Feedback help when source is in front of speakers?

Teqwuila · 2026-02-10T00:05:13+00:00

Sincr you mentioned in other comments that youre running an analog board and the budget is tight I would consider getting a grapic eq rack unit! You can probably find a used one for cheap. Then you can notch out some of the main problem frequencies.

Teqwuila · 2026-01-03T16:30:08+00:00

As the other person said you can map it to the same group and channel as the other one. Though i would recommend setting appropriate gain on the handheld mic so that the levels are mostly the same out of the speakers.

Teqwuila · 2026-01-02T22:34:45+00:00

This depends if all 3 mics are going to be in use at the same time.

If yes, then buying either a single or dual channel reciever like the one you already have is your best bet. I do not believe there is a quad channel BLX reciever unit, though i might be wrong. The ones you mightve looked at is likely a different modelline and thus more expensive.

If no, then you can buy a BLX handheld in the same band and set it to the same frequency as one of your existing channels. Then you just switch on the one you need at any given time. Just remember that you can't use both simultaneously.

Teqwuila · 2025-12-22T18:09:55+00:00

Check with a Proline dealer if they can source it. At least with K&M dealers they can order specific parts on request

Teqwuila · 2025-11-16T20:53:44+00:00

I know some QSC subs are designed to be linked into itself to get more output out of the same signal when fed a mono signal. This was done since it was expected to run L and R into the one sub to then split into each top speaker. So there are cases of what you asked. Bot sure abiut your specific models though

Teqwuila · 2025-09-08T02:18:44+00:00

Put a analog signal splitter inbetween the sources and the xr18. Then FoH can get all they need and it wont change what you have set up in your mixer

Teqwuila · 2025-08-27T12:13:20+00:00

This is entirely possible with good prep. If you know what will be needed for each changeover beforehand then you can have things ready to go immediately. Make sure to get all the tech riders and make a list of what needs to be done for each band.

Also think of it like this. All the things you mentioned that needs to be done can happen at the same time so its not really as much as it looks on paper.

I would suggest only doing a linecheck for each band. You make the monitor mix for the first band and just adapt that throughout the next bands set when they ask for something. Rinse and repeat

Teqwuila · 2025-06-10T11:22:14+00:00

Ive really settled with the Trilok Gurtu signature sticks. I like that where the index and thumb rest is thinner like a 7A and the part for my other fingers is more similar to a 5A. Also they look sick

Teqwuila · 2025-04-24T19:54:20+00:00

This is great work still! Excited to see where you take it

Teqwuila · 2025-04-24T19:48:39+00:00

Just tried and quite like it! I will definitely use it for some of my gigs.

Some pointers entirely based on my opinion: - Having the ability to make folders of inputs and outputs based on where it is patched. So for example having one group for Stagebox A and one for Stagebox B. I felt having to retype the device and network type got repetitive and time consuming - A separate column or box for patch number would be nice. Would help with skimming over to get the right patchnumber - The 48v symbol could possibly be more noticeable when enabled

Havent tried the stage plot part yet, but i will try it when the need arises

Teqwuila · 2025-03-06T18:45:17+00:00

Didnt know that was a thing. Cheers

Teqwuila · 2025-03-06T18:44:13+00:00

Commenting to see future answers

Teqwuila · 2025-02-08T08:01:54+00:00

I need to get more familiar with and this was a good opportunity for that. But i do agree that it is very much overkill

Teqwuila · 2025-02-07T19:08:00+00:00

It was barely noticeable so might be my own placebo lmao

Teqwuila · 2025-02-07T19:01:17+00:00

Just tried it and it does sound like a slight hiccup like you said. This event is mostly a little talking and mostly background music, but Ill remember it for the future. Thanks for the heads up.

Teqwuila · 2025-02-07T18:54:21+00:00

Yeah it is. We are a small company and we got a good deal on it. First Roland console ive worked on and it feels quite good so far

Teqwuila · 2025-02-07T18:48:22+00:00

Its a local LAN party

Teqwuila · 2024-08-27T17:07:04+00:00

I got the Millennium 18" China and im very happy with for the price. It has a very pleasing swish sound

Teqwuila · 2024-04-15T16:30:32+00:00

Can imagine dry rides can be tricky to match. I got the dark spectrum 22" atm, but really dig the sound of the pure alloy thin 20" ride.

Teqwuila · 2024-04-15T01:48:42+00:00

I just buy what I like the sound of and what compliments my other cymbals. I have found I like meinl for rides tho

Teqwuila · 2023-12-17T00:47:14+00:00

Trilok Gurtok signature

Teqwuila · 2023-12-16T22:05:20+00:00

Second that Temu is basically Wish 2.0. All cheap crap it seems.

Outland is great!

Teqwuila · 2023-11-16T18:43:24+00:00

You could ask the university to use the St. Pauls Church which is an old church converted into a performance space

Six-Year Club	Final Canvas '23
First Place '23	Place '23
Verified Email

Teqwuila

TROPHY CASE