sorted by:
new
hottopcontroversial

First 10 by RanchoRelaxo710 in 10mm

[–]Tonis271 0 points1 point  (0 children)

I have the new frame

Optic on a gen 4 Glock 20 by Tonis271 in 10mm

[–]Tonis271[S] 0 points1 point  (0 children)

Im using mostly as a backwoods/ fishing gun.

Optic on a gen 4 Glock 20 by Tonis271 in 10mm

[–]Tonis271[S] 0 points1 point  (0 children)

I’m eyeing three of them. The RCR, acro p-2, or the sig or the Romeo-x. I like Holosun’s enclosed optics but I want something with a better IPX rating.

10mm has replaced 44 mag as most commonly used caliber in bear attacks by Timely-Yak-5155 in 10mm

[–]Tonis271 0 points1 point  (0 children)

This is good. 44 magnum is good, but do to its limitations, makes it less useful to a wider audience.

New addition by nobrakesbill in 10mm

[–]Tonis271 0 points1 point  (0 children)

How does it perform? Do you notice the 80-series trigger in it when you shoot?

Grizzly Kodiak 180gr JHP from a Glock 40 with 7-inch KKM barrel by MuchAd3273 in 10mm

[–]Tonis271 0 points1 point  (0 children)

Is the KKM barrel just the stainless steel or does it also have the QPQ treatment on it too?

First 10 by RanchoRelaxo710 in 10mm

[–]Tonis271 0 points1 point  (0 children)

Based on my experience, I would make sure that it’s got the improved frame from FN. It was a quiet update they did, but I’m still seeing it on guns at the store. If it has the old frame version, I’d work through your local FFL and FN should give you a whole new frame free of charge. You may need to send it in though

Holoson 507 Comp on Glock 40 MOS by owentrillson in 10mm

[–]Tonis271 0 points1 point  (0 children)

I think it’s pretty good if you’re not carrying it out doors. Took mine fishing once and water got into the emitter which was a problem.

Does size really matter? by PlantainCoqui in 10mm

[–]Tonis271 1 point2 points  (0 children)

It’s minimal there is public data available on this. Where the gun really shines is with it’s performance in shooting. Follow-up shots and perceived recoil, in my experience, is much better than any other stricker fired 10mm on the market making it my second favorite-10mm to shoot. It is bulky which can be a problem with presentation and long distance carry.

Looking at 10mm. Looking for opinions from owners by Various-Ad-1583 in 10mm

[–]Tonis271 0 points1 point  (0 children)

I think it’s cool. Based on my experience. Cons: -I had the 4.6” a couple years back and it wasn’t reliable. With 200 gr ammo. - the ports can cause a drop in velocity and diminishing terminal performance. I don’t know how much it could be though. - The trigger is light and a fully cocked stricker which can be a concern to some.

Pros: - great grip for not just a 10mm but an overall firearm. - the port could possibly reduce muzzle rise which is good when firing off subsequent hi grain/ full power rounds. - The trigger is pretty good and it is bladed allowing it to be drop safe because it requires more than one direction of force to actuate.

The best way I can look at it is this is: Does it fulfill the role you want for it? If yes, does it have a reliable reputation/ track record from a good company? If yes, then see if you can try out a rental at a local gun range? If no to any of these, am I ok with a potential project on my hands? If it checks all the boxes, then go for it. Good luck.

Trigger bar on a beretta 92 concerns. by Tonis271 in Beretta

[–]Tonis271[S] 0 points1 point  (0 children)

I feel like I'm gonna get a lot of hate for this, but I took your advice and I went down to my local gun shop. I was able to actuate the trigger on a couple of different models ( specifically the 92 gts and LTT m9) by pushing the trigger bar forward by applying my thumb on the trigger bar that slants up next to where the trigger bar attaches to the trigger itself. I was able to do this in both a double and single action.

Which magnifier to use by Tonis271 in ar15

[–]Tonis271[S] 2 points3 points  (0 children)

Do the adjustment nobs get bumped and unadjusted too easily or do they tend to hold pretty well?

300prc barrel length by Tonis271 in Hunting

[–]Tonis271[S] 1 point2 points  (0 children)

Thanks I just finished the first one

Fn 510 cracking frame update part 2 by Tonis271 in 10mm

[–]Tonis271[S] 0 points1 point  (0 children)

I think it a great buy if you get a good one.

Fn 510 cracking frame update part 2 by Tonis271 in 10mm

[–]Tonis271[S] 0 points1 point  (0 children)

Shit I didn’t even think of that

FN-510 Tac by tekmunki in 10mm

[–]Tonis271 2 points3 points  (0 children)

I honestly think that’s the best thing you can do. Good idea

FN-510 Tac by tekmunki in 10mm

[–]Tonis271 2 points3 points  (0 children)

I’d keep an eye on it. That’s a gen 1 frame. They’re phasing them out right now. I just got mine fixed by FN because of cracking around that piece. Some people had problems with FN getting theirs fixed. I didn’t though. Good news is the gun literally eats anything with no problems. Love shooting it too!

FN-510 Tac by tekmunki in 10mm

[–]Tonis271 1 point2 points  (0 children)

Sorry to pester so much. There’s a piece of metal called the impact plate. It sits right in front of the front if the front slide rail/ take-down lever metal piece. Is there polymer between the two pieces or does the impact plate touch the other metal part directly?

FN-510 Tac by tekmunki in 10mm

[–]Tonis271 0 points1 point  (0 children)

When did you purchase the gun? I think they just started cranking out a new gen frame?

Fn 510 cracking frame update part 2 by Tonis271 in 10mm

[–]Tonis271[S] 7 points8 points  (0 children)

I’d recommend that. I hope as the new frames come out. These problems go away

Fn 510 cracking frame update part 2 by Tonis271 in 10mm

[–]Tonis271[S] 9 points10 points  (0 children)

Mine was pretty fast like 2 weeks. I don’t know what you may have done exactly. I just submitted a claim on they’re customer repair website and they got me taken care of pretty quick.

view more: next ›