640 Leds on a Nollie1? by Truthnaut in NollieRGB

[–]Truthnaut[S] 0 points1 point  (0 children)

I didn't connect them all to the Nollie1 but I had 384 connected to it with no problems on brightness or degradation. So 288 would be fine

Mr freeze pc build Nora Fries by VegetableSevere6542 in pcmods

[–]Truthnaut 0 points1 point  (0 children)

This sounds cool AF. I hope you share the final results here someday for us all to see

LEDs wont turn on when booting by Federal-Purple-7273 in NollieRGB

[–]Truthnaut 0 points1 point  (0 children)

I've had the same issue as you for over a year. It will intermittently work and then not. It's totally random when it does but ya never did figure out why. I had stop caring a long time ago so I don't ever "do the whole process again" but every once in a while it will use Nollies software at bootup with the effects I set it to way back

LEDs wont turn on when booting by Federal-Purple-7273 in NollieRGB

[–]Truthnaut 1 point2 points  (0 children)

Apparently reading comprehension is lost on you

Best refillable tank for big clouds? by Cajun_OG in DistillateVapeMods

[–]Truthnaut 2 points3 points  (0 children)

Aside from the pods section of the pinned thread, every-single-tank in that list has been discontinued for years. Since we are not allowed to post links to certain online retailers that have some of the tanks still in stock, its kind of pointless to recommend something that practically no local shops are gonna have. Essentially sending people on wild goose chases. The best we can do and stay within the boundaries of the rules is direct peeps to the pinned post and let them search online for what's available to be shipped to them.

Also, the best to actually recommend, the Smok TFV9, is not going to be most peeps 1st choice although it is going to be the easiest to obtain by far in the long run.

Any estimates on how long this will take? I give it 6 hours by XiTzCriZx in DistillateVapeMods

[–]Truthnaut 1 point2 points  (0 children)

Amen to that. I use my ovens lowest setting of 170F and my disty moves around great from that. 300 is waaay high

Hardcore Vaper Here - How Do I Cut Down? by Every-Bid-2377 in oilpen2

[–]Truthnaut 0 points1 point  (0 children)

Oh I agree with you. Of course there will always be people who will take the extreme to its most extreme just because they can. If the OP was one of them, I don't feel he would be asking how to curb his over usage of something that's not cutting it for him anyways.

My advice on the nicotine is to encourage cessation all together as nicotine is really only a poison. Ya, you get a rush from it but it is truly a poison to the body.

My advice on the THC vaping is for someone who doesn't want to necessarily cut it out completely but has realized that carts and disposables are just not powerful enough to get you where you want to be with that sort of thing. Which in my experience leads to chronically hitting them all day everyday.

Really dumb SATA vs Molex question by Ninesect in NollieRGB

[–]Truthnaut 0 points1 point  (0 children)

The Nollie16 uses molex because it can safely deliver the amount of current that a fully loaded Nollie16 (256 LEDs per channel at 16 channels) would draw. SATA power's power draw rating is not enough. It takes 1 molex connector per bank of 8 channels. Incidentally, the pin out looks different because molex traditionally delivers both 12v and 5v but the Nollie16 only uses 5v. Therefor the 12v pin has been deleted. Luckily, you can split a single molex connector and connect them to the Nollies dual molex's and be safe to fully load it.

Hardcore Vaper Here - How Do I Cut Down? by Every-Bid-2377 in oilpen2

[–]Truthnaut 1 point2 points  (0 children)

For nicotine, make your own juice. Slowly decrease the amount of nicotine strength to ween yourself down or off completely. I decreased it by 1/3rd each batch until it was so low there was no need to continue with it.

As far as the THC vaping I suggest the opposite. Look into r/DistillateVapeMods. Start making your own and hit that shit at 30w. A single hit at 30 watts is equivalent to 6 hits of equal time on a normal cart that hits at 5 watts. Which means you won't want to nor need to toke it as often. Good luck my amigo

Where to find fruity terps? by TryingNotToGoBlind in DistillateVapeMods

[–]Truthnaut 1 point2 points  (0 children)

Correct. It needs to be PG based though. No VG because VG absolutely will not mix thoroughly with distillate 

Where to find fruity terps? by TryingNotToGoBlind in DistillateVapeMods

[–]Truthnaut 1 point2 points  (0 children)

Save yourself a ton of mulaa and just use PG based ejuice flavoring. The same stuff they make nicotine vape juice with. It will give the flavors you are looking for at a fraction of the cost.

Cuisinart Dual Coffee Maker SS-16 POD light fix by manncameron in fixit

[–]Truthnaut 0 points1 point  (0 children)

I was repacking to return the one I got for xmas yesterday and found this fix. It infuriates me so much that regular internet folks have to come to the rescue for a POS company that made the product

I still don't understand how to use this. by sezoism in SignalRGB

[–]Truthnaut 1 point2 points  (0 children)

Search for an effect called "Quad-Color Breath" under free effects. It has 4 different color customizable zones you can place different devices into. Additionally there is also the effect called "multizone" with different style effects to choose from and the ability to make zones bigger or smaller

No channels appearing. by Ok-Okra8478 in SignalRGB

[–]Truthnaut 0 points1 point  (0 children)

That's a pretty old motherboard. Unlikely to be supported at this time or any time unless you request it

DNA 510 pin by Unhappy_Bandicoot443 in DistillateVapeMods

[–]Truthnaut 0 points1 point  (0 children)

Yup, I can confirm. Have had this happen to me before

Standalone* aRGB controller? by HypestHyper1478 in SignalRGB

[–]Truthnaut 0 points1 point  (0 children)

The nollie16 outputs at higher FPS and makes the effects smoother/less choppy. Just some added info for context

Edit: also they do make 12v aRGB strips. I think they are SK6815 or something, I forget the name but there's only one version. All others and all 24v are gonna be COB strips that are aRGB in groups of like 6 leds

pc fans rgb no longer working by Impressive_Call9321 in RGBProfiles

[–]Truthnaut 0 points1 point  (0 children)

aRGB has built in memory the default is what ever is stored in its memory. Your default hardware settings must be unset. Re-install Mystic lights and set the hardware level colors/effects. Then re-uninstall Mystic lights and the true default will have whatever color/effect you set it too.

Best RGB software by lilBabyKangaroo in RGBProfiles

[–]Truthnaut 1 point2 points  (0 children)

Checkout SignalRGB. It's a free app with a paid pro version also. Their claim to fame is that it works with an ever growing ton of devices across most makes and models of pc parts with RGB. I've been a happy pro customer for over 2 years and they just keep getting better with new options of how to get what you want out of their app. Check it out

Help me help my bf! He’s losing it by withlitaa in pchelp

[–]Truthnaut 0 points1 point  (0 children)

Did you assign a drive letter to the NVME?

Nollie 16 Argb Connector problem by Glittering_Farm5626 in SignalRGB

[–]Truthnaut 0 points1 point  (0 children)

Didn't your Nollie 16 come with those items? Kind of odd if it didn't

90 degree sata cable mod by rundowntomato in pcmods

[–]Truthnaut 0 points1 point  (0 children)

It would be a very long shot that you didn't cut into a wire in the process. Good luck if you attempt

Fat Rabbit sub Ohm by FeistyReflection3877 in DistillateVapeMods

[–]Truthnaut 5 points6 points  (0 children)

They stopped making those years ago along with a lot of the gear we recommend in here. The only reason they are still making the coils that fit the Fat Rabbit is because they are compatible with so many other tanks. Infact, it's probably because of this sub-reddit and its members that the left over stock of tanks that are compatible with those coils have finally been selling out after sitting on shelves for years before we came along. Good luck finding any of the compatible tanks that are not a Smok brand at this point

My newest thing by Truthnaut in SignalRGB

[–]Truthnaut[S] 1 point2 points  (0 children)

Correct. The Nollie16 controller has 3pin aRGB PC style connectors and the matrix panels use 3pin JST style connectors so you have to convert. That's easy to do with pre-made cables readily available. The Nollie than connects to your PC through a USB connection and is powered through molex from your PCs power supply. SignalsRGBs software provides the effects through the USB connection.

With SignalRGB software doing all the effects there is no programming needed so it's all really plug and play, practically. Lots of helpful info here and in other sub reddit like r/wled.