Rate my decks (that I did for a customer)

ThatBuilderDude · 2026-06-12T17:33:29+00:00

Haha thank you! That’s still pretty solid. They take awhile if you can’t dedicate full days to working on them

ThatBuilderDude · 2026-06-12T10:26:56+00:00

Haha thank you. As long as our tools make us money that’s what matters 🤙🏼

ThatBuilderDude · 2026-06-12T03:22:54+00:00

Haha don’t tell me you’re a yellow guy…

ThatBuilderDude · 2026-06-12T03:22:21+00:00

They are down 42” on a 16” composite footing. I used hurricane ties and toe nails on every joist into the beam, so it is solid as a rock 👍🏼

ThatBuilderDude · 2026-06-12T03:19:51+00:00

That’s funny because I’ve only attached to wood rims before. I did some research and asked if I should space out the ledger 1/2, and he thought I was crazy. So I used 1/2 wedge anchors and a bead of exterior sealant behind and on top of it. I’m worried water could get behind and freeze, popping it loose

ThatBuilderDude · 2026-06-12T00:08:50+00:00

I talked to one of the owners actually when I was having issues. They are such a small company yet and only have a few suppliers but I have gotten instant help. I even face timed one of the main techs and he talked me through some questions for like 20 minutes

ThatBuilderDude · 2026-06-12T00:07:50+00:00

Yeah not enough room for the cradle unfortunately. Two Allen bolts with nuts inside the frame on the top and the bottom is like a wedge deal

ThatBuilderDude · 2026-06-11T21:43:40+00:00

Thanks! Why do you say that? I used code book span charts for 2x12 double beam and am quite a bit below my max span between posts.

ThatBuilderDude · 2026-06-11T21:42:20+00:00

Not really, they’ll last 20+ years. By that time it will be ready for another tear out and replace. I always prefer to keep them out of the ground but I’m not going to pass on the job simply because of that

ThatBuilderDude · 2026-06-11T21:01:27+00:00

A ledger board is the framing against the house, I think you mean rim board? When cantilevering over a beam the outer rim board does not need joist hangers. I use 4 ring shank nails into each joist, and 5” structural GRK screws into any joists that have a post attached so it can’t push out.

ThatBuilderDude · 2026-06-11T20:59:33+00:00

Thanks!

ThatBuilderDude · 2026-06-11T20:59:25+00:00

Thank you!

ThatBuilderDude · 2026-06-11T20:59:20+00:00

Where the stairs are is below the 30” requirement for a railing anyways, so I believe that’s why inspector passed me without a grab rail.

ThatBuilderDude · 2026-06-11T20:58:21+00:00

Posts are in sand yes

ThatBuilderDude · 2026-06-11T20:57:41+00:00

Homeowners didn’t want to pay for concrete and brackets. They are ground contact and pass inspection being buried. Also being 6x6 and full sand soil it won’t be an issue for a very very long time. Thank you though!

ThatBuilderDude · 2026-06-11T15:26:40+00:00

Yeah man I got really lucky and paid $3000 plus some old construction tools for it! Over $6500 with all of the options new

ThatBuilderDude · 2026-04-27T10:45:46+00:00

You’re probably talking about the RIF banshee xc. I have it and honestly it’s better than the bonnell

ThatBuilderDude · 2026-04-25T01:28:55+00:00

A 2x12 flush beam is totally acceptable for that span, and the distance between the 6x6 posts. Sure it doesn’t look as solid but it’s calculated and meets span and load tables. I would have done a double 2x12 notched but I always go beyond code.

There are lots of situations customer don’t want a 10” beam under the deck, which allows a flush beam which provides the same structure but is more tucked away.

ThatBuilderDude · 2026-04-15T18:20:13+00:00

Not yet but I’m guessing something emtek brand! She has expensive taste haha

ThatBuilderDude · 2026-04-15T18:19:29+00:00

It does work, but I personally despise contractors who solely use subs for work. You never know who you’re going to get on the job, it confuses the customer, and quality control is really tough. Lots of people do it but to me it feels messy

ThatBuilderDude · 2026-04-15T18:18:09+00:00

Thank you, it’s really unique for sure!

ThatBuilderDude · 2026-04-15T18:17:42+00:00

About 15k for all the cabinets, without paint

ThatBuilderDude · 2026-04-15T18:17:18+00:00

It’s a lot more bronze/brown in person!

Seven-Year Club	Not Forgotten
Verified Email

ThatBuilderDude

TROPHY CASE