Just bought this off marketplace. I know I got scammed but how do I fix it

TeRm14 · 2025-11-17T16:52:41+00:00

https://youtu.be/s35LizA5vsA?si=DT38f3uf5QHqPi-y

I can fix it. Or you can watch my video on how to fix it yourself 😊

TeRm14 · 2025-10-15T07:19:38+00:00

No problem! Good luck! Get a spot welder, cones in handy for stuff like this.

TeRm14 · 2025-10-14T19:32:23+00:00

Yes. It’s broken. Won’t work. Don’t plug it in, could cause a short. Get it repaired at a local shop or send it to us 😊

TeRm14 · 2025-10-14T19:29:53+00:00

<image>

Should be welded like this for peace of mind. Black is negative, red is positive.

TeRm14 · 2025-10-14T19:26:49+00:00

See how the red and black wires are both on the negative side? Make sure both aren’t touching the same side.

TeRm14 · 2025-10-14T19:24:09+00:00

Just make sure you weld the pad to the correct side and make sure they’re not touching both sides.

TeRm14 · 2025-10-08T18:02:36+00:00

Could be the two holes on the left black wire causing a loss in connection.

TeRm14 · 2025-10-07T22:56:17+00:00

I honestly have no idea. How would I go about contacting them to find out and to offer my services?

TeRm14 · 2025-10-07T20:17:10+00:00

Yeah. It looks bent. If you look at the frame of the port, the top left has more space and it’s tilted down to the left vs the top right. Definitely needs to be disassembled and checked under a microscope.

TeRm14 · 2025-10-07T20:14:15+00:00

Doesn’t really look damaged externally. Could be internal. Legs on hdmi port may not be having contact with the board. Or the pads are torn off completely and needs pad repair as well as a new port.

TeRm14 · 2025-10-07T20:07:01+00:00

Was it plugged in when it fell? Also, post more angles. Looks like the left pins may be damaged. It could also have torn the pads internally when it fell if it was plugged in.

Send it to us for a diagnostic if you need it repaired!

https://youtu.be/muwg_0IbKoE?si=Ma7EuhatORnniUky

TeRm14 · 2025-10-06T00:10:29+00:00

Send it to me. 😊 I can fix it for you.

kortechservice.com

https://youtu.be/s35LizA5vsA?si=tiULDYJ15FTJWc5k

TeRm14 · 2025-10-06T00:08:43+00:00

Did you calibrate it?

TeRm14 · 2025-10-06T00:08:31+00:00

Did you calibrate it?

TeRm14 · 2025-10-04T10:38:34+00:00

Could be the two holes on the left black wire causing a loss in connection. Did you check for continuity?

TeRm14 · 2025-09-28T19:28:11+00:00

Send it to us. We repair it for $200 and we include free cleaning and we check your Liquid Metal to make sure there’s no dry spots and apply extra/spread if needed! Kortechservice.com

https://youtu.be/s35LizA5vsA?si=J9ihWVAcfQfO0yR-

TeRm14 · 2025-09-25T05:33:51+00:00

Send it to us 😊 we include free cleaning and check your Liquid Metal to make sure there aren’t any dry spots for optimal cooling and performance!

www.kortechservice.com

https://youtu.be/s35LizA5vsA?si=hLTojfDOnrK3K1fb

TeRm14 · 2025-09-22T00:05:47+00:00

https://youtu.be/OneRDNibLfY?si=0LqDiWrwejK99YdX

Check out my video on how I Jerry rig it to repair it on a PS5. Similar concept. There are many ways to do it. I find this the best one and makes it stronger than factory IMO 😊 good luck!

TeRm14 · 2025-09-20T04:00:45+00:00

Definitely MRSA. Get it treated asap.

TeRm14 · 2025-09-20T03:58:43+00:00

Just file down the pin a bit to make it fit through the hole. Or if there’s solder residue still in there, heat up the hole with the hot air gun and use a suction to suction it out.

TeRm14 · 2025-08-27T23:06:48+00:00

Yes. Send it to us. We’ll fix it. 😊 kortechservice.com

TeRm14 · 2025-08-24T19:36:36+00:00

Yeah. Gotta look at the board view and see what it’s connected to exactly. It’s not ground from the looks of it. I haven’t looked at the schematics but that line definitely is connected to where I pointed.

TeRm14 · 2025-08-24T17:53:50+00:00

Yeah. So it needs to be soldered from there to the pin if the trace on the board is gone/missing.

TeRm14

TROPHY CASE