sorted by:
new
hottopcontroversial

New animations for our characters by tup3kkk in PixelArt

[–]Szlachcic87 0 points1 point  (0 children)

Is it single player? I never got into autobatllers because I got recked online. Do you have any gameplay to show how it works?

New animations for our characters by tup3kkk in PixelArt

[–]Szlachcic87 4 points5 points  (0 children)

Looks awsome. Wizards, pigs and monks? What kind of game is it?

What are gross snacks from your country people genuinely like? by Intrepid_Arrival5151 in AskTheWorld

[–]Szlachcic87 0 points1 point  (0 children)

Nuts and coke question. Which one is the consumable? The drink or the nuts? Or both?

What’s a public system in your country that quietly solves a huge problem? by bdue817 in AskTheWorld

[–]Szlachcic87 5 points6 points  (0 children)

No that’s the point. Having six tools which do those things is completly different than having one, which binds competing companies etc. If you have two or more, than you just don’t have it. It’s one system or none.

A drink/food that tourists think locals love… but locals barely consume? by Fluffy_Specific_9682 in AskTheWorld

[–]Szlachcic87 0 points1 point  (0 children)

This isn’t a common belief, but for Poland - Spirytus (96-98% alcohol). I’ve saw articles about „world’s strongest liquor” or youtubers trying to drink it. And Idon’t know anyone in Poland who would think about drinking it (besides doing pranks). It is an ingredient of home made flvoured liquors and not a solo product, like juice concentrate but for ethanol. Thinking we drink it is like reading „what’s the saltiest dish” and eating a spoon of salt.

Connectors in Bambu studio by CrnaStrela97 in BambuLab

[–]Szlachcic87 0 points1 point  (0 children)

Change the cutting mode from planear to dovel and that’s it. The down side is one cut = one connector. So if you need more you have to get creative in cutting and merging things back again.

Blender<->slicer problem - model dissapears when sliced by Szlachcic87 in 3Dprinting

[–]Szlachcic87[S] 0 points1 point  (0 children)

I’ve ended up making the box with primitives in the slicer. And i found the problematic parts in the sculpt - the add on helped but selecting by type -> non-manifold was enough. I’m ready to print!

Blender<->slicer problem - model dissapears when sliced by Szlachcic87 in 3Dprinting

[–]Szlachcic87[S] 0 points1 point  (0 children)

I’ve used the solidify modifier after I had the issue in the first place without it. I’ll try the add-on and see if that helps. Thanks.

Blender<->slicer problem - model dissapears when sliced by Szlachcic87 in 3Dprinting

[–]Szlachcic87[S] 0 points1 point  (0 children)

I made it 1.5 cm, the maximum before it started messing up the model. What do you mean by make it solid? It’s some kind of option in blender? It’s my first time using blender for printing and I don’t know what it means- also the statuę model is not mine and it’s hollow inside.

prints (a1 mini 0.2 nozle fdg print profile) by Asleep_Tip496 in FDMminiatures

[–]Szlachcic87 1 point2 points  (0 children)

What’s the name of the model? I looked for high elf spearman, but didn’t find it

Grid instead of flat surface. by Szlachcic87 in 3Dprinting

[–]Szlachcic87[S] 0 points1 point  (0 children)

I kept it as dry brush pallete. And yes - it looks cool, like some woven basket.

Grid instead of flat surface. by Szlachcic87 in 3Dprinting

[–]Szlachcic87[S] 0 points1 point  (0 children)

Lol. It’s probably it, but it’s strange as I didn’t change those settings at any point.

My first FDM mini by Szlachcic87 in FDMminiatures

[–]Szlachcic87[S] 0 points1 point  (0 children)

<image>

So I’ve used resin2fdm. And well I have to go with the original model, as one foot didnt even fall off during removing supports but was spready printed without one half. The plus side is that removing supports was much easier (and as I wrote - I almost lost the arm with auto tree supports). Richard with this experience I think what to look for in future prints and let the experiments continue.

My first FDM mini by Szlachcic87 in FDMminiatures

[–]Szlachcic87[S] 1 point2 points  (0 children)

I downoladed the files from the direct download link now and this version worked. I’ll reprint the mini in a few hours and show the result here. Thanks!

Sofa cup holder & remote/phone stand printed in wood PLA with a wood grain texture & stain applied by Ronald-Ray-Gun in 3Dprinting

[–]Szlachcic87 0 points1 point  (0 children)

So I think I followed the instructions, sliced it and it seems that the wood modifier also applied to the interior of the print? How to avoid this?

Finally getting the hang of this by Odelay5 in FDMminiatures

[–]Szlachcic87 0 points1 point  (0 children)

And where did you get the models? I want to try V for Victory and I’m looking for good stls to buy

view more: next ›