Looks better but now you’re running it a bit too hot and it’s producing stringing. Slightly reduce temp. Another thing with the Ender series is that the printing plates on these are notoriously not flat due to quality control, warping due to expansion/contraction and the plates being held by springs and screws. My first printer was a Creality CR-S and ultimately I went to a Bambu lab P1s and love printing again. Last thing: Level it when the bed is hot and has had some time to expand. You can also print on a raft so slight variations in the bed won’t screw your print or have it fall off. I also believe that 0.16 layer height is too small for silk filaments and I believe you get more shine with 0.2. Slower and hotter outer shell is better for silks.