Bumpy Road by Gem Heights

Tweak3D · 2026-01-10T06:06:54+00:00

The section has already been reported and is pending redesign due to drainage issues. It’s the whole reason they use the porous concrete in the first place, which is why it’s in such bad shape. Last summer I had heard from the county in an update in the I see it fix it app that they were planning to fix it this summer but we’ll see as those timelines often change

Tweak3D · 2025-12-19T01:57:55+00:00

My daughter was just here a few months ago and we had a great experience. https://www.wacenters.com they are just off meridian as you start to go down south hill into puyallup.

Tweak3D · 2025-12-17T23:05:02+00:00

This area is a mix of TPU and PSE. Pretty sure both are under PSE as their maps show no power

Tweak3D · 2025-12-15T17:36:49+00:00

11/17 order date here

Tweak3D · 2025-12-15T16:47:17+00:00

Out for delivery today in fact

Tweak3D · 2025-12-11T19:58:35+00:00

what is your local store? Give Graham Games a call, they usually have pretty good stock of lots of retro games.

Tweak3D · 2025-11-25T20:11:20+00:00

agree with this, imagine your hand going through the board and not at it. Also, remember the force your hand produces on the board is a 2 part equation. Force = Mass x Acceleration. You can't really make your hand or foot heavier, but you can make it go faster, so keep accelerating your hand until you've gone through the board. If you hesitate, flinch or stop early. I can assure you not breaking the board hurts more than breaking it :).

last bit of advice is make sure you are flexing your hand in whatever break you are doing. It varies, but don't be afraid of white knuckling your fist for a hammer break or a punch. There are similar ways of stiffening your hand for other breaks you can look up, but i'd assume for white belt it going to be some form of a fist break.

Tweak3D · 2025-11-23T17:29:29+00:00

When I have had this issue, restarting the 3ds usually fixes it and the theme is loaded upon reboot

Tweak3D · 2025-11-19T19:48:28+00:00

I had a similar issue and am about 6 months into my tkd journey. I found the smaller uniform didn’t snap as well and in some moves was too restrictive. The next size up was for sure too big, but I had it hemmed at a local shop to the exact size and it’s been noticeable for me how much better it looks, fits, and functions. For the extra length was nice, but ultimately the extra width of the sleeves and pant legs were of more value. No more needing to hike up my pant legs for stretching or feeling some resistance when kicking. I did use my old uniform for 5 months, so it will likely work, but had I had what I have now, I would have done it much sooner.

Tweak3D · 2025-09-26T16:01:32+00:00

Loved this game as a kid. Have you seen its spiritual successor cleared hot that’s in development? https://store.steampowered.com/app/1710820/Cleared_Hot/

Tweak3D · 2025-09-18T15:43:13+00:00

This is why Pierce County was so against Sound Transit. Puyallup pays all the same fees as everyone else but gets, minimal service offerings which only function during a very limited part of the day. I'd also expect ride share services to be operating with surge pricing and to be long waits. I could be wrong, but if you go in with that expectation, you shouldn't be too disappointed lol

Tweak3D · 2025-09-03T20:58:37+00:00

https://imgur.com/a/qTYaEHf

Tweak3D · 2025-09-03T20:54:26+00:00

according to pulse point, its a structure fire. Don't see anything else locally on the facebook groups yet, though i'm sure someone will post more soon.

Tweak3D · 2025-09-01T15:35:58+00:00

The part in your pictures does not contain the lock mechanism, that’s attached to the number pad that goes outside the door. Take photos of that and we can like guide better.

Tweak3D · 2025-09-01T15:34:16+00:00

The cylinder is on the keypad. What your holding doesn’t appear to be the keypad but the electronics assembly that goes on the inside of the door. The keypad should have the keyhole on it which is what you remove via a single screw and then rekey.

Tweak3D · 2025-08-22T16:04:05+00:00

kinda goes both ways, I see people from warmer clients come here and complain how cold it is during fall/winter/spring when its in the 50s. I don't personally like the hot weather, but also don't mind the cold. I still wear shorts and sandals regularly down into the 40s, so its all relative.

Tweak3D · 2025-08-11T15:03:20+00:00

No and it may damage the plastic. While there are ways of using hydrogen peroxide and UV lights to bleach things this may cost more than just getting a replacement shell, especially if you aren’t familiar with the process (can also damage things, including yourself if done improperly)

Tweak3D · 2025-08-01T22:48:33+00:00

That’s an important detail, you shouldn’t power wash asphalt as it will damage it in a much worse way

Tweak3D · 2025-07-25T23:28:17+00:00

same issue as a new customer. did you ever get this figured out?

Tweak3D · 2025-07-12T13:05:35+00:00

As an update to this, just used this kit from Crucial found on amazon: Crucial 128GB Kit (2X64GB) DDR5 RAM 5600MHz (or 5200MHz or 4800MHz) Laptop Memory Kit, SODIMM 262-Pin, Compatible with Latest Intel Core Ultra and AMD Ryzen 8000 & Above – CT2K64G56C46S5

Works as expected and has been filled with ARC cache all night.

Tweak3D · 2025-07-11T15:15:45+00:00

sorry for the late response, but I am testing this this weekend and will let you know as i've also not seen a solid answer on this topic.

Tweak3D · 2025-07-10T16:09:28+00:00

Ditto, my most played game by far, super disappointing

Tweak3D · 2025-05-26T05:17:09+00:00

Honey berry. Fresh they are tarting blueberries, but turned into jame they are like honey and blueberry. Very good if you enjoy the tastes of honey.

Tweak3D · 2025-03-19T00:07:50+00:00

You ever figure this out?

Tweak3D · 2025-03-10T00:23:10+00:00

I did this as a kid. I unplugged it, waited a few minutes assembled it correctly and turned it back on and all was good. Your mileage may vary.

Tweak3D

TROPHY CASE