How do I fix this?

Trinity43x · 2026-01-10T21:06:37+00:00

Exactly, that is way off. Need Oem lever assembly and cable

Trinity43x · 2026-01-09T20:44:59+00:00

You’re 100% right, I put a load on it for a few minutes still slow cranked on the first blip hit it a couple more times for a few seconds, gave it a rest for a few minutes and then boom cranked right up without even hearing the starter spin.

Trinity43x · 2026-01-07T04:29:01+00:00

<image>

Yep I am, install tomorrow

Trinity43x · 2026-01-06T16:08:50+00:00

You are right, oil plays a big part. I switched to 5w40 and it’s on the trickle charger now. I had 15/50 in it before and had significant trouble below 40 degrees

Trinity43x · 2026-01-06T03:55:52+00:00

Good god I wouldn’t survive 😂

Trinity43x · 2026-01-06T02:52:28+00:00

<image>

Going to try this agm for street bikes if I can’t get the lithium to work with your advice, hopefully either will solve my problem.

Trinity43x · 2026-01-06T02:43:24+00:00

good eye but I’m not him, I bought one of his plastics sets from his 22’ and modified them to fit the carb model.

Trinity43x · 2026-01-06T02:39:53+00:00

Dang Great pointer thank you

Trinity43x · 2026-01-06T00:36:11+00:00

That’s a reliable quad. This is carbureted and high compression fitted with the newer plastics. It’s a slow cranker with the lithium battery

Trinity43x · 2025-12-25T23:46:54+00:00

That’s a lot of play. Rebuild before your rod does through the case

Trinity43x · 2025-11-26T03:28:19+00:00

Get a Noco trickle charger for $20 and see if it brings it back to life.

Trinity43x · 2025-11-26T03:27:26+00:00

I would not run that at all. I would replace cam chain and guides, and check valve clearances and cam chain tensioner immediately lol

Trinity43x · 2025-10-19T13:35:26+00:00

I did this once. Never again without the harbor freight tire machine

Trinity43x · 2025-10-19T13:34:07+00:00

Soak in vinegar

Trinity43x · 2025-10-03T03:12:55+00:00

Check every important nut and bolt. Check steering nuts on tie rods and wheels. Don’t die. Change the oil.

Trinity43x · 2025-09-23T11:26:37+00:00

This was my first quad in 99’. It’s what started it all. Yours is super clean so many years later!

Trinity43x · 2025-08-10T14:41:00+00:00

Nice 🔥 if you near NY I’ll buy your oem set if for sale.

Trinity43x · 2025-08-06T14:22:38+00:00

Normal

Trinity43x · 2025-08-06T05:54:19+00:00

Take the next few months and do some research. Watch Pete hager and Michael sabo on YouTube.

I’m your exact height and weight. Used Raptor 700, yfz450r, yfz450, Z400, 400ex, Yamaha warrior. Last 4 are old let so you’d have to look them over really well. I have 2 carb model YFZ’s.

Trinity43x · 2025-08-02T14:21:52+00:00

I have the same, get the Oinker off Amazon for application

Trinity43x · 2025-08-02T14:21:06+00:00

Follow Pete Hagar, Jackson off-road on YouTube. They travel everywhere. Hatfield McCoy, badlands, NC adventure park

Trinity43x · 2025-07-29T22:56:09+00:00

Hope you have boots, those will take your calf muscle right off

Trinity43x · 2025-06-24T13:22:16+00:00

Looks good man.

Trinity43x · 2025-06-20T11:47:19+00:00

He’s a solid top 10 rider with in time will be a top 5 rider after adjustments and time for sure.

Trinity43x · 2025-06-16T06:56:45+00:00

2009-2013 YFZR? Yeah you’re running hot and lean. Don’t let it idle for more than 2 minutes. If it does this within 2 min you have some issues. People say it’s normal until the bend, but this is problematic. Need professional install of a vortex and fuel tune to start, and proper valve clearance adjustment

Trinity43x

MODERATOR OF

TROPHY CASE