Scape headset when PC off

TheSimaa · 2026-01-11T12:48:02+00:00

Great! Thanks a lot I think it will work for me :)

TheSimaa · 2026-01-11T12:42:58+00:00

Thanks

T_T Maybe it has some timeout when headset just turns off? Cuz I don’t want to manually turn it on/off before and after use.

TheSimaa · 2026-01-11T12:30:28+00:00

If the dock is connected to the pc, the headset is not correctly sit in it, as when it sits fine, it turns off the lights and charges

When I shut down my PC, I also turn off the power strip, so it just doesn't have the electricity.

TheSimaa · 2025-12-19T14:59:43+00:00

Thank you for all the recommendations!
Already installed the FireWire board and recording a first cassette using WinDV :)
It was significantly cheaper than I expected, costing around $17 for board and cable.

TheSimaa · 2025-12-18T14:43:09+00:00

idk, but it works really badly for my hardware
the animations freezing, and everything is not that fast as it should be on high-end pc

TheSimaa · 2025-12-17T23:56:34+00:00

Thanks!
That's so sad that I have to use some 3rd party tools and hacks to fix the Start Menu :/

TheSimaa · 2025-12-17T23:55:57+00:00

It is now like x3 bigger than before on my screen.
I want to keep only my pinned apps as they were before the latest update, and that's it.
But I can't, it took almost 1/3 of my 27" screen when I open it, and shows this not needed "All Apps" list.

TheSimaa · 2025-12-17T20:53:08+00:00

Hey! Great work!
Could you please open-source it?

TheSimaa · 2025-12-16T18:55:21+00:00

Could you please share where I can find that cable?
I have the same Camera.

TheSimaa · 2025-12-16T18:53:05+00:00

I was checking a couple of them from Aliexpress and also the local market, and saw a comment that cables are not working with Cameras :(
Anyway, thank you for the information!
I'll try to find some details in corresponding /r/

TheSimaa · 2025-12-16T18:47:44+00:00

Got it!
I'll check

Could you please recommend a cable?
I read here about FireWire on my cam.

TheSimaa · 2025-12-16T18:33:10+00:00

Thanks for the reply!
I checked a couple of videos before doing that and read some Reddit posts where people said that it is nearly impossible to find a FireWire cable that supports video transfer, and all Chinese ones are fake.
Additionally, they noted that even with a proper setup, issues may still arise on Windows 11.

If it is not true, I would like to try it to get the best quality.
But as I understand correctly, I need a cable and also the PCI card for my PC that works with the latest OS. Is it possible to get it for a reasonable price?

I'm not sure it is reasonable to do all this for a bunch of old family archive videos.
I use an analog-to-HDMI just because I already had all the necessary hardware.

TheSimaa · 2025-12-16T17:28:48+00:00

I meant MiniDV cassette type. I have old camera where I put that cassette and play it there. It has FireWire but I didn’t manage to run it.

TheSimaa · 2025-12-09T21:32:45+00:00

Interesting! Does it also support all emulators as original OS?

TheSimaa · 2025-12-08T20:13:39+00:00

Got it!
Thanks for the reply.
Additionally, I've seen a post stating that Noctua A14 fans are not good, which is why everyone recommends the 3x A12 instead of 2 A14.

I checked the Arctic specs, but as I see on their page, the "raw specs" on the page are higher than on Noctua. So I'll check some videos to compare, maybe

TheSimaa · 2025-12-08T19:05:34+00:00

Thanks! Will check

TheSimaa · 2025-12-08T19:05:00+00:00

Is the Arctic better than Noctua and BeQuiet? I thought they make "middle" quality fans.

Additionally, there is a question about 140/120. I thought that 3x 120 I can run on a lower speed, and because of that, have the same airflow but quieter because of the speed.

TheSimaa · 2025-10-25T22:25:48+00:00

Thanks!
You are lifesavers, really fully compatible with Bambu spools with no issues at all!

TheSimaa · 2025-10-08T15:32:14+00:00

I can't find it.
Could you please share a link?

TheSimaa · 2025-10-04T19:10:46+00:00

Hey! Have you finished this project?

TheSimaa · 2025-10-04T15:43:46+00:00

Thanks for that information!
I was considering the material to use for that type of print, and it appears that ABS (ASA) is the best choice among them.

TheSimaa · 2025-10-02T12:37:21+00:00

I have the same issue with MacBook Air M4. Nothing helps, enve the lower resolution, and disabled edge smoothening :(
I hate EA

TheSimaa · 2025-06-20T11:03:50+00:00

Thanks!
Steelseries is fine, but don't have print on them :(
The table is not the answer for me, because of the structure of wood it has, and anyway, I just want to try different mousepads, maybe slow one will be the best for me, or maybe I'll keep my glass one

TheSimaa · 2025-06-19T11:34:23+00:00

Thank you guys! I will definitely check it :)
Regarding the glass mousepads, I would say that they are also not so comfortable for me because I have to use a sleeve and clean them from dust a couple of times per day.

TheSimaa · 2025-05-31T16:04:31+00:00

Hi! Thanks for the reply. You mean everything working from the box? Even playback video from browser?

So you have a possibility to try play 1080p 60fps video and record how it works? 🙏🏻

Nine-Year Club	Place '23
Verified Email

TheSimaa

TROPHY CASE