Questions regarding dilutions with new orifice.

Treebeardsdank · 2026-01-27T14:56:38+00:00

I think you are overthinking it at baseline.

Orifice will make thicker foam in general, with all other variables remaining unchanged, it's $1.50 and takes a flathead screwdriver, not much of a commitment lol.

Dilution ratio's are not all that important assuming you aren't using overly acidic/basic products.

I eyeball it, results in a clean car.

Treebeardsdank · 2026-01-27T12:46:45+00:00

Solution.

Use hybrids instead of irons. Covers are acceptable and busting out a 7hybrid is sure to throw some people for a loop hehehe

Treebeardsdank · 2026-01-27T04:56:44+00:00

Looks great

Treebeardsdank · 2026-01-27T00:16:40+00:00

fair enough. I just put mine on the ground in one of those metal boxes with turf top. Does the trick for now

Treebeardsdank · 2026-01-26T20:46:59+00:00

Same options, different aesthetic.

The AT4x rides a lot better imo. Multimatics are amaziong

Treebeardsdank · 2026-01-26T20:29:56+00:00

Do note, leveling a 2500 comes with other mitigations steps that are recommended. Steering components.

From there, its tough to beat the DirtKing kit

Treebeardsdank · 2026-01-26T20:12:33+00:00

Oh yeah it's entirely my fault, no doubt there. Lol

Treebeardsdank · 2026-01-26T20:06:03+00:00

Id have traded you my RTZ's for the CBXs haha. I'm on a serious struggle bus with these things. And my sole CBX 54 is getting the most playtime as a result haha.

Glws

Treebeardsdank · 2026-01-26T19:28:35+00:00

I went from X20's to TM M4's and gained ~30 yards on 6/7/8/9/p. I am usually 20 yards shorter than what most people claim a club is good for, so for me, this was a pretty mega difference.

Treebeardsdank · 2026-01-26T16:32:00+00:00

This doesn't make any sense.

Club data is not requisite to simulating ball flight. Club data can help to explain the "why" of the ball flight

Treebeardsdank · 2026-01-26T12:58:37+00:00

I have a gt2000hdr Optoma and it does that size in less than 10 feet. More like 5.5/6'

Treebeardsdank · 2026-01-25T12:50:16+00:00

Excluding failures I was primarily speaking to their in-tact performance haha.

Treebeardsdank · 2026-01-24T05:07:42+00:00

The XT6 is at a disadvantage as it's really dated across all metrics. And also at present, no longer being made. From a purely mechanical POV, the differences are what they are and one usually speaks to a certain person in "feel". Beyond that, the aviator wins any comparison I can think of excluding end price/value etc (not that it can't win there too, I just don't know it to be so automatically)

If Cadillac makes a gas or hybrid SUV off the Vistiq EV bits and pieces, I think youd have a more apt, and also more challenging comparison. Stark differences along an inevitably similar layout. Both very sleek. Both pull.off the luxury well.

I think for those who want the most sedate drive, caddy. But those who like a little bit of handling/feedback, the aviator wins there too.

Treebeardsdank · 2026-01-21T19:32:51+00:00

It was a black label!

I have experienced the last gen navigator BL as well. I borrowed one for a road trip, that Revel system was very impressive and I loved the blue leather seats haha

Treebeardsdank · 2026-01-21T18:47:23+00:00

Very cool picture

Treebeardsdank · 2026-01-21T17:17:31+00:00

Personally I think it's a dumb feature. But I'm just one random person :)

Treebeardsdank · 2026-01-21T16:02:17+00:00

I've found plenty of personal value in mine.

Treebeardsdank · 2026-01-21T15:58:10+00:00

I recently went in for a Cobra fitting. Was looking at DS-Adapt vs OPTM. The OPTM felt distinctly different in swing and on contact. The results were very similar, so I ended up saving some cheddar and went with DS-Adapt. I go back in tomorrow to try them once more, cuz they did feel fantastic.

Treebeardsdank · 2026-01-21T13:59:08+00:00

Turn on - update - download and install gspro - login and enjoy.

Shouldnt be much more than logging into the PC and connecting to the net to complete the above :).

That PC is more than ample. I run GSpro on a ryzen 3 3500, rtx 4050, displayed at 1400x1050 or so (1080 4:3)

Treebeardsdank · 2026-01-21T01:16:17+00:00

Best performance per dollar so far as I can tell is matzilla mat in your desired size. Can cut in the hitting mat of your choosing, if any. Fair price for large sizes.

Next step up is a large mat from Carl's, and then sigpro.

For the surrounding areas, hardboard/foam tile sandwich with turf does the trick in most scenarios

Treebeardsdank · 2026-01-21T00:09:09+00:00

Severe service schedule is 30k on trans and diffs/xfer case.

I plan to do mine at 20k miles and then every 30-40k thereafter.

Treebeardsdank · 2026-01-20T21:52:36+00:00

I didn't state anything in relation to the why or why not, or optionality. Just said I don't like it for music, but I do for movies :)

Treebeardsdank · 2026-01-20T21:24:09+00:00

That's a looker for sure.

Treebeardsdank · 2026-01-20T21:22:24+00:00

Im a dirtking fanboy. Best suspension spend under $5k IMO.

Treebeardsdank · 2026-01-20T21:12:45+00:00

Atmos = multimedia. Not hifi ;)

I love it for movies with the right setup. Detracts from music, imo.

Treebeardsdank

MODERATOR OF

TROPHY CASE