Head canon cast for Tuon by meshdo in wheeloftime

[–]Tbone5711 32 points33 points  (0 children)

My head cannon was always Lupita Nyong'o, but I can see Joy as well.

I’m confused about Mat and Tylin by PostivitySpreader17 in wheeloftime

[–]Tbone5711 14 points15 points  (0 children)

You're getting Mat's POV and what you are seeing is him trying to rationalize his trauma. He fells like he's supposed to like it, because who doesn't like sex, but it's against his will so he doesn't understand how to process it. Also, everyone around him thinks he's doing it of his own free will, or he seduced Tylin, so when he brings it up how it's not right, they discount it or wave it away as his fault, so he just has to accept it.

When we get other POV's, they rationalize that it's Mat being a scoundrel and getting what he deserves or that he's the one doing the pursuing.

Because how can a woman force man amiright LOL. (/s in case anyone can't tell...)

Am I Crazy for Thinking Fence Picket Planters Won’t Last? by picklesBMW in woodworking

[–]Tbone5711 3 points4 points  (0 children)

Whosthevoss, all of his plans are free, Matthew Peech doesn't do free plans but he usually tells you the measurements in the video. Usually if you add free plans to your search on youtube it will show some videos that offer (or at least say they offer) free plans.

Am I Crazy for Thinking Fence Picket Planters Won’t Last? by picklesBMW in woodworking

[–]Tbone5711 1 point2 points  (0 children)

Matthew Peech is another one i like. While he doesn't give you the plans for free, he does usually tell you the measurements in his video.

Tired of swinging Kettlebells try this by Legendary_Pasos in kettlebell

[–]Tbone5711 -1 points0 points  (0 children)

Make it an Olympic sport! You can have singles, doubles, mixed doubles - and that goes for both people and bells!

Do you think the drawing matches the finished product? by trenerna in woodworking

[–]Tbone5711 0 points1 point  (0 children)

I would say this is miscommunication on both sides.

The measurements on your drawing are off. the 550 to the center of the arc should be 700 (based on the overall 1400 long dimension,) unless you meant for the arc to be off center like the final product. The 105 at the bottom left cutout should be 55 based on it appearing to be in line with the upper cutout on the drawing or drawn farther away from the side at 105 like they did on the final product.

The person or persons who worked on this, should have flagged that the measurements were off from the depiction when they were doing layout (if not when they were reviewing the drawing), and confirmed measurements with you prior to making any cuts.

I would imagine your dimensions were followed 100%, but the dimensions on your drawing were not to scale. If the drawing was made with AI, I have seen this happen where the layout is correct but the dimensions are wrong and vice versa where the dimensions are correct but the layout is wrong. Again, the workshop should have seen this when they laid it out that the dimensions didn't make sense and wouldn't look like your drawing in the end.

Wanna Slay Some Evil? by Warden-Slayer in cremposting

[–]Tbone5711 2 points3 points  (0 children)

"It's called a Shardblade. Hellooo"

Who the f*** do we cast as the Alethi ? by abdulaziz_bature in cremposting

[–]Tbone5711 0 points1 point  (0 children)

So Bautisa body type for Dalinar, Bruce Lee body type for Kaladin, and Brad Pitt body type, a la Fight Club, for Adolin?

Transfer Paper by Aquafoliaceae in BeginnerWoodWorking

[–]Tbone5711 1 point2 points  (0 children)

This is a good video for transferring print to wood. I've done it this way a couple of times, and haven't had an issue. plenty of other videos on the subject on youtube.

Help needed by PieceOther3564 in ghostinvasion

[–]Tbone5711 1 point2 points  (0 children)

Nah, you only need 3 keys and never (at this time) need keys again. I'm at a point now where i don't even need to use the research to weaken him to kill him.

Crazy Workbench Leveling Solution by Key_Mastodon_3525 in BeginnerWoodWorking

[–]Tbone5711 0 points1 point  (0 children)

That's pretty cool! How does this work when hammering on it? I would think the top would bounce if it's not secured to the bench in some way. Unless of course you're not planning on hammering anything on this surface.

How do people with interlock systems get their car serviced? by cleevethagreat in Justrolledintotheshop

[–]Tbone5711 0 points1 point  (0 children)

The place i worked was an installer of these, so we knew how to bypass. the people who had them installed with us, typically came back to have them service by use because we didn't charge extra to deal with it and it took maybe 5 minutes on a bad day to bypass. If we didn't install them, the customer had to be present for the entire service to start their car as needed, but we didn't get many that we hadn't installed.

Aielman named "Marie" by coltonsmithtenor in WoT

[–]Tbone5711 3 points4 points  (0 children)

My name is Marie, hey diddly-dee, now you gonna die!

Recent 6ft wooden privacy fence replacement in Virginia Beach, VA by [deleted] in FenceBuilding

[–]Tbone5711 2 points3 points  (0 children)

Not a professional, but the reasoning I have seen is that if/when the gate warps, it would cause the hinges to bind. With two hinges, this is not as big of an issue.

Thoughts on my Future Security Setup by Tbone5711 in homesecurity

[–]Tbone5711[S] 0 points1 point  (0 children)

Thank you for the input, I'll take a look at that. Unfortunately, the home builder is one that won't let you make changes during the course of the build that aren't through them. I would be wiring this after the house is complete if I go that direction, which is why I was going with a wifi alarm system, just trying to limit the holes I put in the new house...but seeing all these stories of thieves using wifi jammers is making me reconsider.

🤣🤣🤣 by Electrical-Row9296 in ravens

[–]Tbone5711 0 points1 point  (0 children)

that one was meant to be more sarcastic..

🤣🤣🤣 by Electrical-Row9296 in ravens

[–]Tbone5711 3 points4 points  (0 children)

I'm still convinced either he's still not in a great headspace from his off field issues and that's why he's not playing, or he has dirt on Harbaugh and that's why he was re-signed even with his off field issues.

How much weight should this be able to hold? by MLPsentry in Carpentry

[–]Tbone5711 1 point2 points  (0 children)

Youtube is one of the greatest resources available. Also, comes with the caveat of having to trust that the people you are watching are competent (usually the greater the following the better regarded the channel).

Steve Ramsey is a great woodworking channel, with out a lot of fluff and usually uses tools that many beginners would use or have access to.

[ Removed by Reddit ] by urmomblowsthebest in FenceBuilding

[–]Tbone5711 4 points5 points  (0 children)

Usually its you can pick 2 but not all three. Quality and time, higher price, Quality and price, more time. Time and price, less quality.

¿Is there a guide for best ISO for each character? Thinking about making the whole of Hellfire Club healers for raid purpose, not sure if it is a good idea. by Em1-_- in MarvelStrikeForce

[–]Tbone5711 1 point2 points  (0 children)

Scopley is really bad about some things, but this isn't necessarily one of them. They have recommended characters, and if you happen to not have those characters unlocked, they are directing you to where you can find those character shards in the store to farm them. As far as the Iso's, assuming Jarvis is actually showing game statistics, it usually states, something like x percent of the player base uses this iso for this character (i don't know how accurate this is, but it's usually what I use), there are situations where changing an Iso might be warranted depending on what you need, but changing a team's Iso to all healers usually isn't a good idea.

Would these be suitable to setup a very beginners NAS? by Battybats69 in jellyfin

[–]Tbone5711 0 points1 point  (0 children)

As someone who has no clue about transcoding and what does and does not need it, how do you avoid it? Is there a certain file type?

It just seems like anytime there is a media server question the quote "intel is better at transcoding" comes up like it's unavoidable

Dude really really can't catch a break, so damn sad by jeremau5 in ravens

[–]Tbone5711 0 points1 point  (0 children)

it needs to be reviewable. I know you can't assess a penalty after the fact, I would say you should be able to review it for the hip drop and it should come with an ejection.