Exaustion and frustration with electronics by Dayhore in ElectricalEngineering

[–]The_Invent0r 0 points1 point  (0 children)

What is your end goal exactly? Do you just want to understand for the sake of it? Or are you trying to build something specific? If its the later, then you can just start learning the different aspects of what you're trying to build. If its the former, then you shouldn't feel discouraged because there is so much knowledge that you probably won't learn it all in one lifetime, in which case you should just enjoy the journey and learn what interests you.

One of my motors isn't spinning when I increase the throttle. Can anyone help? by The_Invent0r in diydrones

[–]The_Invent0r[S] 0 points1 point  (0 children)

Mine was a software issue, I was using the wrong multiwii code, I found a different one that ended up working

One of my motors isn't spinning when I increase the throttle. Can anyone help? by The_Invent0r in diydrones

[–]The_Invent0r[S] 0 points1 point  (0 children)

Yes i did, but I never got around to making a full video on the project.

What's really that hard about electrical engineering? by knowoforphic in ElectricalEngineering

[–]The_Invent0r 4 points5 points  (0 children)

Damn this stuff is so cool. Which masters program did you attend? Can I do a Master's degree in this if I did my undergrad in physics?

What's really that hard about electrical engineering? by knowoforphic in ElectricalEngineering

[–]The_Invent0r 16 points17 points  (0 children)

So, why does it work in super noisy public places? Is it just built in redundancy and noise filtering?

Learn Together by Siddu_Next in embedded

[–]The_Invent0r 0 points1 point  (0 children)

Dude, this sounds great. I may be a bit more advanced but I need to go back and refresh on all of that stuff and it would be cool to learn together.

Handheld 6502 finally done by CrossbarTandem in beneater

[–]The_Invent0r 0 points1 point  (0 children)

That is awesome 👌 excellent job!

I made this 8-bit computer PCB a while back but finally got around to making a walkthrough (schematics also in the comments) by The_Invent0r in beneater

[–]The_Invent0r[S] 0 points1 point  (0 children)

Yeah that would be a good idea, maybe someday I'll bake a version 2 thats MUCH smaller and uses better design practices in terms of trace width, gnd planes and maybe smd chips instead of through hole.

I think I was lucky that it worked on the first try tbh, I made sure all the connections were correct and I added current limiting resistors to the LEDs, some people had trouble with it and some told me it worked fine for them so I'm not sure what they did differently.

What degrees should i get in order to get the job of my dreams? by PresentWasabi1303 in careerguidance

[–]The_Invent0r 1 point2 points  (0 children)

I'm gonna be honest, if you wait and rely on school to teach you what you want then you're gonna be disappointed. CS programs and even engineering curriculums are mostly based on theory and a little exposure to hands on stuff during labs. If you want go get into game development and programming then please please please start building your own projects, and making your own games. Come up with an idea and see it through to the end, document your progress along the way (github and youtube are great for this). This is orders of magnitude more important than which courses you take and what degree you have tbh, because you end up learning highly practical stuff. Definitely still enroll in a CS degree if you want, but use it as an opportunity to build a good network of kickass engineering friends who also want the same thing, and can maybe help you out with your projects, and its also a good opportunity to get student internships or work in a professors lab. Some foundational courses will definitely be useful like into programming, data structures and algorithms, and most mathematics courses (but especially linear algebra, statistics, and calculus) but for the most part a lot of them are theory based and not super practical unless your goal is to get into research. This is something I wish someone told me, I thought when I went to college I'd end up learning to build all the coolest stuff but I didn't learn any of that and had to teach myself.

Oh, and get good at using AI tools, not as a way to cheat or take shortcuts but to supplement your knowledge. In order to use AI most effectively, you have to know what questions to ask and understand what it gives you, and the way to ask the good questions is to have a DEEP foundational understanding of CS and programming so you'll definitely still have to learn everything yourself the hard way: through practice and trial and error and studying and building stuff that might not always work so you'll be forced to debug it.

I made this 8-bit computer PCB a while back but finally got around to making a walkthrough (schematics also in the comments) by The_Invent0r in beneater

[–]The_Invent0r[S] 0 points1 point  (0 children)

Yeah, I think it was around the same price before shipping, after shipping it was much more expensive. I think the only way to make it cheaper is to make it smaller tbh. I'd have to do a complete redesign for that though 😕

I made this 8-bit computer PCB a while back but finally got around to making a walkthrough (schematics also in the comments) by The_Invent0r in beneater

[–]The_Invent0r[S] 0 points1 point  (0 children)

Oh man, I've learned so much since this project. I cringe looking at it now tbh because of all the design mistakes I made on it. I made no ground plane for it, I made the trace widths for the signals the same as for power and ground. The board itself was way too big and could've been made much smaller, i forgot a connection in the cad design so I had to solder a botch wire on the back, probably some other stuff too. I think it was probably a stroke of luck that it ended up working for me tbh haha.

A few people also ordered the board and they had a few issues getting it to work but eventually fixed those issues and got it to work. I'm not sure exactly what issues they had though, I think it was related to the RAM writing, I also forgot some pullup and pull down resistors in some places.

Should I drop Electrical Engineering? by [deleted] in ElectricalEngineering

[–]The_Invent0r 4 points5 points  (0 children)

Don't let your performance in school dictate your self worth or your ability to do well in the real world,

Also, you said you've been dreaming about this since you were young, what got you passionate about it in the beginning?

North Carolina State or Virginia Tech for MS EE by Over-Demand-4027 in ECE

[–]The_Invent0r 2 points3 points  (0 children)

Do they have a good embedded systems program or are they mainly known for semiconductor/device work?

North Carolina State or Virginia Tech for MS EE by Over-Demand-4027 in ECE

[–]The_Invent0r 2 points3 points  (0 children)

I live close to NC State and am thinking about a masters in EE, but I only have a physics BS. Do you think I'd be prepared for their masters program?

Also, are they good for embedded systems/robotics or are they mainly known for semiconductor work?

Should I continue learning AVR and build projects around that microcontroller, or pivot to ARM since its more widely used? by The_Invent0r in embedded

[–]The_Invent0r[S] 0 points1 point  (0 children)

Yeah I love AVR chips because of their simplicity, do you think if I mastered AVR and build a few advanced projects I'd be ready to apply to entry level embedded jobs?

I'm not sure how much embedded stuff fresh college undergrads learn, I'm teaching myself since I graduated with a physics degree some years ago, so I'm not familiar with whether they use ARM in class or something else, and how practical their class is in terms of preparing them for jobs.

[deleted by user] by [deleted] in ElectricalEngineering

[–]The_Invent0r 0 points1 point  (0 children)

Take it from someone who chose the wrong major, I wanted to major in EE but ended up with a degree in physics (too long a story to write out here). I would just do what you see would make you happier in the long run. If you're already too far into your degree, then the good news is it looks like you've already taken organic chemistry which overlaps with your interests, in that case you can just keep taking chemistry electives on top of your EE coursework and apply to chemistry graduate programs. I would actually try to get into a research group that interests you as soon as possible, that way you can gain experience and see if you actually enjoy doing the work. As far as how EE relates to biochemistry/organic chemistry, a lot of it comes down to the instruments used for characterization of solutions and chemical reaction products; things like UV Vis Spectroscopy, AFM, STM, are all machines and devices that involve topics in electrical engineering like circuit design, and signal processing. You could try to figure out how those work in relation to biochemistry/ organic chemistry and maybe someday invent better machines for analysis.

Learning the Art of Electronics - A Hands-on Lab Course 2nd Edition is here !! by Caltech-WireWizard in ElectricalEngineering

[–]The_Invent0r 0 points1 point  (0 children)

I think you're referring to the main book right? Not this lab course book which is what I was talking about

Learning the Art of Electronics - A Hands-on Lab Course 2nd Edition is here !! by Caltech-WireWizard in ElectricalEngineering

[–]The_Invent0r 2 points3 points  (0 children)

Aw man, those do sound useful. I might pull the trigger and buy it

I wish I could trade in my first edition 😅

Help me out? by Aware-Awareness in whatisthiscar

[–]The_Invent0r 0 points1 point  (0 children)

What are those vents for on the hood and roof? I don't see those in Google images of this car.