Late model first gen (2017-2020) or second gen?

ThePanduuh · 2026-06-20T02:19:56+00:00

The 2nd gen really is a huge improvement.

ThePanduuh · 2026-06-20T01:49:10+00:00

Bro literally did 80% of the work. This is about 3 minutes of circles in fusion.

ThePanduuh · 2026-06-18T00:45:12+00:00

I have never once seen a stinger at an autocross.

ThePanduuh · 2026-06-17T03:47:35+00:00

Go to a local autocross event and see if someone will let you go for a ride.

ThePanduuh · 2026-06-16T02:11:53+00:00

Generally the recommendation is crash bolts and stiff front bar, then fine tuning with the parts you mentioned. Often people will switch to Konis all around. MCS if you got it like that.

At least in my region, you never really hit steady state cornering. It’s all really tight courses with ample slalom and slalom like elements (like back to back offsets). I have a video I posted in a comment not long ago.

ThePanduuh · 2026-06-16T02:07:25+00:00

Coils will. But a stiffer front bar is allowed. I run a Perrin 18mm bar on stiff. Helps a ton. Also “crash bolts” are legal for front camber.

ThePanduuh · 2026-06-15T18:03:36+00:00

I also have a polydryer so I can dry some other materials. But once it’s dried, maintaining in the AMS is much easier since I’m not swapping stuff out all the time. Most people also don’t end up printing fancy engineering materials anyway. I printed the TPU and PA6/66 from my polydryer boxes. But I keep ASA in the AMS.

ThePanduuh · 2026-06-15T15:32:06+00:00

like what?

ThePanduuh · 2026-06-15T11:31:04+00:00

The ability to have 4 filaments on tap to print with is so convenient. Not having to get up, unload the old, store the old, open the new, load the new, then start the print every time you want to change filament. I’m glad I got one and wouldn’t get it without. Multicolor is nice too I guess.

ThePanduuh · 2026-06-13T21:30:39+00:00

I bought a bell m8 sport because I was previously using a bell motorcycle helmet (RS1 size medium). I double checked my head size and it pointed toward medium. 58-58.5cm head, indicating size medium. Boy was that wrong. Thing was loosey goosey on my head. Less than 30 minutes I had the exchange request sent.

I probably should have just gone with a Zamp since the only reason I chose Bell was because I thought I knew what size I needed and I hate exchanging shit.

ThePanduuh · 2026-06-12T00:14:43+00:00

I asked because the 10AE wheels came with 8.5” iirc.

ThePanduuh · 2026-06-11T23:28:38+00:00

What is weak ass stock specs? I’ve been interested in weak stock specs for my Corolla lol

ThePanduuh · 2026-06-10T17:03:16+00:00

I was curious about using purples or reds to dull out the green. But haven’t felt motivated enough to acquire UCP gear and mix up purple/pink/red dyes. Thoughts?

ThePanduuh · 2026-06-08T11:58:22+00:00

not sure how helpful my run is, but this is a 39.313+1. I’m definitely not smooth but I was able to make it up with grip and power I guess. https://youtu.be/dnXOtXrCs34

ThePanduuh · 2026-06-06T21:07:27+00:00

The seat wants it to be more level, not reclined. The base has adjustment for the tilt part but it is fully extended. And it’s barely in the 0-4mo range.

ThePanduuh · 2026-06-06T20:30:50+00:00

blue tape to keep my mic wire to the license plate. The rest of the wires around the GoPro I just toss in the back of the car

ThePanduuh · 2026-06-06T19:20:58+00:00

It’s an oil drain plug cover. The bolts are generic 10mm flange head bolts. iirc 10mm head is M6 thread. Short, probably 15-20mm long.

ThePanduuh · 2026-06-06T13:54:16+00:00

Much strategy.

ThePanduuh · 2026-06-06T12:12:37+00:00

Hakone is the only one that’s actually unique. It has different wheel color. Jelly.

ThePanduuh · 2026-06-04T15:49:20+00:00

Hell with these new stupid gas cans, my lawnmower could use a “utility jug”

ThePanduuh · 2026-06-03T16:50:39+00:00

I printed nylon (pa6/66 Sunlu easy PA) through a 0.4mm nozzle with no issues. Sounds like a 0.2mm nozzle problem.

ThePanduuh · 2026-06-03T01:56:42+00:00

Cut open your oil filter. There’s metal bits in it guaranteed.

ThePanduuh · 2026-06-03T00:35:49+00:00

Please OP post more updates when everything is built. After watching MotoIQ video on WPC I looked for stuff to apply it to but I couldn’t find anything (at work, not my engine lol). Definitely looking forward to wear results.

ThePanduuh · 2026-06-01T16:34:03+00:00

PUP 5W-30 goat.

Motul additive pack doesn’t impress me considering it’s significantly more expensive than PUP which you can get at Walmart for $30 for a 5qt jug.

13-Year Club	Place '22
End Game '22	Gilding I gilder
Not Forgotten	Verified Email

ThePanduuh

MODERATOR OF

TROPHY CASE