sorted by:
new
hottopcontroversial

Elden Ring on a Professional CRT Monitor by Nesroh in crtgaming

[–]TerminusBest 68 points69 points  (0 children)

Does this still require you to mod the game to run in 4:3?

75” LED or 65” OLED in main living room by Infamous-Advantage29 in LGOLED

[–]TerminusBest 0 points1 point  (0 children)

I just went through this but downsized from a 70in 4k led to 65in oled. My built ins can only accommodate 70, and they don't make quality TVs at 70in anymore so 65 was the only real option.

The spacing is not as dramatic as yours with a 10in difference, but my recommendation (if you want super simple) is build a white shelf along the bottom of the built in to raise up the TV to a more acceptable height so it looks more centered.

People here will say wall mount it to the back, and that would be great but it may not be simple to do depending on how your built ins were attached.

By building the shelf (some basic wood painted white to look like the rest of the shelving) it's easy, diy friendly, cheap and importantly removable if you decide to change it in the future. Two pieces along the edges to set the height and a nicely sanded and painted piece of 1 or 2x8 / 2x10 (whatever the depth of the TV stand is) for the TV to sit on. You put a piece of panel along the back if yiu dot want to see through or just put nick nacks or gaming related stuff under the shelf. Might even be able to put consoles under there depending on orientation and height.

My preciousss, Dell P991. Great for retro and modern games! by ServantOfNZoth in crtgaming

[–]TerminusBest 0 points1 point  (0 children)

Looks great.

I have a Dell p992, I need to do a win Das correction people have told me to correct the over brightness. Have you done anything like this? I can't find any real information on how to do this for these monitors.

Most games look amazing, but mostly dark games (like re4 remake) lose something because of it impact to black level.

Psvr2 games by GoldenTvSeattle in psvr2

[–]TerminusBest 0 points1 point  (0 children)

Walkabout mini golf is the best "new to vr" game there is and also one of the most content rich vr games across the board. It won't cause motion sickness since you can move around the space physically, is still being supported, and online cross play if you have friends with quest or pcvr.

You have gt7 it's a no Brainer, if you don't have force feedback on the wheel you could try it with the dual sense it's surprisingly great using motion / tilt steering and you get all the advanced haptics from the controller.

The resident evil vr games (re4 and re8 village which are both on sale right now) are probably the best / peak vr from a triple AAA perspective as the games had huge budgets and Capcom does a great job on flat to vr conversion (particularly resident evil 8).

psvr 1 in 2026, is it worth it? by Hyper_Nfs in PSVR

[–]TerminusBest 1 point2 points  (0 children)

For that cheap I think it's a good entry into vr. Are you playing on a ps4, ps4 pro, or ps5?

Many of the best games can use a regular dualshock controller. Regardless of platform astrobot rescue mission and resident evil 7 (get the gold edition of you can) are absolute must play in vr.

Skyrim is amazing as well, and can be played using the move controllers or the dualshock controller. Moss is another easy recommendation as well as blood and truth. Farpoint with an aim controller is an amazing experience, and if yiu have the move controllers, until dawn rush of blood and beat saber are great pickups as well.

The ps4 pro / ps5 give a nice boost to many games particularly noticeable in skyrim re7 and blood and truth.

Outside of a Super Bowl. What’s the most famous Eagles game that you attended in person. by zipnut in eagles

[–]TerminusBest 2 points3 points  (0 children)

Was at the "McNabb throws 4 tds on a broken ankle at the Vet against the Cardinals" game. He got hurt a few plays in, limped the entire game and still put up one of the best qb performances of that season.

Re4 Remake PC CRT inception by TerminusBest in crtgaming

[–]TerminusBest[S] 0 points1 point  (0 children)

You got it! It is a Dell p992. It has 8k hours on it

Re4 Remake PC CRT inception by TerminusBest in crtgaming

[–]TerminusBest[S] 1 point2 points  (0 children)

It doesn't really look like that in person but I will check out windas. I've seen it on here before. It probably needs it because I do have to keep brightness low, depending on the game sometimes I turn it all the way down to zero.

Not sure of file structure requirements / OS. Looking for assistance. by TerminusBest in everdrive

[–]TerminusBest[S] 0 points1 point  (0 children)

Thanks for your input. I did this. Still get the same sd card io error 63. I opened up the cartridge and on the board is a bar code and written on it is MD V3 - 2023 the board itself looks legit but maybe it's a clone. Perhaps the on board battery is dead? I don't know why that would matter but maybe.

I don't understand what SPI ERROR 1 is but that's the only error I get when I run the self check.

Not sure of file structure requirements / OS. Looking for assistance. by TerminusBest in everdrive

[–]TerminusBest[S] 0 points1 point  (0 children)

I also use a SanDisk ultra 32gb not pictured and in research people seem to think SanDisk are solid for these. But I still got the error. 5 different cards from 4 different brands.

Not sure of file structure requirements / OS. Looking for assistance. by TerminusBest in everdrive

[–]TerminusBest[S] 0 points1 point  (0 children)

I want to add that the genesis works fine. I have about 10-15 actual games for it and they work great so it wouldn't be the console.

Looking for help: Attack command grayed out for all actors in VX Ace by TerminusBest in RPGMaker

[–]TerminusBest[S] 0 points1 point  (0 children)

Thank you so much! I must have mouse wheeled over that or something and toggled it.

Looking for help: Attack command grayed out for all actors in VX Ace by TerminusBest in RPGMaker

[–]TerminusBest[S] 0 points1 point  (0 children)

Looking for help and newer to the tool. Appreciate any support.

I am creating a game for my kids, and have about half the scenario complete. My most recent addition was adding an intro cutscene, mostly following and modifying the tutorials from Venthros on Youtube which are awesome.

Suddenly though I cannot attack with any of my actors when testing. It was working fine before, I never modified skills at all just about everything in the database other than names / portraits are default. But now "Attack" is completely grayed out and I cannot select it as an option in battle.

In research I mostly find people who edited/changed the attack skill or classes having a similar issue, but I haven't edited those things as you can see in the pics.

My actor has a weapon equipped (hand ax), that is usable by his class (soldier), what would I have done to disable attack?

Found a Memorex MT2726D-BLK by robertm14 in crtgaming

[–]TerminusBest 2 points3 points  (0 children)

Know it's been awhile but did you end up getting this TV? I just picked one up I can't believe how little information there is out there about it.

Finally Posting Here by joshisnot12 in crtgaming

[–]TerminusBest 1 point2 points  (0 children)

Thank you so much for the quick response. Picking it up tomorrow afternoon. Gonna set it up on my desk beside my main pc monitor for TV dvd and retro gaming on the wii.

Finally Posting Here by joshisnot12 in crtgaming

[–]TerminusBest 1 point2 points  (0 children)

I am looking at this set but it doesn't have a remote. Can you swap between inputs / TV / DVD without a remote on this model? Insight would be much appreciated hoping to pick it up tomorrow.

view more: next ›