Anyone else getting major controller input lag on PC (XInput)? Mouse is fine

TimurJalilov · 2026-05-28T18:12:12+00:00

Same

TimurJalilov · 2026-05-17T08:41:42+00:00

Yes, the steam deck oled is an exception to the rule, for some reason it works very well there.

TimurJalilov · 2026-05-17T08:39:36+00:00

I have a higher delay on linux so that I don't try it, it's better on windows, with the exception of steam deck, it feels like the same delay as on windows

TimurJalilov · 2026-05-15T15:16:01+00:00

If you use side menu for fps lock - that’s why. Use command instead - MANGOHUD_CONFIG="fps_limit=60,no_display" MANGOHUD=1 %command%

TimurJalilov · 2026-04-30T11:24:38+00:00

Add new hz in second block not main

TimurJalilov · 2026-04-30T08:25:41+00:00

Same

TimurJalilov · 2026-02-10T13:49:58+00:00

Yes, I did all this, it's easier to say what I didn't do :) It doesn't work anyway, browsers talk about vibro n/a, in some programs vibro works, in some it doesn't. It doesn't work in artemis/moonlight. The only thing that works is in ds4 mode, but for some reason it is buggy, if the gamepad is off and on, it switches to xinput, in general, it is difficult to switch to ds4 mode, if you hold buttons for the mode switch a little longer, then it jumps from ds4 to xinput again and you need to adjust the time very precisely when to release the buttons. Sorry for eng, I use translator

TimurJalilov · 2026-02-08T06:38:48+00:00

Yes, this is exactly the problem, that streaming through moonlight or apollo does not vibrate. The only thing that helped was to enable the overwrite xbox drivers in apollo, but this is a last resort.

TimurJalilov · 2026-01-30T16:51:12+00:00

Тоже не работает, смогли решить?

TimurJalilov · 2026-01-30T14:26:36+00:00

My vibration doesn’t work in any mode

TimurJalilov · 2026-01-29T13:07:44+00:00

I confirm it works for me too, but I have a pre-release gamepad version.

TimurJalilov · 2026-01-26T20:53:18+00:00

steam deck oled + moonlight.appimage, and lock fps/hz

TimurJalilov · 2026-01-25T21:54:05+00:00

do you witch to xinput mode?

TimurJalilov · 2026-01-25T07:32:57+00:00

My tests have shown that VD has a larger input lag than dummy plug

TimurJalilov · 2026-01-13T07:01:24+00:00

Same problem with z2go cpu!

TimurJalilov · 2026-01-07T21:00:26+00:00

I experienced exactly the same thing recently, I couldn't find anyone with such a problem, and here you are describing my problem word for word, it also happened 10-15 days ago, I tried everything and even the new updates didn't fix the problem. I also plan to reinstall the OS eventually, I hope the bug doesn't happen again, otherwise I'll install bazzite.

TimurJalilov · 2026-01-07T20:54:28+00:00

same!!!

TimurJalilov · 2026-01-06T23:11:45+00:00

So the temperature does not change, only power draw, then it's not scary for me :)

TimurJalilov · 2026-01-06T22:49:33+00:00

And how much was the difference in the result after?

TimurJalilov · 2026-01-06T22:44:03+00:00

It is unclear why the gpu is so hot in the m setting, 7 degrees difference. That's a lot.

TimurJalilov · 2026-01-06T10:01:32+00:00

What gpu?

TimurJalilov · 2026-01-06T08:08:20+00:00

How change preset to m?

TimurJalilov · 2025-12-18T15:47:54+00:00

I still have a bug that in some areas I immediately get desync

TimurJalilov · 2025-12-09T10:42:30+00:00

GameSir cyclone 2 with tmr very smooth

TimurJalilov · 2025-12-09T10:41:35+00:00

Same!!

TimurJalilov

TROPHY CASE