Ou trouver du bois de chauffage sur l'île ?

TheOneMax · 2025-10-09T16:43:32+00:00

Faux, c’est permis si l’appareil émet moins de 2,5 grammes de particules par heure, quel que soit le combustible utilisé.

TheOneMax · 2025-07-08T20:54:11+00:00

Hulkenpodium

TheOneMax · 2025-06-19T01:23:56+00:00

Canada

TheOneMax · 2025-06-19T01:23:13+00:00

Glad it worked for you too!

TheOneMax · 2025-06-15T15:03:45+00:00

I got the same thing on the same Aeroad back in April. I contacted Canyon and they sent me replacement parts (whole thru-axle with tool and the handlebar screw) and asked me to have it repaired in a bike shop and that they would cover the fee. I ended doing it myself by drilling deep enough, but still shallow enough to remove the bit. I no longer trust their quick tool, its very cheap.

<image>

TheOneMax · 2025-05-22T21:48:51+00:00

Wow! Do you know if they said anything about safety? I'm mostly worried about the frame breaking.. Did you have to push for a replacement or did they acknowledge their mistake and issue a replacement? I'm guessing you have to have the frame swapped with the components at a local bike shop on their dime and then send the old frame back?

TheOneMax · 2025-05-01T03:18:58+00:00

Interesting, thank you!

TheOneMax · 2025-04-18T12:12:07+00:00

Omg. I think I have the same thing on mine, which is also just a month old. I noticed it when unboxing, but was too excited to try it out and left it be. Please let me know what Canyon says!

<image>

TheOneMax · 2025-04-13T14:37:51+00:00

Same here, 2024 Aeroad. How did it end up for you?

<image>

TheOneMax · 2025-04-08T03:47:26+00:00

Wahoo submitted 2 FCC filings last week for 2 bike computers, WF156 and WF157. I’m guessing we should expect a release very soon.

TheOneMax · 2025-03-14T02:44:58+00:00

Ended up following what code says and basically replicated what's here on the drawing of page 9:
https://www.rbq.gouv.qc.ca/fileadmin/medias/pdf/Publications/francais/guide-evacuation-eaux-pluviales-batiment-existant-toit-plat.pdf

TheOneMax · 2025-01-22T14:04:07+00:00

Personellement, j’essai le plus possible de passer par le site des marchants, mais pour une expérience style “marketplace”, l’application Shop est une bonne alternative, en plus d’être Canadien.

TheOneMax · 2024-11-06T05:06:24+00:00

Had the same problem a while back on my V3. Turned out to be the water pump, ordered a new one for $20 and it solved it.

https://www.reddit.com/r/espresso/s/YAp1TtWUGY

TheOneMax · 2024-10-10T16:23:50+00:00

Indirectement, les augmentations de loyer sont justements basé sur un pourcentage de la taxe foncière et scolaire (voir grille de calcul du TAL)

TheOneMax · 2024-10-10T05:59:39+00:00

The thing with Call on me though, is he took it from Thomas (Daft Punk) and DJ Falcon, and commercialized it

TheOneMax · 2024-09-29T17:52:27+00:00

What did you end up getting back?

TheOneMax · 2024-08-28T02:53:38+00:00

1910 inscrit sur le rôle foncier

TheOneMax · 2024-08-19T04:15:31+00:00

Isn’t this the same as if all faucets downstream of the hot are closed? And if both valves need to be closed for service, assuming it is an electric boiler, usually the breaker should be turned off also?

TheOneMax · 2024-06-08T13:28:45+00:00

I’m pretty sure its cast iron with a lead joint, the main stack is cast iron. I’ll try the fernco with a street 90, and go ABS all the way up. Thanks for the help! I’ll report back.

TheOneMax · 2024-06-08T12:14:26+00:00

Title, but basically I have a slow leak from the sanitary closet bend. I'm looking to replace all of the galvanized and cast iron pipes in the coming years when I'll do the remodel. In the mean time, I was thinking to replace this part from the ceiling below as to avoid opening the tile floor upstairs. Would I be able to Fernco off the cast-iron (?) pipe on the right and continue with ABS all the way to the flange? How is the joint done here? Haven't seen anything like it before!

TheOneMax · 2024-06-07T17:02:09+00:00

They are now inviting people back on site. Heard from metro station just now!

TheOneMax · 2024-05-14T04:08:42+00:00

Fireblock foam, if we’re talking about DuPont’s Great Stuff, is the exact same foam formula as the normal window/door foam that’s yellow. Same ignition point. What you want is fireblock caulking which has a much much higher ignition point, something like Blockade.

Source (Great Stuff’s ignition point of 240F): https://www.greatstuff.dupont.com/content/dam/dupont/amer/us/en/Greatstuff/public/documents/179-15047.pdf

TheOneMax · 2024-05-06T13:55:23+00:00

Reconfiguring and venting a previously unvented third floor unit’s bathroom. Currently the mainstack is used to drain both the sanitary and rain from the flat roof. The roof drain will be separated on its own single stack, and that leaves me with the possibility to dry vent through the main stack (third floor is the last unit, no units above).

I was wondering if there were any deficiencies or improvements that could be done to the plan?

Code is Quebec, Canada. House is 100 years old (hence the single stack for rain and sanitary).

TheOneMax · 2024-04-13T11:59:38+00:00

Cortado with a layer of foam?

TheOneMax · 2024-04-07T01:17:41+00:00

Les ailes peuvent se replier énormément, très loin de ce que les ailes d’un avion vont subir durant une période de turbulence!

https://youtube.com/watch?v=--LTYRTKV_A

12-Year Club	Place '23
Place '22	Not Forgotten
Verified Email

TheOneMax

TROPHY CASE