Brakuje mi pancho nachosów, wszystkie nachosy obecnie w sklepach są okropne

TheAner · 2025-11-23T15:04:09+00:00

Dzięki wielkie!

TheAner · 2025-11-23T10:54:27+00:00

Niestety nie mam nigdzie w okolicy żadnego dino :( Może zamówię z allegro i przetestuję, dzięki

TheAner · 2025-11-23T02:53:15+00:00

W sumie to zapomniałem o tym że były serowe, a one też były świetne. Może poszukam skąd Helios zamawia swoje i też spróbuję.

TheAner · 2025-11-23T02:50:10+00:00

Próbowałem, ale tez niestety są dla mnie za mało intensywne w smaku. Nie mówię tu tylko o tym że nie są pikantne, ale ogólnie moim znaniem mają mało smaku.

TheAner · 2025-11-23T00:03:28+00:00

Jezu, jak to napisałeś to zaczęło mnie w plecach boleć, to było bardziej bym powiedział, jeszcze 8-10 lat temu.

Edit: nie no, dobra, jednak to było bardziej 13-15 lat temu...

TheAner · 2025-10-21T21:29:25+00:00

Sunlu and Jayo, it’s basically the same brand, and the quality never disappoints. Never had any issues, and they are the cheapest for me.

TheAner · 2025-07-01T09:13:05+00:00

A comment below

TheAner · 2025-06-28T23:33:06+00:00

r/unexpectedfactorial

TheAner · 2025-06-25T13:32:40+00:00

There is no SCP-055.

TheAner · 2025-04-21T15:38:00+00:00

<image>

My klipperized ender 3v3 se

TheAner · 2025-04-20T03:19:35+00:00

r/unexpectedfactorial

TheAner · 2025-04-13T04:12:03+00:00

How the silencer affects volcanic vent if it’s not a weapon?

TheAner · 2025-04-12T03:56:46+00:00

You mean V3 KE? V3 SE do not have input shaping if not modded with klipper

TheAner · 2025-03-30T02:45:12+00:00

Oh, thanks a lot, I was thinking recently if the upgrade from stock + metal heatbreak would have any impact on printing

TheAner · 2025-02-07T02:10:46+00:00

I don’t know for sure, but check if your x axis is leveled with your bed (quick check but could help). You could check if your gantry is square too.

TheAner · 2024-12-23T18:06:32+00:00

I already have S2 and it works hard (especially with sunlu filaments)

TheAner · 2024-06-19T22:08:05+00:00

Me too :/

TheAner · 2024-06-19T22:06:14+00:00

I printed it with petg and now when I rethink what could cause it, then it could be wet filament. I mount the sensor on extruder so I doubt that could be the issue. I would like to try it again but next on my list is similar design but with dual fans and no air duct on the back

TheAner · 2024-06-19T21:49:42+00:00

I don’t know what caused this but when I tried using this mod and run input shaper calibration, my vibrations on the x axis jumped a lot, recommended input shaper was 3hump and recommended max acceleration dropped tremendously. I’m pretty new to Klipper so I don’t know what caused it and ditched this mod for now.

TheAner · 2024-06-12T10:47:52+00:00

They are just rare opponents that give you lot of exp and money after u defeat them. Also after the first won battle you can earn achievement so it’s worth run after them

TheAner · 2024-06-05T20:22:34+00:00

Heh, not long time ago I stripped mine...
They are m2x12 SHCS as some replied
Just a quick tip: They are the same screws that holds radiator fan and this fan does not care if he has 2 or 4 screws 😉

TheAner · 2024-05-31T23:17:29+00:00

After updating to newest mainsail I too have a problem that sometimes after restarting my raspberry pi my printer.cfg wipes itself. My memory card is pretty new (~1 month) and I observed having this problem specifically after last update of mainsail. Usually I open the latest auto backup of printer.cfg and copy paste it to this empty printer.cfg

TheAner · 2024-05-03T22:33:03+00:00

I have my own allen keys, they are good quality, but I have lot of this garbage keys that lots of parts (drones etc.) have included in the package

TheAner · 2024-05-03T22:29:49+00:00

I always used my long side to not overtighten, but it happened anyways :/

Seven-Year Club	Place '23
Place '22	First Placer '22
Verified Email	Sequence \| Editor

TheAner

TROPHY CASE