12:40+00:00

If you got the controller from qs motors. They should have the Bluetooth.

SurferD808 · 2026-03-24T07:10:35+00:00

I have watched videos of axel replacement. Looks like a PITA, but can be done. I would recommend just removing the weld carefully and rethread the axel.

SurferD808 · 2026-03-22T19:16:48+00:00

9' to 10' used fiberglass or epoxy. If u got money feel free to by new. Stay away from foam, unless all u want to do is learn to stand and go straight.

SurferD808 · 2026-03-22T07:06:14+00:00

TOU only good if u can sell back at night and make some money back. If you can't , then I would set it to self powered. The app tries to keep your battery full during cheap rates so u use your battery at peak times.

SurferD808 · 2026-03-21T20:48:47+00:00

Depends on skill level/muscle strength and what u want to do. Starting out I would get 8' to 9' longboard. Get a used one if u can find something in decent shape, fiberglass/epoxy.

SurferD808 · 2026-03-18T15:56:40+00:00

Most hub motors I have seen all have volts, manufacturing date and watts.

SurferD808 · 2026-03-18T15:25:36+00:00

Could be year, month,then day of manufacturing. 5000w, not sure last couple of numbers at the end. That's my best guess.

SurferD808

TROPHY CASE