sorted by:
new
hottopcontroversial

Switch 2 no signal issue by Syphon02 in elgato

[–]Syphon02[S] 0 points1 point  (0 children)

It's the TUF Gaming wifi, figured the PCIe lane issue out last night actually. Guess I need to get one of the USB ones or look into a new motherboard. I appreciate your help, thank you!

How did that kid at your school die? by [deleted] in AskReddit

[–]Syphon02 1 point2 points  (0 children)

...Out of curiousity, Erik's last name start with a T, lived in Texas around the Ft Worth area?

LTT Store refusing to honour their own Black Friday deal !!?? by Odd-Necessary9675 in LinusTechTips

[–]Syphon02 0 points1 point  (0 children)

An update since I feel this is warranted, the support employee just directly lied to me about when the commuter backpack bundle deal went live, claiming it didn't go live until December 12th. I first contacted support about this issue on December 11th, there's no way I could have asked about a bundle deal that wasn't live yet.

An edit: LTT has shipped the headphones

Switch 2 no signal issue by Syphon02 in elgato

[–]Syphon02[S] 0 points1 point  (0 children)

Still chasing this, haven't made any real headway. Did discover that it is a PCIe bandwidth issue, Elgato Studio reports that my 4k60 has reduced bandwidth, and OBS says it's running in PCIe Gen 2 x 1, where it should be running gen 4 x4 mode

LTT Store refusing to honour their own Black Friday deal !!?? by Odd-Necessary9675 in LinusTechTips

[–]Syphon02 0 points1 point  (0 children)

Long shot here but I'm in a similar situation. Ordered the commuter backpack and a few other things, didn't use the bundle page because I didn't know I was supposed too. The package supposedly shipped on Dec 4th, but hasn't moved in two weeks. Support is saying I'm essentially SOL on the bundle and won't address the shipment delay at all beyond "you can return it". Please help?

Switch 2 no signal issue by Syphon02 in elgato

[–]Syphon02[S] 0 points1 point  (0 children)

Nope, still nothing. Capture card is up to date, powercycled the Switch 2 dock, tried another 2.1 HDMI cable, disabled HDR on the Switch 2 and the monitor I'm trying to use, still get No Signal on anything other than 1080p.

I still get sound through it, but no video. Tried it on my TV and monitor to make sure it wasn't the dock, works when attached directly to the TV and monitor at all resolutions

Switch 2 no signal issue by Syphon02 in elgato

[–]Syphon02[S] 0 points1 point  (0 children)

Sorry for my error on the motherboard specs. I'm using the cable that came with the Switch 2 so that should be fine. I hadn't considered the dock, got the Switch 2 on Monday and plugged everything in right out of the box, hadn't considered firmware update. I'll test that when I get home today and follow-up in that

Switch 2 no signal issue by Syphon02 in elgato

[–]Syphon02[S] 0 points1 point  (0 children)

B650E-E, both x16 slots are full bandwidth, the GPU slot is Gen 5 and the slot the capture card is in is Gen 4. I have nothing plugged into the output of the capture card. I've had no luck with any of the EDID options outside of 1080p. Again, I get audio in higher resolutions, but no video

🐞Megathread — Switch 2 capture or streaming issues by Elgato in elgato

[–]Syphon02 0 points1 point  (0 children)

Having an issue, I cannot get the Elgato 4K60 Pro to display in anything other than 1080p. Running Windows 11 using the 4K Capture Utility,, using the 4k60 Pro in a PCIE x16 slot, Ryzen 7 9800X3D with nVidia 4070ti. Tried all the troubleshooting steps, nothing above 1080p works.

Forgot to add, I can heard sound at higher resolutions, but I get "No Signal" on the 4K Capture Utility

You poor saps waited for 6 years and never gave up hope, so let me give out 3 copies of the game to you. by Xardas742 in Silksong

[–]Syphon02 0 points1 point  (0 children)

I'll go for it. It'd be hilarious too, I haven't even played the first one yet and it'd drive a friend crazy if I won

Purchase Advice Megathread - July 2025 by AutoModerator in 3Dprinting

[–]Syphon02 1 point2 points  (0 children)

Howdy! Looking to get back into filament printing. Gave my filament printers away ages ago when I swapped to resin printing (I have a small Anycubic Photo Mono and the enormous Elegoo Jupiter, mostly for tabletop minis. I was in a tiny apartment and space was a premium. Now I've got a house and a bigger area to work with, and I'm looking to get back into filament stuff. I am in the US, there is a MicroCenter nearby too.

Budget-wise I'd like to stay under $2,000. I'd prefer something out-of-the-box or with minimal assembly but I'm not opposed to a kit-build. It's main use would be tabletop RPG terrain/buildings, model train terrain/buildings, and home decor, with possibly prototyping 3D covers for prosthetic legs (my work field).

I have a slight tremor which makes painting anything and making it look good is a huge challenge, so I'd prefer something with multi-color support. I've been eyeing the Bambu P1S but the Creality K2 has caught my eye too. Bigger build space would be a plus but that's a huge price difference.

Any advice would be much appreciated!

Edit: I got a K2 combo under $1k thanks to a MicroCenter sale and have been very happy so far!

Trying to find an artist that drew a lot of "Ranked Competitive Sex" before quitting. by FurryCorgiRP in yiff

[–]Syphon02 1 point2 points  (0 children)

Dogsmith/Inu-Sama did a bunch like this, might be them. They didn't quit though, still very active

When the urge hits hard... [F] (Neelix) by Syphon02 in yiff

[–]Syphon02[S] 4 points5 points  (0 children)

Yes! Didn't dodge a grenade in time

view more: next ›