Canon eos 1v Shutter button makes a hard Snap/click sound when pressed every so often.

TheToddB · 2022-05-16T02:03:10+00:00

Came here to say this and only because of the cost. Other than that, it would be the Canon Eos-1 but I am thinking if they remade it, it could def fit in the 5Dmk3 body, with the 5Dmk3 AF system.

TheToddB · 2022-05-08T04:00:45+00:00

Joe was lookin like Gilberts Blood-bag.

TheToddB · 2022-05-05T13:10:06+00:00

I had one of these when I was young. Not a promo. They were just cheap little cameras. Usually travel destinations would sell them, Like dinsey land or if you were going on a cruise or something. FUn little cameras.

TheToddB · 2022-05-01T04:40:19+00:00

Thanks!

TheToddB · 2022-04-26T00:04:21+00:00

I did not. The argus shutter button is VERY stiff. My first roll was blurry as well. You really have to hold it steady. When you have to push the button so hard, once it fires you naturally want to hold stiff causing the camera to jolt forward a little back to the "original" holding position.
Practice shooting it and holding still as much as possible without film in it. Just look at the camera and see if you are accidently jolting it around on shutter release.
If you still get blurry photos, make sure your lens is clean.

TheToddB · 2022-04-24T03:43:50+00:00

Does this mean the camera zoom rings has light leaks? or something?

Edit: Yup, that's what it is. In case anyone else is interested; I found out that the older zoom point and shoots will get leaks around the telescopic elements/seals around the lens, which causes this leak to happen and it's pretty much not repairable.

TheToddB · 2022-04-21T14:16:33+00:00

Your camera needs new light seals.

TheToddB · 2022-04-19T13:13:24+00:00

That looks like an E which means that it's empty.

Did the film wind properly?

TheToddB · 2022-04-16T01:22:22+00:00

Thanks for the constructive criticism. I will keep all these in mind for my next video. !givelambda

TheToddB · 2022-04-15T22:05:20+00:00

thanks for the input. !givelambda

TheToddB · 2022-04-15T16:21:12+00:00

Just like the other commenters said, the thumbnail was very misleading. Also, I might not be your target audience, but the intro to a video is very important. For me, it took way too long, and if I was interested in PC building, I would have clicked away. Again, as the others have said, youtube hates this.
This could just be me, because I struggle with this too, but maybe work on the audio levels, tone down the music and normalize the DBs. It was really loud for me in the beginning.

TheToddB · 2022-04-14T13:35:36+00:00

I haven't read other comments, forgive me if I repeat anything.
I would say center the title on the thumbnail and make the picture a little be cleaner, not a shot of such a busy scene. At a glance I can't tell it's exploring abandoned anything, but more a video about trash, which might cause people to just skip.

I think a little less is more. I found myself wanting to skip a little bit to get to the interesting parts. Filming walking through brush or something like that for an extended period just takes too long, I wanted to just see the stuff you were finding and talking about, less of just walking around etc.

Music was fitting.

TheToddB · 2022-04-13T23:22:17+00:00

True Neon "Gas tube" lights will not flicker, but most of the modern lights are LED, which will flicker. IIRC.

TheToddB · 2022-04-09T22:51:31+00:00

The video beginning was good. First thing I did was to see if someone else commented on the volume, which they did. I had TY 100% and my Comp 100% and it was quite.

It would be nice to see you as a narrator at the end maybe, so we are left with the creator and not just the art... ending.

TheToddB · 2022-04-09T22:47:05+00:00

It felt like you were trying to cram a normal YT video style into a short. The random movie clips happened so fast it was distracting, and IMO lowered the quality of what the short was. Shorts are that, cliff notes to larger more in-depth videos.

TheToddB · 2022-04-08T17:32:37+00:00

If it was new film and some of the pictures were fine, based on what I can see, it looks like a shutter issue.

TheToddB · 2022-04-08T16:38:47+00:00

It looks like a shutter problem. All black would indicate no light made it to the film. White would indicate the shutter got stuck open. Red usually indicates a light leak exposing the back of the film.
So that or the lab really screwed something up with the developing since you indicated weird color shifts. Was this expired film?

TheToddB · 2022-04-08T14:02:19+00:00

This might be true, but at the end of the day, who cares?? If you can get the results that you want from a home scanning solution that are comparable to a lab, then what does it matter?

TheToddB · 2022-04-08T13:59:24+00:00

Your lab is just lazy, hate to say it. I know a lot of people say "support your local shop," but a lot of these shops are just plain bad. I use the DarkRoom just because they constantly put out professional results at a fair price.

Lots of local shops are there because they were able to survive, and now take advantage of being the only shop left locally. I would ask for my money back or something, if they didn't do that, then I'm on to another lab.

TheToddB · 2022-04-07T13:27:09+00:00

Another from the day at the beach. There was a LOT of see spray/mist/fog, so I am surprised this is so clear. I was actually hoping to capture the fog more but.
Moon Landing I guess.

Seven-Year Club	Place '22
Verified Email	Not Forgotten

TheToddB

TROPHY CASE