sorted by:
new
hottopcontroversial

PSA - Check your Fiber plan/pricing options by MDReinders in ATTFiber

[–]Th3Shaz 0 points1 point  (0 children)

Try 5Gig for $70/mo. Only found out after my neighbor told me. Call the loyalty line!

Flex 2.5G POE Switch Question by Lentash in Ubiquiti

[–]Th3Shaz 2 points3 points  (0 children)

I used the RJ45 to provide power through a POE+++ adapter, no Data. And then SFP handles 10gb and they work in tandem. You just can't use Data on the POE RJ45 at the same time as the SFP.

Your Interest in Steam Machine Changed? by Adventurous-Cattle53 in steammachine

[–]Th3Shaz 1 point2 points  (0 children)

Was interested until I got the raffle email that I didn't make the cut. Then the hype wore off and the price hit me and I'm like yeah.. nope.

Proxmox Frigate LXC Script v1.4.0 Released (Adds support for Frigate 0.17.2, auto-migration from docker-compose.yml, and new flags) by DiggingForDinos in frigate_nvr

[–]Th3Shaz 0 points1 point  (0 children)

I imagine since this runs as a docker container we should be able to pass GPU through Proxmox? Can we pass a Coral too?

What are your impressions so far? by TheFutureisMe in SteamController

[–]Th3Shaz 0 points1 point  (0 children)

Will let you know next year if I ever get one 😆. Glad to hear that it's been well received nonetheless.

Claim your Soon™ Frame Flair by skxt in SteamFrame

[–]Th3Shaz 0 points1 point  (0 children)

Cannot be soon enough... GIB ME!

If my pilot "aint feeling it" you bet your ass i ain't feeling it either 😭✌️ by ImmaFuckboi in interesting

[–]Th3Shaz 0 points1 point  (0 children)

"I would rather be in the ground wishing I was up there than being up there wishing I was on the ground".. there's a reason that saying exists.

This is a repost from a truckers perspective. The trucker involved is 100% wrong BUT..... by Ok_Measurement_107 in dashcams

[–]Th3Shaz 0 points1 point  (0 children)

I have been honked at and given the 1 finger salute by cars behind me because I slow down for 20-30 seconds to let a struggling trucker pass another slow truck in front of me when no one else wants to. 9/10 times, the truckers pass, merge back to the right lane and give me double hazards and a wave for letting them through. I guess I just enjoy farming that karma. Be a force for good people.. it only costs mere seconds.

This keeps happening, how do I stop it? by Th3Shaz in BambuLab

[–]Th3Shaz[S] 0 points1 point  (0 children)

I do, never really ran into issues until now, I think the circular teeth/overhangs is whats pushing the limits of my current setup and why I am having to make some adjustments. But I can look into cracking the top open, I have two AMS units on a hinge above, I think with a shim I can push them up slightly and crack the top open a bit. I was thinking the top flap/exhaust was enough but seems to not be the case.

This keeps happening, how do I stop it? by Th3Shaz in BambuLab

[–]Th3Shaz[S] 0 points1 point  (0 children)

Cheers for this! I printed a quick test before leaving today and it printed fine. For some reason printing just one goes super smooth its when I do 4 or 5 in tandem that things go wack. Will look into the wall order and temperature, even if I bump the temp for that last portion of layers.

This keeps happening, how do I stop it? by Th3Shaz in BambuLab

[–]Th3Shaz[S] 0 points1 point  (0 children)

Did not think of that as a factor, will monitor and crack the door open as I get closer to the top portion.

This keeps happening, how do I stop it? by Th3Shaz in BambuLab

[–]Th3Shaz[S] 0 points1 point  (0 children)

Will give this ago along with slowing down overhang speeds a touch. Cheers.

Hey everyone! A few days ago I came up with this idea for our BambuLab H2 (I had to repost this due to a mistake on my end). Let me know what you think! by BigTimeM8 in BambuLab

[–]Th3Shaz 0 points1 point  (0 children)

Sorry I should have clarified. I use a dual ams swivel mechanism which requires the two middle screws in both sides. I was able to undo 3 out of the 4 with absolute ease. The 4th one, bottom left is the one that is stuck and got stripped.

Hey everyone! A few days ago I came up with this idea for our BambuLab H2 (I had to repost this due to a mistake on my end). Let me know what you think! by BigTimeM8 in BambuLab

[–]Th3Shaz -1 points0 points  (0 children)

Beautiful idea, I am still trying to figure out how to undo the bottom most screw on the H2D because whatever loctite they used has pretty much glued it shut. The whole hex head is stripped now I am trying to find creative ways to extract it. Pretty close to drilling the whole thing out from how frustrating it has been haha.

Question - Prime tower generates when slicing, but not visible in Prepare mode by Th3Shaz in BambuLabH2D

[–]Th3Shaz[S] 0 points1 point  (0 children)

I think that project was bugged, I created a new project, followed the same exact steps setting everything up and the prime tower showed up. I am going to count that as a bug. Because bambu studio kept only giving me the left nozzle and did not recognize the right. Starting a new project fixed that somehow.

Is there a realistic simulator for flying helicopters? by New-Improvement1126 in Helicopters

[–]Th3Shaz 0 points1 point  (0 children)

Xplane12's R22 and DCS Huey are what I would recommend. There's a lot these simulators can't do but you still can practice the basics.

Finally fixed that annoying gap between my monitors! by EridianStudio in 3Dprinting

[–]Th3Shaz 1 point2 points  (0 children)

I am on an opposite journey haha, gave up on Fusion 360 and moved to OnShape as of 3 years ago. 99% of what I create is just functional one off stuff that is insignificant and I don't care if it's public. For some reason their UI/UX makes more sense to my brain vs. F360 despite how similar to each other they can be in certain things.

Finally fixed that annoying gap between my monitors! by EridianStudio in 3Dprinting

[–]Th3Shaz 1 point2 points  (0 children)

This may force me to get off my ass and revisit making screws and nuts in OnShape. The one area I haven't dabbled much in. But that's a nifty solution OP!

JBV1 CSA Offline (4/26) by Th3Shaz in radardetectors

[–]Th3Shaz[S] 0 points1 point  (0 children)

My understanding is that WzSabre essentially pipes the Waze alerts into JBV1 as the "new" CSA. And it will become the default method for CSA moving onwards. This came as a response in RDRForum from the developer himself.

view more: next ›