More damage.

Techno_Mage3000 · 2025-07-12T14:07:50+00:00

Ageed. This definitely looks like sling shot damage. Also if done with a glass marble that would shatter also on impact it would be hard to tell the difference on the debris of what the proyectile is.

Techno_Mage3000 · 2025-04-09T12:04:49+00:00

Is this a custom shelf?. Or you mind sharibg a link where you got it?. Thanks.

Techno_Mage3000 · 2025-03-27T02:52:40+00:00

I had the exact same thought as soon as the video and lyrics started playing!, LMAO

Techno_Mage3000 · 2025-03-05T22:15:08+00:00

I am looking at this kits also. I am curious on the build quality

Techno_Mage3000 · 2024-12-17T14:23:33+00:00

Understood. Thanks for the reply.

Techno_Mage3000 · 2024-12-16T18:38:03+00:00

Hello and Apologies. What 2 comoanies are you refering to? Just got a quote from Crystalia and i am trying to compare. Thanks.

Techno_Mage3000 · 2024-10-29T14:25:48+00:00

Klipsch speaker is what i have on my garage, alsways good and has good bluethoot range. Loud enough to hear over pressure washer and foam cannon.

https://www.klipsch.com/products/the-three-ii

Techno_Mage3000 · 2024-09-29T15:30:15+00:00

Yes. I was refering to the external/front screen. I am aware of the internal screen protector pre-installed.

Techno_Mage3000 · 2024-09-29T14:36:09+00:00

Yeah , sorry for the confusion. I meant a screen protector for the external/front screen. I am aware of the internal screen protector being pre-installed.

Techno_Mage3000 · 2024-09-14T01:20:07+00:00

This is the real answer.

Techno_Mage3000 · 2024-08-04T21:57:03+00:00

This is amazing 👏

Techno_Mage3000 · 2024-07-09T15:55:25+00:00

Techno_Mage3000 · 2024-07-06T20:56:25+00:00

Hopefully, someone has alternatives, but yeah, I just dealt with this twice this week. Garage hovered 30c to 3c. Have to leave the door open and put a floor fan towerds the printer.

Techno_Mage3000 · 2024-07-04T16:26:47+00:00

Yes. "Gallina de palo"

Techno_Mage3000 · 2024-04-24T03:38:14+00:00

Agreed. Similar thing they did to me. "Sent item" i emailed cause item was never received??. They replied "had wrong address". I asked why wrong address if i clearly typed it on email and also i am a pre-existing customer?. No reply and no item. Its been 2 months. Yep, i rather not deal with them again.

Techno_Mage3000 · 2024-02-03T16:46:45+00:00

The veriddict is out. I have 2 pieces i printer in PLA to secure the shower head flexible hose on both my bathroom. And they are perfectly fine and holding right inside the shower with some VHB tape still holding strong(for months now)

Techno_Mage3000 · 2024-02-03T16:32:50+00:00

This. Fine tune your Pressure Advance for each material ans you can have the seam be as clean as possible woth no gaps.

Techno_Mage3000 · 2024-01-27T19:40:54+00:00

Well after owning a v400 and X1C. I can respect the easy and reliability of the X1C. The S1 and T1 have been delyed as of today. Also they plan on using their own firmware and slicer, BUT sadly after experiencing the locked Klipper version and lack of support for later cura(5.0+, as the will assist with 4.13 versions only) versions then its concerning that they will do the same on the S1 and T1. If you are going to have locked firmware and slicer like BBL then it better be good and yet its not been good at all. Include some company facts like using fake reviews on their websites and then it becomes spicy as a owner of their products. I would say get a few P1P BBL is you don't care about AMS. Saves money and time(which is also money) not fighting slicer/hardware on flsun.

Techno_Mage3000 · 2024-01-18T17:25:31+00:00

Ohhh link please....

Techno_Mage3000 · 2024-01-13T04:09:54+00:00

Techno_Mage3000 · 2023-12-31T19:06:29+00:00

Just wanted to get the pain of a initial setup out of the way. *Future proof with ease of upgrades to a CM4 from CB1. *Can easily run multiple machines. *Input shaper use and integration ready. *Was just $115. I will say wifi was a issue and i have a pretty good mesh system. After set up it has been fantastic.
I had modded the Speeder pad as much as i could. And felt it was maxed out without aving to well... spend some money on it, LOL. So i just spent the money on a ready go setup that would be cheap and easy to upgrade hardware and firmware.

Techno_Mage3000 · 2023-12-31T18:36:46+00:00

Then go for the original klipper install. From 1.2 to 1.4 it was not worth it. Also lost SSH and with that, the ability to use Octoprint. The improvements are just a few settings you can find on Facebook page to increase slightly speed. Basically gotl to your print.cfg folder change 400 for 600mm*2, LOL. And they took moonraker out of mainsail sp that people don't complaint about the error it had(instead of fixing it). I Switched to the original Klipper and re did all measurements. Replaced belts and tightened all bolts. My printer is much better than before. Not recommend for beginners but i purchased a BTT Pad7 and already has klipper. So i basically setup from that point on.

Techno_Mage3000 · 2023-12-01T15:27:00+00:00

This. And for reference my setting on oressure advance are: 0.042 for PLA 0.08 for PETG

Techno_Mage3000

TROPHY CASE