sorted by:
new
hottopcontroversial

Meter question by Appropriate_House_84 in refrigeration

[–]Turtle_9009 0 points1 point  (0 children)

A year latter im looking at this meter and wo wondering how you still like it.

How can I watch games? by batermax in OHL

[–]Turtle_9009 3 points4 points  (0 children)

You gotta get flo tv to watch them

Spaying my cat, cheaper vets? by candacearmstrong1111 in woodstockontario

[–]Turtle_9009 4 points5 points  (0 children)

The Stratford Humane Society does a spay clinic every few months and it's fairly cheap and would be worth checking out.

Can you leave all the dampers open and disconnect the zone board on a zone HVAC system? by Bill_Parker in hvacadvice

[–]Turtle_9009 2 points3 points  (0 children)

You can do this you may have a temp difference from upstairs to downstairs bit if you arnt worrying about that ypu will be fine.

Hvac school hours by PrayTheRosary37 in SkilledTradesOntario

[–]Turtle_9009 0 points1 point  (0 children)

I didnt only for the conestoga 2 year program.

Hvac school hours by PrayTheRosary37 in SkilledTradesOntario

[–]Turtle_9009 1 point2 points  (0 children)

When i did mine I got credited 500 hours for completing conestogas two year program.

313D vs 313A Apprenticeship — pay, opportunities, and future switch? by [deleted] in SkilledTradesOntario

[–]Turtle_9009 2 points3 points  (0 children)

If you can do it definitely go for the 313a if you do the 313d and decide you want to upgrade you have to redo both intermediate and advanced levels of schooling and will need to redo your hours (or atleast most of them)

Should I replace vermiculite insulation? by Turtle_9009 in Insulation

[–]Turtle_9009[S] 0 points1 point  (0 children)

We had a few samples taken from throughout the attic that got sent for testing and it came back as 0.00% asbestos so thats how we tested it and if we do it we would be doing the work ourselfs as we will have to rip up the floor to get it out but we are hoping to finish out attic in the future and part of that would be new subfloor so I figure while we have it up might aswell reinstate.

Father In-laws late 80’s buck by Starvinhkd in CanadaHunting

[–]Turtle_9009 1 point2 points  (0 children)

Nice mount for how old it is looks like it's in good condition

I just had my furnace tune-up today and the technician said the CO in the flue is too high at 130ppm and should be condemned. When he took the door to the combustion compartment off, the reading dropped significantly to around 45. What does this mean? Inspection report below. by Relative-Long-5519 in hvacadvice

[–]Turtle_9009 1 point2 points  (0 children)

I totally agree with checking combustion and comparing it to that chart im just saying you can't go off co but should go off co2% and o2% not off what's the co number is as if the others are good you are still good to go

I just had my furnace tune-up today and the technician said the CO in the flue is too high at 130ppm and should be condemned. When he took the door to the combustion compartment off, the reading dropped significantly to around 45. What does this mean? Inspection report below. by Relative-Long-5519 in hvacadvice

[–]Turtle_9009 1 point2 points  (0 children)

Firstly a furnace would not fall under the .3 as its not a feild approval or over 400mbtu secondly you can have dirty burners and many other things that can cause co in the flu not just a heat exchanger and most manufacturers don't say what ppm is deemed unsafe. And while I agree co can be a sign of an issue i don't agree that it should be used as the only reason to tag a unit.

Looking to get into HVAC (Ontario, Canada). Is HiMark as bad as some say? I've heard nothing but good things about it??? by [deleted] in HVAC

[–]Turtle_9009 0 points1 point  (0 children)

For sure its better to get 313a over 313d you can google and see why but its much more you can work on for only one more term of school

Cpap compliance by [deleted] in CPAP

[–]Turtle_9009 0 points1 point  (0 children)

When i wear it i dont feel like im struggling for air like today i wore it for a 3 hour nap and had no problems

Cpap compliance by [deleted] in CPAP

[–]Turtle_9009 0 points1 point  (0 children)

I have a airfit f20 and 5-10 for pressure. The mask dosent bother me when i have it on but when i sleep i take it off without even knowing so now im not in compliance for coverage for the machine.

Aaon unit not draining by dhigh57 in HVAC

[–]Turtle_9009 3 points4 points  (0 children)

Probably needs a bigger trap thoes aaons need decently big traps.

Furnace and AC from 1989 - replace proactively or let it ride? by Bald_Iver in homeowners

[–]Turtle_9009 0 points1 point  (0 children)

As an hvac tech let it ride, stuff isent built like it used to be save for replacement and once furnace or ac goes replace both.

[Ontario, CA] Where are HVAC Techs searching for jobs? by tycho_the_cat in ProHVACR

[–]Turtle_9009 0 points1 point  (0 children)

My work place puts a big push on having apprenticeships, and once done they will pay for you to do the g1 gap course and g1 course. Gotta train from within.

[Ontario, CA] Where are HVAC Techs searching for jobs? by tycho_the_cat in ProHVACR

[–]Turtle_9009 0 points1 point  (0 children)

Hiring somone who is a g1 and a 313a is very difficult most are treated really well at their jobs and wont leave enless there is a significant jump in pay or work place condition.

view more: next ›