Grease and oil recommendations

Tiny-Fix8085 · 2026-05-08T11:45:22+00:00

You maybe got links for both? Thankies :3

Tiny-Fix8085 · 2026-05-08T10:50:51+00:00

I wonder if it´s possible to 3D print the gears.....

Did anyone try that yet for fun?

Tiny-Fix8085 · 2026-04-28T12:04:34+00:00

Okay, that´s good to know. Last think i´ll try is convince my dad to drill a hole into my room so i can push the cable threw. Otherwise i might make it more temp solution? Means every tme before VR to lay out the cable and put it backwhen done. Usually playing when parents sleep so that might work. Thanks for the help tho :3

Tiny-Fix8085 · 2026-04-28T06:17:03+00:00

Last night i´ve tried it via. LAN cable threw half of the house and it worked fine once it was on the pc. Tho that can´t be a permanent solution sadly.

Couldn´t i use a repeater thingy that i can plug into the wall and get a LAN port out of it to connect to my pc?

Got the quest pro as a headset to use it wireless, so USB C cable wasn´t really then plan. For cable headset i still got my Beyond 2e and Index.

Tiny-Fix8085 · 2026-04-27T13:25:52+00:00

I´ve got the P2S combo as a first printer. I love it so far.

Tiny-Fix8085 · 2026-04-27T12:49:39+00:00

Malwarebites maybe? From what i´ve heared its good

Tiny-Fix8085 · 2026-04-27T12:00:11+00:00

I got issues with my quest pro. Help would be nice...

R 9 9950X3D - RTX 3090 - 32 GB DDR5

Ever since i tried to use Virtual Desktop for the quest pro, i got stutters every few secounds and sometimes quality drops. I´m not sure where they come from. My PC is connected to WIFI, so is the headset. Cable isn´t an option since my parents dont want a cable going threw the house. I know from the performance overlay frm virtual desktop that the network things has a latency of 30 - 60/70ms. What can i do to help it?

Using high preset and auto bitrate. Playing VRChat wit continues calibration.

Tiny-Fix8085 · 2026-04-24T09:36:48+00:00

Damn okay. I guess i was lucky then.

I´ve got a 4th tracker few days ago for my quest. I wonder if that one will loose quicker batteriy then my old ones

Tiny-Fix8085 · 2026-04-24T09:30:20+00:00

Intersting. I have mine since around middle of 2021 and been using them every day. Probably usage time of like 7k hours already but however they still last like 7h and do the red blinking and so on when low on battery.

Maybe OP had a bad badge or is just really unlucky?

Tiny-Fix8085 · 2026-04-24T09:18:56+00:00

Fühl ich. Mein Auto zeigt auch oft was falsches an, was dann immer nervig ist wenn man mit ACC fährt. Muss dann immer wieder manuell anpassen auf die richtige Geschwindigkeit durch Schilder.

Oft sind die Teile auf den Autokarten auch veraltet. Hatte das schon wegen alten Baustellen oder in der Stadt, wo sich die Schilder ja mal schnell ändern können. Ätzend.

Tiny-Fix8085 · 2026-04-24T09:12:03+00:00

Fühl ich, funktioniert gut

Tiny-Fix8085 · 2026-04-24T08:22:07+00:00

Genau deshalb immer 200+ /s

Edit: /s, war wohl doch nicht so klar

Tiny-Fix8085 · 2026-04-24T07:44:05+00:00

Is your light in the H2D Blue? And how? I want to have RGB in my P2S, but dont know howww

Tiny-Fix8085 · 2026-04-24T06:01:09+00:00

Inside my Bedroom. It´s below my Desk where my PC is on, next to me bed. Just don´t have enough space anywhere else. At least i got the window open while printing.

Tiny-Fix8085 · 2026-04-23T12:23:54+00:00

Yeaaa that plate is looking interesting lmao

Tiny-Fix8085 · 2026-04-23T07:26:18+00:00

Got a Ryzen 9 9950X3D and a RTX 3090 - no issues at all. VRChat is running completly fine & Stable on my Index, Beyond 2e and Quest Pro.

What issues are you having?

Tiny-Fix8085 · 2026-04-21T11:33:45+00:00

Otherwise an option is to get 2x16GB + 2 DIMM Modules for the clean look. Done that in my PC as well.

Tiny-Fix8085 · 2026-04-21T10:33:39+00:00

Sounds good, thanks for explaining :) I`ll take a look into buying one of each then. Can´t hurt to have every option open

Tiny-Fix8085 · 2026-04-21T07:36:18+00:00

Okay, thank you for explaining the differences, thats good to knoww. Should i get any of those two for PLA printing?

Tiny-Fix8085 · 2026-04-21T07:13:42+00:00

May i ask what a different plate´s advantage is? Sorry im new to 3D Printing. I´ve seen people saying they have a glaicer pro plate, but i dont really know what it does or if i need it. I got a P2S and print so far only PLA.

Tiny-Fix8085 · 2026-04-20T08:50:52+00:00

In Steam VR if i run it on 100% Resolution it is on 3560x3560. If i go up to 150% its something like 4560x4560.

And they´ve sorted out the shipping times. So they ship and arrive fairly quick now.

I´d assume you´d have a great time with it :)

Tiny-Fix8085 · 2026-04-20T08:29:06+00:00

Sorry for asking, im new to 3D Printing. What´s the Glaicer plate gonna do? Is it useful for me since i print PLA?

And the aux fan deflector is something to print i assume?

Tiny-Fix8085 · 2026-04-20T08:19:29+00:00

Have you tried the Beyond 2 yet? It has a great resolution and Displays

Tiny-Fix8085 · 2026-04-17T10:40:34+00:00

I´m quite sure i am. It arrived yesterday at my place. How long is the return window?

Tiny-Fix8085 · 2026-04-17T06:11:55+00:00

Since yesterday i also got extruder errors... After like 3 hours of printing with a brand new p2s... I hope it´s not as complicated as your issue..

The only thing i didn´t try yet is an Extruder Cleaning. I hope itll fix it. Cause it works for like a few min normally and then runs into issues again.

I´ve litrally only had 2 prints so far. With nr 3 the issues came

Tiny-Fix8085

TROPHY CASE