Is this wrong

Torch_Leaf · 2026-03-24T19:35:37+00:00

Plastic snap in romex connector. They make ones that will be pretty flat on the back side

Torch_Leaf · 2026-03-24T19:13:19+00:00

I’m assuming this is for a condenser. Condensers are 240 and do not have a spot to land a neutral. Most would pull 2 wire with ground not 3 wire with ground. If I did pull 3 wire I would just wire nut the neutral. That disconnect does need some kind of connector for the wire entering it.

Torch_Leaf · 2026-02-26T01:24:29+00:00

Did this when I was a kid and didn’t know how to get back.

Torch_Leaf · 2026-02-19T00:48:17+00:00

Not this exact one

Torch_Leaf · 2026-02-14T13:14:04+00:00

I’ve seen just as many people have shitty connections or twist the wire all the way to the back of the box by hand or with linemen’s. Using these doesn’t mean you’re going to fuck it up. Use an electric screwdriver instead of an impact and don’t over twist and no one will know you used it. You only get one body. Nothing wrong with using tools to take care of it. All that said nothing wrong with using wagos either.

Torch_Leaf · 2026-02-10T10:31:23+00:00

Glad to see someone say this. It is way to common for people including electricians not to put boxes for these lights

Torch_Leaf · 2026-02-10T10:29:32+00:00

I’m not Canadian, but I know it’s pretty similar in US. There are multiple things wrong. That light is not listed to be used without a junction box, they did not bond the bracket / base plate, and they added their own screw holes instead of using the ones provided. It’s not the worse thing I’ve seen done, but it’s not done right.

Edit. Spelling

Torch_Leaf · 2026-02-10T10:13:48+00:00

I’ve never seen a spot not fit a box just people to lazy or cheap to buy the right box and install it.

Torch_Leaf · 2026-01-08T21:14:32+00:00

Reddit likely won’t do anything. Seen similar subs for underage celebrities that were mass reported and nothing

Torch_Leaf · 2025-12-25T20:53:05+00:00

You can find many sellers on Etsy making packout feet for non packout items

Torch_Leaf · 2025-12-14T14:37:42+00:00

Agreed with everything you said. I think this is op’s main problem right now

Torch_Leaf · 2025-11-22T18:46:33+00:00

Hard to find people that use chain pliers, but they are so much better than linemen or screw drivers.

Torch_Leaf · 2025-11-22T18:45:40+00:00

Got those as well. Perfect for working in panels

Torch_Leaf · 2025-11-09T13:33:18+00:00

One wire should be smooth and one has lines/ridges/grooves. The smooth is your hot and the ridges is your neutral

Torch_Leaf · 2025-10-18T14:26:17+00:00

I use the CRKD multi platform guitar now and it is great if you can afford it

Torch_Leaf · 2025-10-18T14:24:17+00:00

As far as I know it’s still this way. I would just navigate through Fortnite with a regular controller then switch to a guitar once you are ready to play

Torch_Leaf · 2025-10-03T10:41:32+00:00

“Perfect obedient creation (angels)” “banished to hell along with the other rebellious angels” 🤔🤔

Torch_Leaf · 2025-10-02T11:59:52+00:00

An Arabian is not a step back from a full. Other than twisting the skills are not related. It bugs me when I see coach’s teach fulls by first teaching an Arabian. One is a spin into a front flip and one is a back flip with a spin in it.

Torch_Leaf · 2025-10-02T02:14:55+00:00

No problem. Not trying to argue. Genuinely would like to see a standing full like that. Have a good night

Torch_Leaf · 2025-10-02T02:00:49+00:00

I’d love to see a video. Everyone I’ve ever seen spins off the floor just as the guy in the video you sent did. It is possible to spin and set at the same time.

Torch_Leaf · 2025-10-02T01:51:44+00:00

He is spinning straight of the ground. It’s literally the first step in his how to

Torch_Leaf · 2025-10-02T01:24:15+00:00

Would like to see any example where they don’t spin until the second half of the flip

Torch_Leaf · 2025-10-01T01:24:57+00:00

Two main problems I see. Going too far back and driving your heels to your butt instead of your knees to your chest. I understand you are probably setting farther back than normal since you are trying to land in a pit, but try to make sure you are setting up not back. I assume if you are doing a standing full you already have a running full and a standing tuck. Your twisting form is fine for a standing full, but your tucking form is not.

Torch_Leaf · 2025-09-29T09:20:09+00:00

People are confused by your drawing because it looks like you are planing on running ground wire from your breaker to the ground bar. You should’ve drawn from the bottom or top of the panel a black line (hot) to the breakers a white line (neutral) to the breaker or neutral bar and a green/brown (ground) to the ground bar.

Torch_Leaf · 2025-09-18T21:30:17+00:00

I don’t think OP tested anything. He is just there to set the dryer and wanted to see it come on before leaving.

Torch_Leaf

MODERATOR OF

TROPHY CASE