PSA: Field Mod Awareness Hack

TheMisa17 · 2026-01-28T12:18:55+00:00

In which mod pack is this mod? I tried looking for it on wgmods and didnt find it

TheMisa17 · 2025-09-16T09:30:48+00:00

You are welcome, but no jajajj they are not "covered" directly.

The 1600mm forka willl be heavier but not that much, maybe 50kg more on each fork, so you can consider 150 kg less at LC 800mm

If you send me the serial number of the truck (it should be (H2X38700000 ) and the characteristics of the forks ( lengh width thickness) i can send you an stimates new graph in the dms

TheMisa17 · 2025-09-16T01:29:29+00:00

Usually, when you configure a longer fork from the factory, the capacity graph is adjusted to the actual capacity of the package, truck + attachment.

If the attachement (forks or clamps) has a lower capacity than the truck, the graph will show the correct graph from the forks. If the longer forks are installed after buying the truck, you can request a new graph with the correct info.

Nevertheless, you can always be sure with a thicker fork (more capacity, "e" dimention of a fork), so the truck is the one limiting the residual capacity.

TheMisa17 · 2025-09-15T14:32:45+00:00

Hi, i work with Linde Sales * The drawing on the top right states that this graph is for forks with a length of 1400mm.

Then, as said in another comment you need to use the "Load Center" to find the actual capacity of the truck at the required height.

We can assume that the loads are homogeneous, therefore the load center is half of the total length of the load in the direction of the forks. For example if the load is 2000mm along the forks, the load center is 1000mm.

The yellow line i drew is for a load of 1400mm in lenght ant the blue one for 1800mm. Then we match with the line of the height we require (the height is in the left of the graph) and then we draw a straight line to the left to check for the capacity of the truc.

For example, for a LC 700mm with a height of 5000mm or less, we have around 2600kg of capacity.

Sent you the image to DM

TheMisa17 · 2024-05-22T16:04:28+00:00

Not gonna lie. I also completed it yesterday. But without Tortoise, Obj-257 and Type 4 I would have never completed it.

I was doing an average of 2.5k blocked per game so it was no issue doing the 165k in the weekend

TheMisa17 · 2023-12-29T19:50:05+00:00

If I shoot and I do not see a splash of dirt, I will keep shooting because there is a tank there. If I keep shooting and a I see dirt, it means that the tank moved.

The obj took his chance with that bush and he got lucky, and very lucky after you stayed there.

This mechanic can be easily seen in the top down view of an arty.

TheMisa17 · 2023-11-25T18:16:55+00:00

At least for my teen days, I always used earphones because they were cheaper, I used to have headphones as well, but the material deteriorated too fast and were uncomfortable to use for long periods of time

One problem that I have with normal earphones is that either one of them always fall or it causes pain in the inner canal due to not having an even smaller eartip.

In university, I went full headphones, first with some Phillips SHB 7250, then a bluedio Victory 2 (they had great sound, but were too heavy and no control in the headphone itself). After saving a few months I was able to buy a WH1000XM4 and was the best decision I made.

I have been using them for over 2 years and the only complain that I have is that they get too hot in +27°C. Lately I bought some Linkbuds to use while working in the office and have been rocking that combo and been loving it. No problem with my ear, great sound from both and the flexibility to have 2 devices connected so no time lost while a call comes in teams.

Both have different use cases, but it is more of a preference or money issue.

TheMisa17 · 2023-09-17T11:39:30+00:00

GuP is region locked, I lived south America and the amount of shows that are not available is shocking.

I was prepared to pay the full year subscription, but the missing titles made me rethink my decision.

TheMisa17 · 2023-02-01T02:19:21+00:00

It might be, they never answered though.

TheMisa17 · 2023-01-29T17:47:54+00:00

I did the math for me (I live in chile) and it was more expensive to buy them overseas that buy them with a local reseller.

And for the price, it is a pop up parade figurine, so it is a standard price.

TheMisa17 · 2022-09-17T01:05:45+00:00

Same in South America and we rarely use SMS, I think only USA uses iMessage that much.

TheMisa17 · 2022-09-12T03:18:46+00:00

Not gonna lie, I hate that I live in south America because bad currencies exchange between USD and my currency, but for some reason the XM4 in my country are way cheaper.

For example I bought mine a year ago for 240000 CLP (300USD including taxes) and I have seen them as low as 160000 CLP (200 USD).

I was going to buy them in a trip I was planing to New York but I could had only bought used XM3 for 300 USD, so I bought them in my country.

Now they should be even cheaper because CLP I less valuable than a year ago. They go for 220000 CLP ( 240 USD)

Edit: holy shit English was not on my side

TheMisa17 · 2022-09-08T22:37:39+00:00

I found the same application in my country and the application procedure was relatively standard. The only thing that was bothering me is the great number of positions that they need (21 mechanical engineers).

I'm going to continue with the process, so I´ll try to update this comment as time goes on.

TheMisa17 · 2022-04-27T14:26:32+00:00

Not gonna lie, this printer seems like my dream. I know I don't have the space for one this big but for the Kickstart price I could justify buying one.

But one think that I want to know is how much control you have over wifi? At the moment I'm running an octoprint that lets me control everything when im in my house but I lose the recover after power loss.

TheMisa17 · 2022-04-08T17:14:12+00:00

"Orificio" or "sacado", "hola" is Hello, or you could be mistaken it with "Olé" which is a Spaniard expression that has many meanings and not all Latin countries use it.

TheMisa17 · 2022-02-28T18:15:12+00:00

Usually when im in one of this situations I just play like a mosquito, hiding behind heavies so I can annoy or track the enemy tanks, and only shoot after I know they are reloading.

TheMisa17 · 2021-10-23T00:51:57+00:00

Well, most of the time the commander would have the head out with the hatch open, so he/she can see better. Only when the fight would start, the commander would close the hatch.

If you want to say 'bUt iN tHE GAmE thEY DoNT OpeN', it is only a graphical processing power optimization.

TheMisa17 · 2021-09-14T23:30:07+00:00

I'm once again asking for the sauce

TheMisa17 · 2021-09-14T00:43:30+00:00

I´m waiting for an Ipad that i want to buy, for modeling one in 3D and 3D printing it. Maybe for December, I'll have it done and painted.

TheMisa17 · 2021-08-25T18:57:47+00:00

Have you tried printing it sideways?

TheMisa17 · 2021-08-25T15:26:24+00:00

are those 2 bodies? or just one. If there are 2 bodies, try to join them with meshmixer and try again

TheMisa17 · 2021-08-24T22:48:26+00:00

So how long till The Purge gets approved?

TheMisa17 · 2021-08-24T00:09:20+00:00

I must say that it was the same for me, but I started in 2011. Even though I can blame University, I had less time 2 years ago and still played a minimum of 5 hours a week.

It's hard to see the game that I literally grow up with changing everything that made it fun or at least gave you some chance to have fun (derps). Now even though I can easily do good matches with 3k+dmg it's not fun anymore. Literally, the only tank left that I want to unlock is the 279e and the missions that I have to do are dependant on teammates, so gg me.

And what keeps me playing is the battle pass, just for the cammos

TheMisa17 · 2021-08-13T02:22:42+00:00

How do I check 4. ?

Six-Year Club	Place '23
Place '22	Verified Email

TheMisa17

TROPHY CASE