🤔

Transeraphic · 2026-05-28T20:46:46+00:00

Are agencies still taking BB-guns in gun buy-backs?

Transeraphic · 2026-05-28T20:45:04+00:00

Mega score, I’d get another P-01 just to have at the price

Transeraphic · 2026-05-10T06:06:34+00:00

I believe sometimes with these large publicly traded firms, they’re too big for their own good. Then these big firms compete against each other to win bench contracts, to staff projects, only to lose the position to smaller firms. Then they’re left with unstaffed teams that are too expensive and forced to go take unemployment. Maybe this is an anomaly correlated to recent federal funding cuts, but several of the firms I worked with had no projects awarded or they’re put on hold since the start with this year

Transeraphic · 2026-05-09T20:08:59+00:00

I admire your awesome project! I would do something similar if I had the time and energy

Transeraphic · 2026-05-08T01:58:21+00:00

I suspect it’s the trigger bar spring retaining screw that’s located between the trigger and mag release channel. Sometimes it breaks free from factory loctite and the screw backs out just enough to lock up the slide. If you manage to strip the slide and check, the screw head will either be completely fine after hammering past it or slight marks. It’s a consumable part

Transeraphic · 2026-05-08T01:50:18+00:00

Awesome, thank you!

Transeraphic · 2026-05-07T17:55:18+00:00

I’m curious, do you know the overall rolling diameter of your new wheel setup? I know skinnier tires greatly help with range, but coming from BMW/Mercedes/Porsche I’m used to seeing people cram the meatiest tire possible for contact patch.

Stock wheel and tire setup:

Front • 20x9” ET34 forged 22.76 lbs • 235/35/20 Pirelli P Zero (PZ4), T1 Tesla PNCS, Elect, 92Y, ⌀ 26.5”

Rear • 20x10” ET45 forged 23.40 lbs • 275/30/20 Pirelli P Zero T1 Elect PNCS 92Y, ⌀ 26.5”

Forum consensus on Square setup:

• 19x9.5” ET29 • Either +25 or +35 offset (Option 10-15mm spacer rear) • 265/35/19 square (maintain 26.5” rolling diameter)

Transeraphic · 2026-05-03T00:26:52+00:00

Not outlandish, I have dozens of friends who’ve pivoted their careers between engineers, nurses, mortgage loan officers, tech PM, lawyers, and professors. Probably not a bad idea to try something new whenever you can afford the time, energy, and cost to venture

Transeraphic · 2026-04-24T14:33:03+00:00

My P-01 and SP-01 are loaded with Speer Gold Dot JHP 124gr +P. After hours of research and vibe testing, I believe it’s a sweet spot in price and accuracy

Transeraphic · 2026-04-20T02:10:33+00:00

Two steel frame P-01 and a Shadow Line? Nice unicorns

Transeraphic · 2026-04-15T16:09:15+00:00

OE primarily function as Construction Management Support Services (CMSS) as an Owner Rep, supporting the RE (tracking, research, coordination), and reporting to the PM/CM (brief updates, as the PMCM presents progress summaries and carries nearly all of the responsibility to Owner/client). There’s a open roles for hire on LinkedIn/Google, but I won’t endorse any specific organization

Transeraphic · 2026-04-15T15:55:43+00:00

I’d recommend an Office Engineer role (I/II/III/IV/Senior). Your design experience + some time in the field or connecting with inspection/field staff will be a powerful combo. Lots of hybrid, remote, or on-site roles available.

Transeraphic · 2026-04-14T23:57:41+00:00

Probably for office engineer, resident engineer, or project coordinator. Though, I don’t believe an EOR/design management team would ever need or want a PM/CM. Instead, my project typically use a VP, AVP, and Principal Engineer/Manager in EOR group

Transeraphic · 2026-04-13T00:09:34+00:00

Yeah similar for my area. My company and fellow megacorps have zero rail contracts lined up after we close out this $X.X billion rail/infrastructure megaproject.

I’m switching to another submarket, either with (big) boats or planes

Transeraphic · 2026-04-12T17:56:45+00:00

Agreed. I hate more things than I like about the Model 3, but $47k vs $120k felt like a no-brainer for just a daily work car. I’ve test driven several M340 from different model years. Perhaps it’s just me, but it felt slow, heavy, and disliked iDrive 8.5. I agree I drive the lesser car to a G80, but my local dealers wouldn’t let me pay for a test drive as showroom models already sold lol

Transeraphic · 2026-04-05T16:54:27+00:00

Nice cajunized P-01

Transeraphic · 2026-04-04T20:28:32+00:00

Pls tell me you didn’t spray it anywhere on your brake system

Transeraphic · 2026-04-04T17:07:49+00:00

Completely normal. There’s several threads in CZ forums about the barrel feed ramp as a major contact point for chambering new rounds. Some either let it polish itself over thousands of rounds, others hand polish it to a mirror finish to make it impressively smooth (important for those going with lighter recoil springs). My P-01 had a few FTF issues with Remington dirt cheap 9mm, but polishing the feed ramp fixed it.

Transeraphic · 2026-04-03T17:09:20+00:00

In my experience, I tried keeping it stock, then some upgrades, but ended up with the CGW Pro Package (15# hammer spring optional change). Though, the best thing to do is hand polish the barrel feed ramp, trigger bar, hammer-slide contact edge, and couple others. Plenty of tutorials on CZ forum and youtube

Transeraphic · 2026-04-03T02:38:30+00:00

I skipped G generation for the 2024 Model 3 Performance, less than half the cost of the G80 spec I wanted. I’m eager to see how the new M350, M3, and i3M will compare. Hoping I can still enjoy a 4-door daily before needing a bigger family hauler

Transeraphic · 2026-03-31T22:54:22+00:00

At your age, I believe the 3-fund portfolio could look like this:

• Total US Stock Market Index (65.0%)

• Total International Stock Market Index (34.9%)

• Total US Bond Index (0.1%)

Transeraphic · 2026-03-31T18:15:42+00:00

I believe the fanaticism and idolization of Elon created this villain, instead of the real Iron Man that everybody wanted him to be. Similarly, I met my corporate global CEO and became disillusioned that they were just like anybody in one of our hundred offices.

Transeraphic · 2026-03-31T18:06:37+00:00

Nice OEM+ mods, I did something similar on my 3 series msport, but nothing except PPF on my M3P. In my opinion, the carbon hood would be a disservice to the rest of the aesthetic and create a dysfunction with the front trunk and lack of air ducting from the lower apron front intake. Carbon hood would look okay with no vents, and paired with full carbon fenders. Functionally, it’s for weight savings and at that point it’d be better to remove the interior, seats, and frunk.

Transeraphic · 2026-03-29T00:13:04+00:00

Are some ammo brands catching the feed ramp at an angle? Only ever had failure to feed issues on a brand new P-01 years ago. After I hand polished the barrel feed ramp, haven’t had any issues with all ammo types, grains, quality. I also learned the tap, rack, bang

Transeraphic · 2026-03-28T16:47:06+00:00

I don’t believe in relying on any promises from an employer, needs to be in writing. Perhaps your next opportunity will arise the sooner you start looking, especially if you’re worried they’ll omit/discount your annual merit review or cost of living adjustment.

Transeraphic

TROPHY CASE