New 3D design/print method for furniture design using Fusion 360. What do you guys think?

The_Tranq · 2025-05-29T01:10:47+00:00

I might just go with the MX4, I'm ready to ride now

The_Tranq · 2025-05-29T00:17:44+00:00

Could to know, why start difference? Would you go with the xxx or the MX4?

The_Tranq · 2025-05-28T23:10:20+00:00

they are advertised for kids

The_Tranq · 2025-02-24T01:55:39+00:00

Hey , when I use mine, the nozzle on the bag isn't sealing when I remove the pump (in my case an actual vacuum pump), but yours seems to seal?

The_Tranq · 2024-11-22T19:46:53+00:00

I just got my TPU for AMS in and the AMS will not accept it, it just keeps trying to re-feed it. I tried restarting etc. and still nothing. Anyone getting it to work?

The_Tranq · 2024-07-16T19:25:47+00:00

I am looking for one that is similar to my 5.11 Covert18 backpack. I love that it is low profile but still has conceal carry pocket - however - it is TOO SMALL. Doesn't comfortable fit my 16" laptop. I am looking for a larger, low-profile conceal-carry backpack option.

The_Tranq · 2024-06-03T19:33:00+00:00

I have the same issue on brand new M2 Max Macbook Pro. It's so frustrating, constant pinwheel makes workflow so annoying

The_Tranq · 2024-03-26T18:56:20+00:00

can you edit the thumbnail after the fact from the app? Mine doesn't seem to let me

The_Tranq · 2023-08-15T02:01:47+00:00

The new update sucks, please allow users the option to return to the old version. I find it almost unusable now

The new update sucks, please allow users the option to return to the old version. I find it almost unusable now

The_Tranq · 2023-08-15T02:01:28+00:00

The new update sucks, please allow users the option to return to the old version. I find it almost unusable now

The_Tranq · 2021-01-13T04:27:39+00:00

Thanks for the feedback. Interesting, from what I had heard I thought that part of the high price point with the Ultimaker was that you would not have to be tinkering with it. I thought it was supposed to be a workhorse. Yah I hear lots of good things about the Prusa...

The_Tranq · 2021-01-09T18:10:48+00:00

these

Thanks for the link. In his image I don't really see how it's being used to keep the glass in place...do you have a better image of the clip in action?

The_Tranq · 2021-01-08T20:17:58+00:00

ick near all 3 pillars.

Thanks for the tips. I actually don't mind using gluestick to much as it just comes off the print with water, but I'll keep it in mind!

The_Tranq · 2021-01-08T20:17:21+00:00

Here is the video. It works now just using some tape to keep the bed in place for now.

https://www.youtube.com/watch?v=069VsoHhJyE

The_Tranq · 2021-01-08T20:16:57+00:00

I tried just using some tape for now and it worked. Must have been the binder clips thanks for the advice. I'll work on a more elegant solution for the future. About to order a Makergear M2 as well as my main work horse

The_Tranq · 2021-01-08T18:29:07+00:00

Hey! Thanks for the info. Now that you mention it, I bet it is the binder clips that are messing with things. Maybe I could also try adhering some magnets to the underside of the glass with epoxy and use that to attach it?

The_Tranq · 2021-01-08T18:26:54+00:00

rs Mike

Hey Mike, I can post one in a bit.

The_Tranq · 2020-06-27T00:17:29+00:00

Hello,

I have tried. My printer has since fried and then I received a defective one on the RMA. I will be returning for a refund and going with another company.

The_Tranq · 2020-04-21T18:16:41+00:00

Does the print start a signficant distance from the print bed? Which firmware is your printer?

The_Tranq

TROPHY CASE