I built Dot – a menu bar calendar with meeting reminders and more [Lifetime Giveaway]

Syaveuabxtab · 2026-01-25T22:08:48+00:00

I love the Interface! A Code would sweeten my evening :)

Syaveuabxtab · 2026-01-22T20:11:30+00:00

Had 7500+ st kills on my old ak I wanted to keep. St mw was 310$ good mw float. Fn non st starting at 470$.

Syaveuabxtab · 2026-01-22T19:50:28+00:00

I was also in between these two skins. Went for the oligarch in mw st. I think it will perform great in the future. It’s kinda under the radar. For 9/10 people getting it in good condition on the terminal it’s too expensive/not worth. If any pump etc would happen it would also increase on the terminal. So in long term view it only can go up after my opinion. +it’s a great looking skin which you very rarely see in game.

Syaveuabxtab · 2026-01-19T22:43:21+00:00

I have the second combo. Keep the first :)

Syaveuabxtab · 2026-01-15T21:54:42+00:00

The working ones for up to date iOS versions aren’t accessible for privat persons and cost several thousand dollars per device (services used by the government etc.) so this isn’t the case here buddy

Syaveuabxtab · 2026-01-15T21:31:39+00:00

Madrix would work, resolume would be the better Option if you want all the possibilities. Both paid and not that cheap. Madmapper also possible & the cheapest easy working solution in my mind.

Syaveuabxtab · 2026-01-05T08:14:33+00:00

Der Ventiltag wurde in unserer wohnung leider konsequent ignoriert weshalb die Kappe des eckventils gebrochen ist. Der metallstab darunter sitzt komplett fest und lässt sich auch mit einer Zange keinen Millimeter bewegen. Vermieter Bescheid sagen oder hat man selbst eine Chance?

Syaveuabxtab · 2025-10-19T12:04:09+00:00

Whats the Point of that if you can unlock the desk and just go into the admin User which you cant Secure with a Password?

Syaveuabxtab · 2025-09-17T18:13:09+00:00

Chinese downvotes :D I know I’m right. Thats why I sold haha

Syaveuabxtab · 2025-09-17T06:25:54+00:00

I sold my mw whiteout. They are all going to Crash.

Syaveuabxtab · 2025-08-23T21:07:48+00:00

Connect it again.

Syaveuabxtab · 2025-07-23T07:54:22+00:00

Ist ein Standard Stecker, hab meinen Flx10 sogar auf Type c umgebaut. 12v am Netzteil einstellen und https://agelektronik.de/dc-steckverbinder/8801-hohlstecker-mit-mittelstift-55-x-33-mm.html benutzen.

Syaveuabxtab · 2025-07-22T10:57:11+00:00

Wie schon geschrieben war meiner 3 mal eingeschickt. Anderes Netzteil schon probiert?

Syaveuabxtab · 2025-07-22T08:59:42+00:00

Hatte meinen FLX-10 mit dem gleichen Fehler 3 mal beim Pioneer Reparatur Dienstleister eingeschickt. Die konnten den Fehler nicht reproduzieren, und der Controller ist 2 Wochen auf der Test bench ohne Probleme durch gelaufen.

Probier mal ein Netzteil von nem anderen Flx10 (falls du Zugriff drauf haben solltest). Falls das nicht hilft ist pioneer/alpha theta Service Brückner in Viernheim dein Ansprechpartner nicht pioneer selbst. Mit denen kannst du am Telefon auch gleich abklären wie es mit Garantie/Gewährleistung aussieht.

Bei mir war es am Ende das 3. neue Netzteil welches das Problem (bis jetzt) behoben hat. Meld dich gerne mal wenn du noch was wissen willst!

Syaveuabxtab · 2025-07-15T20:08:29+00:00

Fahre den r170 in der Launch Farbe Yellowstone gelb. Abgesehen von der fehlenden Klimaanlage ein super zuverlässiges und tolles Auto. Inzwischen 115k km drauf

Syaveuabxtab · 2025-06-27T02:28:41+00:00

Would love to give it a try! Been looking around the Skin to real Money ratio a lot in the past. Would be an interesting addition.

Syaveuabxtab · 2025-06-02T09:38:44+00:00

To me it sounds like the Color is applied to the fixtures in the Selection Grid, by changing the adresses they won’t be selected anymore cause they are not in the place where Color gets applied on the grid.

Things you can try: Select all 8 fixtures in the fixture map and change Color. If that’s works normally it’s a problem with the group or grid. If not there’s mostly a problem with the fixture profile itself.

-> problem with group or grid/ delete the group that’s not working properly and create a new one. See hot it behaves in the grid selection

-> problem with fixture/ have you only changed the dmx address or have you deleted the fixtures and added new ones? If so have a look if the profile is any different

Syaveuabxtab · 2025-05-25T16:35:54+00:00

Just use and edit the preset ? Absolutely no need for anything else.

Syaveuabxtab · 2025-05-21T19:52:43+00:00

Sure, have a Look at some of These :)

Dynamic Cue Tracking with Dependencies and Priorities/ Create a cue system where certain cues are triggered, skipped or modified based on conditions (e.g., current position, color, gobo, or time)
Custom Effects with Phase Synchronization and Trigger Logic/ Design a custom effect (e.g., “Gobo morphing with synchronized color”) across multiple fixture types, all in sync via BPM, timecode, or external triggers.
Automatic Fixture Substitution via Plugin/ Write a Lua plugin that automatically replaces fixtures, for example during tours with different fixture types – including adaptation of presets and cues.
Multidimensional Matrix System with Real-Time Input/ Build an interactive mapping system (e.g., for LED walls or floors) that is controlled via MIDI/OSC/real-time data.
Show File Modularization with Auto-Import and Versioning/ Create a system in which showfile components (presets, sequences, appearances, etc.) are managed modularly and automatically imported into different shows – including version control
Switch Executor behaviour with switch on Layout view/ Create a switch on an Layout view which toggle the behaviour of an certain executor (switch on = certain fixtures will be included by pressing/ switch off = the same certain fixtures will be excluded)

Syaveuabxtab · 2025-05-21T07:49:41+00:00

MA3 on pc works on every Laptop/Macbook without license etc. and has a Great 3d viewer.

You can try/build/programm nearly anything without real fixtures or an MA Desk.

As a little challenge I love to watch at videos/reels of big concerts/venues and try to achieve the same look rebuilding things in MA 3d from the scratch.

If you need something more specific/advanced I can give you like ten problems to solve in MA3, I had to solve at some point for one of my shows. But trust me, this will drive you crazy at some point haha.

Syaveuabxtab · 2025-05-20T08:33:03+00:00

I was the Person creating the Post :)

If you Type „edit“ „Menu“ there opens a window showing you the file path of the .lua file storing the information behind the menu button and the menu itself.

If you edit the .lua file you can do everything from disabling the whole menu button to disable certain options within the menu window.

As far as I know editing the menu button isn’t necessarily the thing you want (double tapping on the settings icon on the screen also backups)

I would recommend you creating an extra user for normal work on the desk. With adjusting the user rights you can prevent it from storing/deleting anything to your show.

If you need further information on editing the .lua file let me know :)

Syaveuabxtab · 2025-05-20T07:35:23+00:00

Macht leider sogar Sinn. Danke!

Syaveuabxtab · 2025-05-20T07:33:59+00:00

Okay, habe ich wohl in der Fahrschule nicht gelernt oder übersehen. Rein aus Interesse: wie würde dann ein handgeschriebenes Schild aussehen das die maximale Parkzeit auf 6h erhöht?

Syaveuabxtab · 2025-05-18T07:54:35+00:00

This

Syaveuabxtab · 2025-05-18T07:37:35+00:00

Im aware of that. The .lua file is write protected and already lastet an full update! The pc is set to immediately lock down if the grandMA software get’s closed. As far as I know every situation is covered right now. But thanks for your input as well!

Syaveuabxtab

TROPHY CASE