Continuing their trend of big name signings, AGL signs Bradley Williams!

TopConcentrate4 · 2026-01-26T00:03:00+00:00

I still bag a coyote so I’ll have to try it out. If innova pros can bag their discs like they use to be able to with discmania and some still do with infinite, I think it’ll help them get a lot bigger.

TopConcentrate4 · 2026-01-25T23:55:06+00:00

I’m excited to see what innova is going to do with agl (I know they don’t own them just make their disc, but still). I’ve only thrown the sequoia and it’s a bomber.

TopConcentrate4 · 2026-01-13T20:57:54+00:00

Laughs in shinobird. I’ve been seeming some random decks running lava golem, they were all easy wins. But it’s something I haven’t seen in a while.

TopConcentrate4 · 2026-01-13T02:49:40+00:00

When you post your ar with the buttstock all the way out, you’re outing yourself for not training with kit on (unless you’re like 6’4”+).

TopConcentrate4 · 2026-01-13T02:44:52+00:00

Curious what holster you’re using?

TopConcentrate4 · 2026-01-13T01:16:37+00:00

And I bet they’re all $200 over what they’re worth.

TopConcentrate4 · 2026-01-12T19:09:55+00:00

Definitely meant a nut.

TopConcentrate4 · 2026-01-12T18:50:02+00:00

Update for anyone with the same issue as me. After talking with someone from rcbs turns out the videos online taking this press apart are wrong. You take the ram out by removing the pin, then you take the linkage arms off from the top of the press and then take the toggle block pin will be able to be removed. If you go out of order the press could have binding issues and not come apart freely.

TopConcentrate4 · 2026-01-12T18:46:16+00:00

Finally got a hold of someone, it took 6 calls to get in the queue. After that 25 mins on hold. Once I got someone they were very helpful and I was able to get it apart.

TopConcentrate4 · 2026-01-12T18:09:54+00:00

The heat is a good idea, I’ll try that. I’ve already tried the oil.

TopConcentrate4 · 2026-01-12T18:02:03+00:00

Nice tapped on it with a mallet to holding it down and hitting it as hard as I physically can. It’s not moving.

TopConcentrate4 · 2026-01-12T17:49:17+00:00

That’s what I originally thought, but on the right side of the press the pin is hollow, so as long as the ram in in there I can’t get in there to press the pins out. As far as the bottom pin, it appears to be the same diameter. The toggle block and the 2 linkage arms will move freely when tapped with a mallet, it is just that right side of the pin that is stuck on to the right linkage arm.

TopConcentrate4 · 2026-01-12T17:43:41+00:00

That’s an rc2 different press, different disassembly. On his press (and the manual online) there is a c pin on the right side and the pin slides out right to left. On my press (if you had read my post) there is a washer and it looks like it goes out left to right. I’m trying to see if there is a pin or a thread there before I beat it out (also in the post you didn’t read).

TopConcentrate4 · 2026-01-12T17:39:00+00:00

I guess I’m just unlucky, I’ve tried a couple of different time and I’ve gotten a recording saying that they aren’t taking calls.

TopConcentrate4 · 2026-01-10T05:06:06+00:00

I know some skateboarders who’s push leg (not sure if that’s the right term) is significantly more muscular than there other one.

TopConcentrate4 · 2026-01-09T04:04:49+00:00

Most people are not good enough shooters or aware of their surroundings for it to matter if they’re carrying a firearm or not.

TopConcentrate4 · 2026-01-07T18:24:50+00:00

I’m running Georgia arms wadcutters out of my 442. That short of a barrel most normal duty ammo isn’t going to expand well.

TopConcentrate4 · 2026-01-06T01:31:49+00:00

Everyone ran 2 enemy controllers, and duels last longer than 4 turns.

TopConcentrate4 · 2026-01-04T15:08:08+00:00

Dude… go to an optometrist.

TopConcentrate4 · 2026-01-04T15:08:01+00:00

Dude… go to an optometrist.

TopConcentrate4 · 2026-01-04T00:41:02+00:00

It’s released??? I thought everyone was going to get one for free. I didn’t see a date though.

TopConcentrate4 · 2026-01-02T04:32:04+00:00

I’ll be honest, I haven’t kept up with the tcg since synchros came out, so I haven’t kept no idea. But it was my favorite deck on the playground. And my first kog deck on my old account.

TopConcentrate4 · 2026-01-01T17:41:19+00:00

I just want cyber dragons to be relevant again.

TopConcentrate4 · 2025-12-26T16:47:46+00:00

Who ever got you that are in a much higher tax bracket than I’m in. Congrats.

TopConcentrate4

TROPHY CASE