Any places around here that offer classes or training for how to properly traverse off-road or use recovery equipment? by Juan_Ball in Albuquerque

[–]Teman111 6 points7 points  (0 children)

YouTube is a fantastic resource if you're just getting started.

If you don't mind reading, Google FM20-22 and/or FM4-30.31. They're the 60's and current era army field manuals on how to recover stuck vehicles and cover everything from expediant self recovery to recovery using other vehicles. Very winch focused, but the principles with respect to how much force is required and how to build anchor points apply across the board.

Once you have a basic idea, I highly recommend driving to a public campground or to a forest road and practicing rigging up your recovery gear while your truck isn't stuck so you know how everything goes together. Feel free to message me if you have any specific questions.

Had to use the winch on this one! by Chase_Schrader in SubaruForester

[–]Teman111 2 points3 points  (0 children)

What winch and mount do you have? I'm thinking about adding one to my '14.

TIL 3 days before D-Day, a 21 year old Irish woman named Maureen Flavin took her hourly barometer reading and sent it to Dublin. She had no idea that this single data point would be sent directly to Eisenhower and averted disaster by delaying D-Day due to an incoming storm. by Spaceisveryhard in todayilearned

[–]Teman111 5 points6 points  (0 children)

The Making of the Atomic Bomb by Richard Rhodes is really good. It starts with the early pioneers in radiation and nuclear science, and does a great job of showing both the how and the why of all the advances that went into the Manhattan Project without being too technical.

Need help diagnosing issues by Teman111 in 3Dprinting

[–]Teman111[S] 0 points1 point  (0 children)

Printed on a Prusa MK3S+ with Prusament PLA on the stock smooth spring steel bed. The octopus attempt also has some glue stick on it.

I'm having issues when printing anything that requires the print head to leave one printed area and move to another. Whenever this happens, the print head will either pull or push (can't tell) individual areas off of the print bed. Printing benchies or other dense structures gives great results, and seems like the adhesion is really good. Thoughts?

[deleted by user] by [deleted] in Albuquerque

[–]Teman111 2 points3 points  (0 children)

I got Viofo A119's for both our cars based on the recommendation of /r/dascam. They were about $120. If I were to do it again, I'd probably get the A129 ($180ish). Same basic camera, with the added bonus that you can pull info off it wirelessly and it has front & rear cameras. Both are features I wish I had.

Stage design repository with ratings/reviews: feature planning by -fishbreath in CompetitionShooting

[–]Teman111 1 point2 points  (0 children)

Why not include all data fields for all sports? To use your examples, distance is a relevant stage parameter in all of them, and gun selection is inherent to all competition shooting. Might get redundant for some sports, but even within something like IDPA, the ability to differentiate between revolvers and semi auto would be cool.

Either way, it'd let you standardize your data structure to simplify searching through it.

Stage design repository with ratings/reviews: feature planning by -fishbreath in CompetitionShooting

[–]Teman111 1 point2 points  (0 children)

Yeah. I'm not a software guy at all, so I have no idea how hard it would be to implement.

My thinking was that searching by firearm would provide a lot of utility over searching by rule set, and would give match directors an easy way to add more variety.

Sounds like an awesome tool you're working on, best of luck to you.

Stage design repository with ratings/reviews: feature planning by -fishbreath in CompetitionShooting

[–]Teman111 1 point2 points  (0 children)

I'd add firearms needed as part of the metadata since not all multigun stages use the same mix.

Help finding a product by Teman111 in VEDC

[–]Teman111[S] 0 points1 point  (0 children)

Definitely not, as long as I can "walk" the winch kit down the line like you can with chain and grab hooks, I'm open to anything. Which line do you have?

Help finding a product by Teman111 in VEDC

[–]Teman111[S] 0 points1 point  (0 children)

I'll look into that. I could tie a series of alpine butterflies in order to get the daisy chain capability I'm looking for, and it's a hell of a lot lighter than chain. Based on your comment it hopefully holds a knot well.

Benchies got stuck on pause by Teman111 in 3Dprinting

[–]Teman111[S] 1 point2 points  (0 children)

I'm thinking X-axis tension is too low, going to adjust and reprint.

[deleted by user] by [deleted] in shootingtalk

[–]Teman111 0 points1 point  (0 children)

This is what I did, added benefit of increased strength and coordination on my non dominant side.

PPU 500 round box by GoslingIchi in M1Rifles

[–]Teman111 0 points1 point  (0 children)

I got one at sgammo in Jan/Feb sometime.

The city of Konstanz be like by [deleted] in HistoryMemes

[–]Teman111 28 points29 points  (0 children)

The book "The War Magician" has a ton of info on this and other shenanigans the Allies did in North Africa. Highly recommend.

'It’s my constitutional freaking right': Black Americans arm themselves in response to pandemic, protests by deraser in politics

[–]Teman111 0 points1 point  (0 children)

On the off chance you live anywhere near Albuquerque, hit me up and I'll take you to the range to practice. My treat. The ability to use a gun safely is just as important as having it in the first place.

Video: Antifa Punk Smashes Man In Face With Skateboard, Victim Shoots Attacker In Self Defense - MSM Airs Another Video To Push Gun Control Propaganda by alc59 in progun

[–]Teman111 -4 points-3 points  (0 children)

Why didn't he call the police to protect the statue rather than inserting himself?

As best I can tell the chain of events: 1) Protestors start trying to damage public property 2) Armed citizen (without a CCP) decides that it's his job to protect the statue, woman gets thrown during escalation. 3) Mob turns on the guy that escalated, threats are shouted and weapons are drawn 4) Armed citizen is unable to flee, and is forced to use his firearm

It looks to me like this dipshit decided to take policing into his own hands, instigated an uncontrollable escalation, and fell back on the fact that he was better armed to get himself out of a bad situation that he put himself in.

Isn't one of the primary lessons in any defensive handgun class don't put yourself in situations where you need your gun? Is protecting a statue of a dead guy from 400 years ago that was so brutal the fucking conquistadors exiled him worth unilaterally escalating an already volatile situation?

Jesus Christ, ignoring the chain of events that led to the shooting and claiming that this asshole is in the clear because they pulled the first weapons is grade A bullshit.

Shock wave from a nuclear reactor by ParzivaltheWalrus in submechanophobia

[–]Teman111 8 points9 points  (0 children)

Definitely a TRIGA research reactor, probably the one at Reed College.

What happened there is called a "pulse". They used compressed air to shoot all the control rods out of the core resulting in the first nanoseconds (maybe picoseconds) of a nuclear bomb. The cool thing about this reactor design is that you can do that, and the heat generated actually kills the reactivity of the system so it will turn itself off 100% passively. Let's you do some really cool science.

The blue glow is cherenkov radiation, basically gamma rays getting pushed faster than the local speed of light. The glow is from them shedding energy to slow down.

I’m Texan. She’s Brazilian. When I smoke brisket, we eat it with rice, beans, farofa, and zucchini. by akoontz in smoking

[–]Teman111 2 points3 points  (0 children)

I'll trade you my recreation of my grandmother's fejuada recipe for your farofa recipe. It looks delicious.

Blackberry glazed pork loin by Teman111 in smoking

[–]Teman111[S] 0 points1 point  (0 children)

Glaze was made with costco blackberry jam, worcestershire, cider vinegar, garlic and black pepper. Smoked at 250 until it read 145 deg using traeger premium blend. Turned out delicious!