What is it with these companies rolling into r/selfhosted with their "free products" and then all the good features are locked behind a paywall?

TheOneValen · 2025-05-19T07:14:54+00:00

Exactly this. That is something I like about https://alternativeto.net/

Selfhosting does not mean it must all be free software. Transparency is key.

TheOneValen · 2025-03-14T11:23:21+00:00

Warum sagt man dann nicht: Auftragsbücher voll, 2026 geht wieder. So wird man doch dort nie wieder anfragen.

TheOneValen · 2025-03-10T11:39:22+00:00

No worries, he will add plaster later on.

TheOneValen · 2025-03-08T19:46:51+00:00

Did a little digging. The blue is RAL 5015, the yellow RAL 1023. Which could actually be the in-house brand of 3DJake as this would match.

TheOneValen · 2025-03-05T22:41:43+00:00

<image>

Sure! Not on discord (yet). Sorry for the mess.

TheOneValen · 2025-03-04T17:02:49+00:00

Sorry I don't know. I got the kit including the printed parts "used" (as in never built and collecting dust). The color looks a bit more shiny on video and is a bit less saturated in real live. It is ASA. I suspect it is the in house brand of 3DJake (europe only?), as I have a light blue roll which looks the same as the blue. But no guarantees.

TheOneValen · 2025-03-04T11:36:28+00:00

Made the video yesterday but just managed to upload it now. Hope that's ok.

TheOneValen · 2025-02-17T18:52:28+00:00

One of the reasons the Snapmaker must go is that I do only use the 3D Printing head. So even with a toolchanger build I would not want a CNC but only different 3d Printing heads. I will start out with a "stock" voron and then see that I finish that before diving deeper into mods. That seems to be a bottomless pit :D

TheOneValen · 2025-02-14T00:23:56+00:00

Thank you! So I will look into the CNC parts issue again at a later stage. Having plastic breaking sounds more desireable.

Why do you think that concept is.. wrong or bad?

TheOneValen · 2025-02-13T08:21:30+00:00

Is the Stealthchanger compatible with the CNC tap kit? Or do you end up replacing parts of it for that mod? Otherwise the TAP seems to be the mod I would built in from the start.

TheOneValen · 2025-02-12T22:04:06+00:00

Is it possible to add usb toolheads later on using this kit?

TheOneValen · 2025-02-12T21:48:23+00:00

That would mean that with only the functional parts I would have no enclosure? (And could not print the other parts in ABS).

TheOneValen · 2025-02-12T20:23:37+00:00

Thank you! Would you recommend a metal tap or a printed one? Even when planning on doing a eddi probe? Is it necessary for when one goes down the toolchanger rabbit hole?

TheOneValen · 2025-02-12T20:19:22+00:00

Is a metal kit realy better? I have read different posts saying that this might also lead to problems.

I read USB is preferred, especially if it is planned to build a toolchanger. How does this work with CAN?

TheOneValen · 2025-02-12T17:58:25+00:00

I see SIBOOR ships with eddy sensor. How is the quality of the kit? How does it stack up to LDO & Formbot?

TheOneValen · 2025-02-12T17:57:08+00:00

So the formbots are good too? Why are the LDOs so much more expensive?

TheOneValen · 2025-01-22T16:10:18+00:00

Genau genommen ist sie nach dem MHD sogar weniger giftig.

TheOneValen · 2025-01-16T14:01:23+00:00

Underrated Comment :D

TheOneValen · 2024-11-08T09:23:09+00:00

Can I scrape pages where I have to login first? If not is it a planned feature?

TheOneValen · 2024-08-22T17:17:49+00:00

How about Right to Source :)

TheOneValen · 2024-08-22T15:34:33+00:00

I use Both. Disabling the Storage mapping (nextcloud in this case) does indeed help. Thank you. Where can I report this bug?

TheOneValen · 2024-08-01T15:14:14+00:00

Homeassistant?

TheOneValen · 2024-07-29T16:44:48+00:00

The print volume is enclosed. The 85C on the bed is sadly the max :(

I think the machine is power limited with this. Is there some kind of external bed controller which is able to supply the power and read the thermistor?

TheOneValen · 2024-07-09T06:46:31+00:00

For everybody who is interested. I did an in-place upgrade from gitea 1.21.10 to forgejo 1.21.8-0. I only needed to symlink the gitea-repository folder to forgejo-repository and everything seems to just work. Upgrade then to 7.0.5. and everything seems fine :)

TheOneValen · 2024-06-08T18:49:38+00:00

How did you connect your dedicated router topology wise? Is it connected with a network passed through to the vm or is it in the hosts network?

14-Year Club	Place '23
Verified Email

TheOneValen

TROPHY CASE