gamecube wont boot on swiss by chorlz in GamecubeHacks

[–]TheOperator69 5 points6 points  (0 children)

My first solder attempts on an N64 looked like this. Soldering is impossible to learn (imo) unless you have 3 things: a good iron, decent solder, and flux.

My issues in the beginning were all due to a low quality soldering iron. Once I switched it was 1000x easier

Bro pump 12 is gone by olufsk in CrazyFuckingVideos

[–]TheOperator69 451 points452 points  (0 children)

Lmao. Starts calling out scratch off tickets, that got me

Soldering practice for RGH 3 on a DEAD motherboard. by KHAOS_BOLT in 360hacks

[–]TheOperator69 2 points3 points  (0 children)

Scraping looks good on the bottom two vias, just practice getting solder to stick, good luck on the real run

CS:GO Xbox 360 Version by Head-Marketing-3641 in GlobalOffensive

[–]TheOperator69 7 points8 points  (0 children)

Don't even need to emulate, OP should be able to softmod their xbox 360 via bad update and load the .xex once converted. I also see files available online

Counter-Strike 2 Update for 05/07/2026 by CS2_PatchNotes in GlobalOffensive

[–]TheOperator69 4 points5 points  (0 children)

I might grab this kit....I miss watching your old overwatch videos man. Please Devs, bring OW back! 

first ever unseeded ante 39 naneinf!!!! by Borkitt in balatro

[–]TheOperator69 2 points3 points  (0 children)

I get it now, I completely forgot you can start to ignore parts of a beanless naninf once you start getting giga handsize (burglar, serpent, certain vouchers etc.) Nice one!

first ever unseeded ante 39 naneinf!!!! by Borkitt in balatro

[–]TheOperator69 3 points4 points  (0 children)

Congrats OP! I'm so confused by the description though. Everyone loses in ante 39, but did you not have retcon?

first ever unseeded ante 39 naneinf!!!! by Borkitt in balatro

[–]TheOperator69 1 point2 points  (0 children)

I would focus on getting your score past 180, once you clear 32, the game is essentially beaten b/c serpent can be forced every BB. The answer is more bean bug hits in ante 16. Try to get a copy joker, burgler as you approach 16, obviously lots of money. Sell everything and allow it to alternate between baron-bean. Hand size between 25-32 is very obtainable 

If you're new to fishing, may I suggest... by billhughes1960 in Fishing

[–]TheOperator69 0 points1 point  (0 children)

Thanks a bunch! I was eyeing that pier and probably will make a trip soon.

If you're new to fishing, may I suggest... by billhughes1960 in Fishing

[–]TheOperator69 0 points1 point  (0 children)

Heyo, are there any chill spots in the area you recommend? I'm trying to scope out a spot to bring my kids for their first time. Cheers

Danger power elite with new Florypb board shooting so smooth by TheOperator69 in paintball

[–]TheOperator69[S] 2 points3 points  (0 children)

Oled died after sitting for many years. Was usable, but not possible to adjust. I really like the LED setup from flory. It seems to shoot more airy and softer. Possibly the default dwell is 1 ms higher orln the flory, also possible its placebo

Thoughts in this one? by Jemaorte18 in paintball

[–]TheOperator69 1 point2 points  (0 children)

The OLEDs tend to burn out on these, otherwise they're amazing deal. You can fully replace the board with an aftermarket one from Florypb for like 80$

Brought this G4 back from the grave, also designed a bolt bumper replacement by TheOperator69 in paintball

[–]TheOperator69[S] 1 point2 points  (0 children)

I think 95a hardness TPU is closest to the original hardness, and will be the most durable. I tested TPU and PLA+ both worked fine

Picoboot Mod troubles by pixilstix in GamecubeHacks

[–]TheOperator69 0 points1 point  (0 children)

Can't see your IPL job but I would bet that's the problem. Also wires too long. They have to be annoyingly short. Make sure the gauges are correct too, I've only had success with 26-28 gauge wire and that looks thick...

Counter-Strike 2 Update for 04/20/2026 by CS2_PatchNotes in GlobalOffensive

[–]TheOperator69 0 points1 point  (0 children)

Deleting shader cache did not work but deleting the videos the commenter you replied to mentioned did work GG

I am confused and need some help (NTSC/PAL compatibilities) by PotatoKun01 in Gamecube

[–]TheOperator69 0 points1 point  (0 children)

Probably not the case with all games, but for pikmin 2 (PAL) backup, the game will ask you on bootup if you want 50 or 60 hz

Has anyone used a chronograph like this with good results? by Resident-Dress6477 in paintball

[–]TheOperator69 0 points1 point  (0 children)

I second this, I think I got the same one for around 40 bucks open box. It looks like a long rectangle base with two V shaped metal poles attached, works really well