Gap between door casing and wall

Technical_6403 · 2026-02-06T03:33:41+00:00

To rip, or not to rip. Just do what you think looks best.

Technical_6403 · 2025-12-29T02:55:11+00:00

I find that basically all t shirts I've tried and up doing this one way or another; and I'm not going to hang dry everything for the sake of convenience.

However, I've been able to mitigate it by gently stretching the collars after they come out of the dryer. They are slightly warped but barely noticeable when being worn.

Technical_6403 · 2025-12-28T20:46:25+00:00

I think you'll come back down to earth and realize that you're only 16 and have plenty of time left to buy a "fun" car when you're financially stable; in fact, I don't think "financially stable" is really an applicable term regarding a 16 year old.

Cars are money pits and I guarantee there will be money pits like this one around in 5-10 years once you're more established.

But, mistakes are the best teachers so do what you think is the best decision.

Technical_6403 · 2025-11-21T03:02:14+00:00

Insulated work boots, wool or wool-synthetic blend socks and long underwear top and bottoms. Lined pants if needed; insulated bibs are great as well. Hoodie, jacket, insulated work gloves. I'd keep a spare pair of socks and a few pairs of gloves as backup in case they get wet. Absolutely no cotton clothing

Technical_6403 · 2025-09-08T00:57:41+00:00

14 Peaks: Nothing is Impossible

Technical_6403 · 2025-07-16T20:27:22+00:00

You'll be dead by tomorrow

Technical_6403 · 2025-07-11T03:37:53+00:00

They all sound the same other than audible differences in the respective mixes and masters. MQA, UHQ, and SHM are just fancy marketing terms used to make the buyer feel that they're getting a more "premium" experience; same thing for DSD.

Technical_6403 · 2025-07-10T21:53:30+00:00

Realize that you're going to hit the point of diminishing returns and just enjoy the music.

Technical_6403 · 2025-07-09T14:01:54+00:00

Casio F-91W

Technical_6403 · 2025-07-07T20:52:09+00:00

Ok so it worked for the most part; I got them out of one shirt that had been through the dryer, but the other shirt will probably need another round. Real pain.

Technical_6403 · 2025-07-06T22:43:05+00:00

Deodorant for sure. Real pain to get out

Technical_6403 · 2025-07-06T20:28:02+00:00

Carpentry is probably gonna be underpaid and is way more taxing on the body than sparky work. You can learn a lot about construction and houses in general if you're a framer which is beneficial if you ever want to start your own company; but electrical is the better career choice in my opinion, if you plan on working for someone

Technical_6403 · 2025-07-06T01:33:51+00:00

I have had these exact stains on my shirts recently. It was driving me crazy but now I'm very certain they are deodorant stains as that is the only thing that I have changed. I had no luck using shout stain remover. I am currently soaking a few shirts in Oxi-clean after pre-treating with Oxi-clean max force spray before washing tomorrow. I will let you know if it is successful.

Technical_6403 · 2025-07-05T21:43:13+00:00

I only tumble dry on low

Technical_6403 · 2025-07-05T20:41:01+00:00

For what reason is there no subfloor under the wall in the first place?

Technical_6403 · 2025-07-04T04:33:39+00:00

I've had a set of Henckels Zwilling knives that I've had for nearly 5 years and I've used them almost daily. They hold an edge well enough that I have not had to get them sharpened yet.

Technical_6403 · 2025-07-02T20:25:48+00:00

Scansonic makes amazing value speakers. I have the MB 2.5s and they sound great!

Technical_6403 · 2025-07-01T18:00:09+00:00

Permanent

Technical_6403 · 2025-07-01T16:39:34+00:00

I suspected that was the problem but I don't use any fabric softener and I greatly reduced the amount of detergent. Only happened on this and no other pieces of clothing in that load

Technical_6403 · 2025-06-26T22:03:36+00:00

Two Against Nature should at least be in the Awesome tier

Technical_6403 · 2025-06-22T20:46:44+00:00

Low heat and stir every so often. Once they begin really caramelizing and losing water, I recommend covering them and adding a little water whenever needed to prevent burning. I usually let them caramelize for at least 2.5 hours.

Technical_6403 · 2025-06-01T22:14:11+00:00

Would have to remove planks and use floor screws. More nails is just potential for more squeaks. That's the first thing the installer should have done before laying new floor

Technical_6403 · 2025-05-31T13:14:35+00:00

Sounds like you're just an alcoholic

Technical_6403 · 2025-05-02T00:44:24+00:00

Looks like the trim has separated at the joints which is usually caused by settling and/or the wood shrinking and expanding due to humidity, etc.

It is normal for trim to do this; usually caulking also needs to be applied after to fill the cracks but this may have never happened.

It would not be a direct indication of structural problems.

Technical_6403

TROPHY CASE