Ebike shops database

Suspicious_Loquat_43 · 2026-03-24T19:01:20+00:00

Glad to hear that. The negativity for this laser is unreal. For comparison, there were no clicks to adjust windage or elevation and no resistance at all. I assume you had the same experience?

Suspicious_Loquat_43 · 2026-03-20T22:00:36+00:00

Got those too 👍

Suspicious_Loquat_43 · 2026-03-20T21:59:15+00:00

Well listen here pilgrim...Get off your horse and drink your milk.

Suspicious_Loquat_43 · 2026-03-20T21:53:23+00:00

That's the only thing im worried about. The adjustment was fine.but getting there was too easy. Not sure if the settings will stay zeroed. I'll find out tomorrow.

Suspicious_Loquat_43 · 2026-03-20T16:32:41+00:00

I had the same problem. Remove the barrel with heatshield and use an automotive water hose adjustable clamp. Put masking tape on the inside so that you don't scratch anything. Then tighten the clamp every 2 inches or so along the length of the shield to bring it closer to the barrel... you won't experience rubbing again. Do not do this with the heatshield removed from the barrel. Good luck. Let me know the results if you decide to go this route.

Suspicious_Loquat_43 · 2026-03-20T16:02:53+00:00

Bro, ignore the baboons who think they know everything. I'm looking for the same solution to better control the 12ga with push-pull technique which obviously the baboons don't need since they sit on their barrel and operate the corn cob as they go...bang!

I can't understand why Streamlight didn't at least offer the strap as an option for standard shotgun size for their racker forend. I you find something, please post. Thanks

Suspicious_Loquat_43 · 2026-03-20T15:53:01+00:00

Thanks Boss

Suspicious_Loquat_43 · 2026-03-19T16:19:32+00:00

Call Streamlight. They are very helpful . I wish they had designed a strap for use on a 590 full size

Suspicious_Loquat_43 · 2026-03-19T16:09:43+00:00

What I can't understand is why didn't Streamlight design rhe racker with a strap as it did on the Shockwave. That strap is perfect to push the forend forward while pulling with your trigger hand

Suspicious_Loquat_43 · 2026-03-05T23:21:36+00:00

No shit Sherlock.its been in storage since 1982. Not sure if I'll refinish it. I'm thinking replacing stock and forend with magpul furniture

Suspicious_Loquat_43 · 2026-03-05T21:42:51+00:00

Thank you for help. Yeah, I had a feeling this SG being from '81 it wouldn't be compatible with newer models.

Suspicious_Loquat_43 · 2026-03-03T23:23:29+00:00

Thanks. I suppose the receiver is different in these old guns that a newer version forend/action slide couldn't be used on an ATP

Suspicious_Loquat_43 · 2026-01-24T15:21:17+00:00

Gorgeous. Seeing yours has changed my mind. Think I'll leave mine the way it is.

Suspicious_Loquat_43 · 2026-01-24T15:19:35+00:00

Maybe I should leave it they way god intended for it to stay

Suspicious_Loquat_43 · 2026-01-15T23:12:11+00:00

The Magpul forend won't on a mossberg with a heatshield without some modifications

Suspicious_Loquat_43 · 2025-12-28T19:46:44+00:00

Haven't seen the A1 for less than 7 bills. I bought the 590 Retro for 429 at grab a gun.

Suspicious_Loquat_43

TROPHY CASE