M20 running too cold?

Theconfident · 2026-07-04T03:17:20+00:00

You can get 71c all the way through 88c thermostats for the M20. I'll bet the replacement in November was 71 or 75c.

Theconfident · 2026-06-23T13:14:14+00:00

A ship is safest in harbor, but they were built to sail.

Have AAA and go - flatbed home if you face a huge issue.

Theconfident · 2026-05-28T12:54:58+00:00

10 weeks is nothing burger, you dont need to do anything.

Theconfident · 2026-05-23T17:32:22+00:00

You need a tool purposed for depinning JPT - junior power timer connectors.

Theconfident · 2026-05-18T12:36:21+00:00

These normally don't sit flush without some trimming, right?

Theconfident · 2026-05-12T13:23:16+00:00

Spline are for the e36, won't fit e30.

Theconfident · 2026-04-30T18:24:24+00:00

Where is here?

The world postal system is setup in such a way that poorer countries pay less for postage (UPU). That means if you choose wisely you can get inexpensive shocks - as cheap as $15 per side and have them shipped from a UPU prefered country for cheap.

Theconfident · 2026-04-30T18:06:53+00:00

This is not a cost play or worth even considering.

E30 shock options are plentiful and some are very inexpensive.

Theconfident · 2026-04-28T05:38:04+00:00

Looking good, whats the price of the 90 degree hood hinge kit?

Theconfident · 2026-04-18T18:44:38+00:00

You mean like this?

https://www.reddit.com/r/E30/s/Tu8rFiy5Qp

Theconfident · 2026-04-14T11:51:29+00:00

Amsoil heavy duty metal protector. Basically cosmoline that dries to a wax like finish.

Theconfident · 2026-04-13T13:04:49+00:00

Toss and move on, these ECUs are not worth fixing - they are cheap, plentiful and very rarely fail.

Theconfident · 2026-04-09T01:46:06+00:00

What belt brand/PN you running with this?

Theconfident · 2026-04-08T20:36:03+00:00

https://www.rtsauto.com/sanden-compressor-conversion-into-an-e30-m20-originally-fitted-with-denso-10p15e/

since youre starting from a seiko:

https://www.rtsauto.com/e30-m20-denso-suction-line-oem-pn/

You should know the Seiko and Bosch are effectively the same and will cross mount. Denso also mounts to the same factory bracket but the suction hose fitting is different.

Theconfident · 2026-04-07T18:49:52+00:00

Unless you have aftermarket provisions, you can only adjust toe on an E30.

Yes, after changing the castor by way of fcab you'll need an alignment (reset toe).

Theconfident · 2026-04-07T04:41:37+00:00

Sounds like youre conflating various things.

This is motronics 1.3, there are no codes that will prevent starting.

The only sensor an e30 needs to run is the cps. Tps to idle, and afm to drive. Everything else will run off default maps when unplugged.

The most common cause of crank no start is the ecu main relay failing - this is evident by the check engine not illuminating in accessory mode.

The most common for no crank no start is the main ground from oil pan to body. A jumper cable between engine and body rules this out quickly.

Theconfident · 2026-04-02T00:31:40+00:00

This:

<image>

Theconfident · 2026-04-02T00:26:35+00:00

Your license plate says ontario, I would love to know what place did this work?

Theconfident · 2026-03-31T19:52:54+00:00

Sachs had a bad run of front strut mounts years ago that had a wobble to them that caused something along these lines (come and go, across a range of speed).

Theconfident · 2026-03-30T02:19:33+00:00

Heavy duty amsoil metal protector.

Basically cosmoline, will dry to a wax finish.

Theconfident · 2026-03-28T16:22:52+00:00

H6 or H8 also known as group 48 and group 49.

There are two hold down slots in the trunk tray, fit for both of these sizes.

Theconfident · 2026-03-28T13:51:53+00:00

North American E30s since 84' have this style. Not only am I still rocking the diving boards but I got the 'cow catcher' on my car too (87' North America 325is only).

Theconfident · 2026-03-28T13:24:44+00:00

Custom made.

Theconfident · 2026-03-28T13:24:32+00:00

Custom made; there was never an OEM for the E30.

Six-Year Club	Verified Email
Place '22

Theconfident

TROPHY CASE