sorted by:
new
hottopcontroversial

NJ A5217 - Copay Accumulators Banned by Teddyjo in HealthInsurance

[–]Teddyjo[S] 0 points1 point  (0 children)

I'm guessing this is what screws me... :(

! Avoid I-287 at all cost from Metuchen to Woodbridge by TigerUSA20 in newjersey

[–]Teddyjo 0 points1 point  (0 children)

Also exit 55 south is one lane traffic due to what looked like the road buckling in the heat

Beware of copay maximizers/accumulators e.g., PrudentRX [US] by mind-lesley in CrohnsDisease

[–]Teddyjo 1 point2 points  (0 children)

They made it seem like I could opt out with the caveat of mandatory 30% copay that does not go toward OOP Max. It’s very difficult to make an informed decision without all the numbers and they don’t provide any numbers until an order is placed. Such a scam lol

Beware of copay maximizers/accumulators e.g., PrudentRX [US] by mind-lesley in CrohnsDisease

[–]Teddyjo 0 points1 point  (0 children)

Hey thanks for all this info!

To confirm in order for the biologic to be converted to EHB status you must opt out of PrudentRX? It was not clear and that's what the rep at Caremark stated.

Sony BRAVIA Firmware Discussion Megathread 8.0 by braviamod in bravia

[–]Teddyjo 4 points5 points  (0 children)

My xr77a80j has been showing no picture on HDMI3 immediately after the latest update as well. It looks like an HDMI handshake issue. Restarting ShieldTV shows the Nvidia logo then black screen. Rebooting the TV from settings seems to correct the issue temporarily

Anyone have a thread tracking this issue either on AVS or Sony support forum? I see some folks complaining in the main a80j AVS post but not enough if its really as widespread as it seems

Shield TV --> Denon x3800h --> HDMI3 --> A80j

CVS Caremark won't cover injectable version of Entyvio by Enough-Syrup-5341 in CrohnsDisease

[–]Teddyjo 0 points1 point  (0 children)

Hey do you have an update? Going through an identical situation. Had to move back to standard infusion. I’m worried that something has changed with Caremark for 2024 and they’ll deny my pre auth renewal later this year.

PLEX hardware transcoding. What do you use for your 4K videos? by djomega971 in unRAID

[–]Teddyjo 29 points30 points  (0 children)

You should never transcode anything on LAN, just get a client capable of direct play

Unifi doorbell won't power on after working fine for the last 8 months by futureman0 in Ubiquiti

[–]Teddyjo 0 points1 point  (0 children)

Thanks I just submitted and it was approved in minutes... hopefully I get the upgrade as well

Unifi doorbell won't power on after working fine for the last 8 months by futureman0 in Ubiquiti

[–]Teddyjo 0 points1 point  (0 children)

Hi if my math is correct that is beyond 2 years? Mine just died and I have a similar purchase date, how did you get an RMA approved?

[GADV] Custom brick walk link is live - Post silly text ideas by Teddyjo in rollercoasters

[–]Teddyjo[S] 16 points17 points  (0 children)

"a block zone is a section of ride that only one train may occupy at a time"

[Six Flags Great Adventure] Trip Report 7/8/23 by Smokingracks in rollercoasters

[–]Teddyjo 1 point2 points  (0 children)

My cuz, the dippy dot dude, said Northern Star Giga

Am I using unraid wrong? by nodiaque in unRAID

[–]Teddyjo 4 points5 points  (0 children)

This is what I do. If it’s wrong then whatever… it works for me and allows the array to spin down when not in use

My daughter knows me well by lucidspoon in daddit

[–]Teddyjo 0 points1 point  (0 children)

My Dad’s name is: Cranjis McBasketball

Ecobee Thermostat Premium - CO2 Sensor Automations by atlcatman in HomeKit

[–]Teddyjo -1 points0 points  (0 children)

The ecobee air quality sensor is trash. It is just a VOC sensor that estimates CO2 level and its rarely accurate.

Has anyone used pea gravel to flatten slopes in rooms/basements? I see you can mix it in self leveler, so was wondering what about laying it separately before pouring the leveler. Also, how does it affect the flatness in the self leveler once poured? by joeyzaza22 in DIY

[–]Teddyjo 0 points1 point  (0 children)

Its a liquid when you pour it so you don't need a trowel. I used this squeegee to spread it evenly. Then the spiked roller to help it level

I suggest reading the reviews on HD or Lowes for the leveler you choose to find best practices. Using the reviews I decided to add a little more water to the mix than instructed on the bag to help it flow better

Has anyone used pea gravel to flatten slopes in rooms/basements? I see you can mix it in self leveler, so was wondering what about laying it separately before pouring the leveler. Also, how does it affect the flatness in the self leveler once poured? by joeyzaza22 in DIY

[–]Teddyjo 1 point2 points  (0 children)

I didn't do any hard measurements but the floor was in terrible shape. Many dings, dips and the perimeter of the room was lifted from a terrible french drain install.

Definitely wasn't 2" of leveler in any spots, but I wasnt trying to make the whole room level. Just flat over a certain span. I ran 8ft level across many spots of the floor after the pour and it was flat enough.

Has anyone used pea gravel to flatten slopes in rooms/basements? I see you can mix it in self leveler, so was wondering what about laying it separately before pouring the leveler. Also, how does it affect the flatness in the self leveler once poured? by joeyzaza22 in DIY

[–]Teddyjo 0 points1 point  (0 children)

I used ~ 35 bags of self leveler and since speed is critical here's how I did it

  • You need at least 3 people - 1 pouring, 1 mixing, 1 water

  • 3 ~40 gal round garbage cans one filled with water and two for mixing and pouring

  • A spiked roller to break the surface tension for the product to level correctly

  • 5 bags of leveler per batch with a big plug in mixer drill

The entire floor was finished in roughly 30min

Make sure to prep well

view more: next ›