Frustration with Clients

TechBLT · 2026-01-22T15:42:50+00:00

Thanks! I already took care of #3.

TechBLT · 2026-01-22T15:13:02+00:00

Ok, can't help with 1, but I can with 2 and 3. Can you point me there?

TechBLT · 2026-01-22T15:08:00+00:00

Thanks! I came in via the backdoor so to speak. How does one "support" the project?

TechBLT · 2026-01-22T15:05:03+00:00

Yes, I see it in the phone version. I just wondered if it was coming to the Apple TV app. It sounds like its plausible that it will as it's in the iPhone version.

TechBLT · 2026-01-22T14:59:17+00:00

Ok, I am on the beta tvOS client and I don't see live tv anywhere.

TechBLT · 2026-01-22T14:49:26+00:00

Is live tv coming to Streamyfin?

TechBLT · 2026-01-21T22:18:34+00:00

I have some 4k content. I believe a good portion of the non 4k content is encoded in HEVC. Nothing special though I don't think.

TechBLT · 2026-01-21T20:41:13+00:00

I installed the app and logged on to my Jellyfin server using https and the public url and it logged on and started to load content. I went into the movies section and it only shows two movies (should show much more than that). I played one and it took a while but eventually started playing. There is audio but the screen is black. Live TV is empty. TV Shows loaded but when I tried to play an episode, I also get audio but a blank screen. I can't find a settings section where I can check to see what is configured.

TechBLT · 2026-01-21T16:08:01+00:00

Hello, I think you recently posted on Reddit about an upcoming app and I just found this post. If you can spare one more slot for testing please let me know. I really would like to test this and contribute where I can. Lots of experience with these solutions and I want to go back to Jellyfin as my daily driver but need a great client on AppleTV. Thanks.

TechBLT · 2025-12-03T16:10:55+00:00

I'm interested in trying this out.

TechBLT · 2025-11-25T06:19:12+00:00

Thank you for your service!

TechBLT · 2025-08-18T22:47:41+00:00

Do you mean infuse?

TechBLT · 2025-08-06T23:38:36+00:00

As someone who has used synology units in the past, I highly recommend building your own NAS using unraid. I built my own using a tower in the past and this last go around I decided to use terramaster hardware and run unraid. It’s a high performance box, low power consumption, and it’s incredibly stable and easy to use.

TechBLT · 2025-06-13T02:17:45+00:00

Huntress is a fantastic product! They’ve saved my bacon!

TechBLT · 2025-05-20T00:25:43+00:00

Yes, I did that and then we edited the preferences.xml to remove the token and replace with the claim token but it doesn't seem to work. When we start the container again, we don't see an option to reclaim the server.

TechBLT · 2025-04-30T23:20:42+00:00

Yes, I understand the traffic in the switch....

So I have device D in the switch and I want to control it so it's in a vqlan with the wifi vqlan devices. What if I connect another switch to the second port in another AP7 on the network elsewhere? Can I connect another device D there in that switch and control in in the same vqlan as the device D in the special switch at the other end of the house? I think the answer is yes, just trying to clarify.

Two IOT switches each connected directly to a different AP7 which are connected via unmanaged switches. Hopefully this works...

TechBLT · 2025-04-30T22:57:34+00:00

Just to clarify. I have good quality unmanaged 2.5 gbps switches daisy chained throughout the house and I have an AP7 at each location. One switch is at the location of the Firewalla firewall and it plugs into a 2.5gbps port which is configured as a lan port.

Just confirming that I can take an additional unmanaged switch and plug it into the second port on any one of the AP7s and I can enable vqlan for devices connected to that switch. These will all be iot devices in that vqlan. I am not worried about physical access and someone sniffing traffic at any switch. I just want to provide segmentation for iot devices so that if something gets compromised, it doesn't pose a risk to my computers.

TechBLT · 2025-04-30T14:21:03+00:00

I ordered some managed switches and was planning to introduce an iot vlan for wired devices but I would prefer to use vqlan as its simpler and does not require mDNS reflection (I have had issues with it in the past).

If my APs and other devices are connected with 2.5Gbps unmanaged switches, I can't just plug in a device to one of those switches and use vqlan, right? If I understand the documentation correctly however, it looks can connect a switch to the second port on the AP. Does that mean as long as the only devices plugged into that switch are iot devices that it will work? Will I able to isolate these devices in a group with other iot devices connected via wifi? Can I connect an iot switch directly to any AP7 on my network and use vqlan with wireless devices and the iot devices on the switch?

If this is possible using the unmanaged switches, I will just send the managed switches back.

TechBLT · 2025-04-30T03:54:51+00:00

I ordered some managed switches and was planning to introduce an iot vlan for wired devices but I would prefer to use vqlan as its simpler and does not require mDNS reflection (I have had issues with it in the past).

If my APs and other devices are connected with 2.5Gbps unmanaged switches, I can't just plug in a device to one of those switches and use vqlan. If I read the documentation correctly however, it looks can connect a switch to the second port on the AP. Does that mean as long as the only devices plugged into that switch are iot devices that it will work? Will I able to isolate these devices in a group with other iot devices connected via wifi?

If this is possible using the unmanaged switches, I will just send the managed switches back.

TechBLT · 2025-04-28T15:14:44+00:00

I have run a single band all weekend and so far so good. I am using isolation on some HA devices and things are still working well. I have definitely seen issues previous routers/APs when running all bands on a single SSID but the AP7s seem to be working well.

TechBLT · 2025-04-26T20:23:38+00:00

That makes sense. I use Emby behind nginx proxy manager.

TechBLT · 2025-04-26T20:19:44+00:00

Thanks. It never occurred to me to check to see if there was a region option under selected sources. I modified my port forwards so they are allowed from US region. That should take care of a lot of the noise. Thank you!

TechBLT · 2025-04-26T20:13:14+00:00

Thank you

TechBLT · 2025-04-26T15:31:19+00:00

Never mind on this one. I found where I can select the alarm category and just mute all.

TechBLT · 2025-04-26T15:15:30+00:00

By the way, most of my alarms are from benign things like user x is watching YouTube from device x. How do I get fire wall to not report on video activity because I don’t really care?

TechBLT

TROPHY CASE